Joint Targeting School Student Guide Effective 1 March 2017 Joint Targeting School Joint Targeting School Dam Neck Virginia 2 TABLE OF CONTENTS PREFACE 1 Scope 2 Purpose 3 Application 4 Command 5 5 5 5 5 CHAPTER I FUNDAMENTAL CONSTRUCTS SECTION A JOINT OPERATION PLANNING FUNCTIONS 1 Joint Operation Planning 2 Operational Art and Operational Design 3 Planning and Targeting During Execution 4 Assessment SECTION B FIRES AND TARGETING 1 Fires — A Joint Function 2 Targeting — A Fires Task and Process 3 Targets — Description Characteristics and Types 4 Categories of Targeting and Targets 6 6 6 12 24 25 26 26 27 29 35 CHAPTER II JOINT FORCE TARGETING DUTIES AND RESPONSIBILITIES SECTION A JOINT FORCE COMMANDER HEADQUARTERS 1 Joint Targeting Integration and Oversight 2 Joint Force Targeting Responsibilities 3 Joint Force Staff Responsibilities 4 Battle Rhythm SECTION B JOINT TASK FORCE COMPONENTS AND FORCES 1 Common Responsibilities 2 Functional and Service Component Commanders 38 38 38 39 45 49 52 52 53 CHAPTER III JOINT FIRES PLANNING AND TARGETING SECTION A JOINT FIRES PLANNING 1 General 2 Coordination and Synchronization 3 Planning Considerations SECTION B JOINT TARGETING CYCLE 1 Joint Targeting Cycle Introduction 2 Phase 1 – End State and Commander’s Objectives 3 Phase 2 – Target Development and Prioritization 4 Phase 3 – Capabilities Analysis 5 Phase 4 – Commander’s Decision and Force Assignment 6 Phase 5 – Mission Planning and Force Execution 7 Phase 6 – Targeting Assessment 73 73 73 75 83 95 95 96 113 136 142 152 161 CHAPTER IV PRODUCTS AND PROCESSES SECTION A LAND AND MARITIME COMPONENT INPUTS 1 General 2 Decide Detect Deliver and Assess Target Value Analysis 3 High-Payoff Target List 4 Intelligence Surveillance and Reconnaissance Plan 5 Attack Guidance 6 Targeting Synchronization Matrix 7 Delivery Standards Matrix 8 Time-Sensitive Targeting Decision Matrix 9 Target Report 174 174 174 175 177 181 185 186 187 188 190 3 SECTION B AIR COMPONENT INPUTS JOINT AIR TASKING CYCLE 1 General 2 Air Tasking Order 191 191 192 APPENDIX A INTELLIGENCE ORGANIZATIONS THAT SUPPORT TARGETING 1 Intelligence Support Architecture 2 Joint Staff J-2 Deputy Director for Targeting 3 Defense Intelligence Agency 4 National Joint Operations and Intelligence Center 5 National Security Agency Central Security Service 6 National Geospatial-Intelligence Agency 7 Defense Threat Reduction Agency 8 Joint Information Operations Warfare Command 9 Joint Warfare Analysis Center 10 Joint Technical Coordinating Group for Munitions Effectiveness 11 National Air and Space Intelligence Center 12 Non-Department of Defense Supporting Intelligence Organizations 199 199 199 200 200 200 201 201 201 202 202 202 203 APPENDIX B JOINT AND SERVICE COMMAND AND CONTROL SYSTEMS 1 Theater Air-Ground System 2 Army Air-Ground System 3 Air Force Theater Air Control System 4 Navy Tactical Air Control System 5 Marine Corps Air Command and Control System 6 Special Operations Airspace Control 204 204 207 207 208 209 211 APPENDIX C JOINT FIRES NETWORKED SYSTEMS 1 Advanced Field Artillery Tactical Data System 2 Joint Automated Deep Operations Coordination System 3 Modernized Integrated Database 4 Joint Targeting Toolbox 5 Theater Battle Management Core System 6 Distributed Common Ground Surface System 212 212 214 216 218 219 223 APPENDIX D DATUM AND COORDINATE SYSTEMS 1 Global Area Reference System 2 Target Point Mensuration 3 Basic Encyclopedia Number 224 224 225 227 APPENDIX E REFERENCES 1 Department of Defense Issuances 2 Chairman of the Joint Chiefs of Staff Directives 3 Joint Publications 4 Multi-Service Publications 5 Army 6 Air Force 7 Navy 8 Marine Corps 9 Non-Secure Internet Protocol Router Network 228 228 228 228 230 231 231 231 231 232 GLOSSARY PART I – ABBREVIATIONS AND ACRONYMS PART II – TERMS AND DEFINITIONS 233 233 241 4 PREFACE 1 Scope The Joint Targeting School Student Guide provides established and evolving tactics techniques and procedures used by personnel involved in day-to-day joint fires and targeting processes 2 Purpose This student guide serves as a bridge between current operational-level doctrine and tactical-level employment at the joint force level It is intended to inform doctrine writers educators and trainers about the joint targeting process It supplements not replaces existing joint or Service doctrine The student guide is designed for use by personnel assigned to or participating in a joint targeting effort It also presents well developed definitions that have been harmonized with joint doctrine and discusses those “best practices” that have proven of value during on-going military operations and exercises 3 Application This student guide is meant to educate the joint community about the joint fires and targeting processes that can be used by commanders and their staffs in joint force commands and subordinate units 4 Command The recommendations in this student guide are based on joint doctrine Service and multiService doctrine and Joint Staff and Department of Defense issuances as well as existing lessons learned and best practices observed during current and recent operations and exercises 5 CHAPTER I FUNDAMENTAL CONSTRUCTS SECTION A JOINT OPERATION PLANNING FUNCTIONS 1 Joint Operation Planning a Joint operation planning is the mechanism by which a JFC translates national military objectives into viable plans and orders for conducting military operations The JFC issues initial targeting guidance early in the planning effort The joint targeting process occurs within the context of joint operation planning both before and during execution During execution commanders and planners continue to consider elements of operational design and adjust both COPS and future plans to capitalize on tactical and operational successes as the joint operation unfolds b Adaptive Planning and Execution Joint operation planning occurs within Adaptive Planning and Execution APEX which is the department-level system of joint policies processes procedures and reporting structures APEX and the Joint Operational Planning Process JOPP share the same basic approach and problem-solving elements such as mission analysis and Corse of Action COA development The combination of APEX and JOPP promotes coherent planning across all levels of war and command echelons whether the requirement is for a limited single-phase operation such as noncombatant evacuation or for a multiphase campaign involving high-intensity combat operations 1 APEX formally integrates the planning activities of the entire joint planning and execution community during the initial planning and plan refinement that occurs both in peacetime and crisis APEX activities span many organizational levels but the focus is on the interaction between the SecDef and the CCDRs which ultimately helps the President and SecDef decide when where and how to commit US military forces in response to a foreseen contingency or an unforeseen crisis 2 APEX provides for orderly and coordinated problem solving and decisionmaking in two related but distinct categories — contingency planning and crisis action planning CAP These categories differ primarily in level of uncertainty amount of available planning time and products First the process is highly structured to support iterative concurrent and parallel contingency planning throughout the planning community to produce thorough and fully coordinated operation plans OPLANs when time permits Second the process is shortened in CAP as necessary to support the dynamic requirements of changing events During actual military operations the process adapts to accommodate greater decentralization of joint operation planning activities Contingency planning and CAP share common planning activities and are interrelated 6 c Joint Operation Planning Process JOPP The JOPP provides a methodical approach to planning at any organizational level and at any point before and during joint operations The focus of the JOPP is on the interaction between an organization’s commander staff the commanders and staffs of the next higher and lower commands and supporting commanders and their staffs Although the ultimate product is an OPLAN or operation order OPORD for a specific mission the process is continuous throughout an operation The JOPP is an orderly analytical process that consists of a logical set of steps to analyze a mission develop analyze and compare alternative COAs against criteria of success and each other select the best COA and produce a joint OPLAN or OPORD The JOPP focuses on defining the military mission and development and synchronization of detailed plans to accomplish that mission Commanders and staffs can apply the thinking methodology to discern the correct mission develop creative and adaptive CONOPS to accomplish the mission and synchronize those CONOPS so they can be executed It applies to both supported and supporting Joint Force Commanders JFCs and to joint force component commands when the components participate in joint planning Together with operational design the JOPP facilitates interaction between the commander staff and subordinate and supporting headquarters HQ throughout planning The JOPP helps commanders and their staffs organize their planning activities share a common understanding of the mission and commander’s intent and develop effective plans and orders Figure I-1 Joint Operation Planning Process Steps lists the JOPP steps Figure I-1 Joint Operation Planning Process Steps 1 Step 1 Initiation Joint operation planning begins when an appropriate authority recognizes a potential for military capability to be employed in response to a potential or actual crisis At the strategic level that authority — 7 the President Secretary of Defense SecDef or Chairman of the Joint Chiefs of Staff CJCS — initiates planning by deciding to develop military options Planning is continuous once execution begins However planning initiation during execution is still relevant when there are significant changes to the current mission or planning assumptions or the commander receives a mission for follow-on operations 2 Step 2 Mission Analysis Mission analysis is used to study the assigned tasks and to identify all other tasks necessary to accomplish the mission Mission analysis is critical because it provides direction to the commander and the staff enabling them to focus effectively on the problem at hand The commander’s staff is responsible for analyzing the mission and proposing if required the restated mission for the commander’s approval thus allowing subordinate and supporting commanders to begin their own estimate and planning efforts and for higher headquarters’ concurrence a The primary inputs to mission analysis are the higher headquarters’ planning directive other strategic guidance and the commander’s initial planning guidance Initial planning guidance may include a description of the OE a definition of the problem the operational approach initial intent and the joint intelligence preparation of the operational environment JIPOE During this step the JIPOE provides input to help frame the OE The JIPOE subsequently provides a comprehensive framework for intelligence surveillance and reconnaissance ISR support to planning and COA selection Consequently the JIPOE must assist commanders in anticipating enemy intent and enable them in preempting enemy actions b The JIPOE process continues throughout planning by examining adversary and friendly capabilities adversary intent and the OE Enemy and friendly centers of gravity COGs are also identified during this initial stage of the estimation process As mission analysis is refined through later stages of the estimation process enemy COGs are analyzed yielding critical vulnerabilities or other key system nodes These are further examined through target system or nodal analysis to yield target sets targets critical elements and aimpoints Such analysis carries a considerable information-flow cost In order to properly identify collection and exploitation requirements for targeting target system analysis TSA must begin well in advance of operations and must continue throughout them It must begin during the initial stages of the JIPOE and draw upon as much ongoing peacetime targeting material as is available for the OA c The primary products of mission analysis are staff estimates the mission statement a refined operational approach the commander’s intent statement updated planning guidance and commander’s critical information requirements CCIRs 8 For additional information on the JIPOE see JP 2-01 3 Joint Intelligence Preparation of the Operational Environment 3 Step 3 Course of Action Development COA A COA is a potential way i e solution or method to accomplish the assigned mission The staff develops COAs to provide unique choices to the commander all oriented on accomplishing the military end state a A good COA accomplishes the mission within the commander’s guidance provides flexibility to meet unforeseen events during execution and positions the joint force for future operations It also gives components the maximum latitude for initiative Since the operational approach contains the JFC’s broad approach to solve the problem at hand each COA will expand this concept with the additional details that describe what type of military action will occur why the action is required purpose who will take the action when the action will begin where the action will occur and how the action will occur method of employment of forces The staff converts the approved COA into a CONOPS COA determination consists of four primary activities COA development analysis and wargaming comparison and approval b To develop COAs the staff must focus on key information necessary to make decisions and assimilate the data in mission analysis Usually the staff develops no more than three COAs to focus their efforts and concentrate valuable resources on the most likely scenarios Embedded within COA development is the application of operational art Planners can vary COAs by adjusting the use of joint force capabilities throughout the OA by physical domain through the information environment and through cyberspace and by varying the combinations of these elements During COA development the commander and staff continue risk assessment focusing on identifying and assessing hazards to mission accomplishment Targeteers should provide their assessment of each COA’s feasibility during the development process The staff also continues to revise intelligence products Thus the JIPOE is refined during this stage and includes detailed analysis of COGs identified during mission analysis As a part of analysis of adversary capabilities and intentions one shall consider the potential impact on friendly desired effects and the likelihood that the adversary’s actions will cause specific undesired effects 4 Step 4 Course of Action Analysis and Wargaming a COA Analysis is the process of closely examining potential COAs to reveal details that will allow the commander and staff to tentatively identify COAs that are valid and then compare these COAs The commander and staff analyze each tentative COA separately according to the commander’s guidance COA analysis identifies advantages and 9 disadvantages of each proposed friendly COA While time-consuming COA analysis should answer two primary questions Is the COA feasible and is it acceptable b Wargaming is a primary means to conduct this analysis Wargaming is a conscious attempt to visualize the flow of the operation given joint force strengths and dispositions adversary capabilities and possible COAs the OA and other aspects of the OE Each critical event within a proposed COA should be wargamed based upon time available using the action reaction and counteraction method of friendly and or opposing force OPFOR interaction The basic wargaming method modified to fit the specific mission and OE can apply to noncombat as well as combat operations 5 Step 5 Course of Action Comparison COA comparison is a subjective process whereby COAs are considered independently of each other and evaluated compared against a set of criteria that are established by the staff and commander The goal is to identify and recommend the COA that has the highest probability of success against the enemy COA that is of the most concern to the commander COA comparison facilitates the commander’s decision-making process by balancing the ends means ways and risk of each COA The end product of this task is a briefing to the commander on a COA recommendation and a decision by the commander COA comparison helps the commander answer the following questions what are the differences between each COA What are the advantages and disadvantages What are the risks NOTE COA comparison remains a subjective process and should not be turned into a mathematical equation The key element in this process is the ability to articulate to the commander why one COA is preferred over another 6 Step 6 Course of Action Approval The staff determines the best COA to recommend to the commander The staff briefs the commander on the COA comparison and the analysis and wargaming results including a review of important supporting information This briefing often takes the form of a commander’s estimate The briefing should include a review of important supporting information such as the current status of the joint force the current JIPOE and assumptions used in COA development All principal staff directors and the component commanders should attend this briefing 7 Step 7 Plan or Order Development Deliberate planning will result in plan development while CAP typically will lead directly to OPORD development During plan or order development the commander and staff in collaboration with subordinate and supporting components and organizations expand the approved COA into a detailed joint OPLAN or OPORD by first developing an executable CONOPS — the eventual centerpiece of the OPLAN or OPORD 10 a The CONOPS clearly and concisely expresses what the JFC intends to accomplish and how it will be done using available resources It describes how the actions of the joint force components and supporting organizations will be integrated synchronized and phased to accomplish the mission including potential branches and sequels The commander defines responsibilities by providing guidance to the staff and subordinate commanders b The concept of fires is integral to the CONOPS The concept of fires describes how tactical operational and strategic joint fires as well as nonlethal capabilities will be synchronized to accomplish specific tasks that support the JFC’s desired effects and objectives Planners determine the enemy’s COGs critical factors and decisive points and how the joint force can apply fires to assist in creating desired effects The JFC can also highlight the anticipated critical actions times and places during combat that would serve as triggers for friendly action The JFC determines the sequencing of key events and emphasizes the desired end state Not all fires will directly support maneuver forces but all fires should support the JFC’s CONOPS and specified tasks to joint force components c The JFC provides fires and targeting guidance operational objectives desired effects tasks to subordinates and targeting fires priorities The CONOPS provides more detail on what where fires effects are desired by phase e g deny disrupt delay suppress neutralize destroy or influence In addition the JFC provides guidance on munitions usage and restrictions restricted targets and a no-strike list NSL d Targeting is integral to the concept of fires and OPLAN development and deliberate targeting is used to help determine and develop target sets and strategic targets included in the OPLAN and its attachments The joint air operations plan JAOP provides the joint componentlevel planning detail and guidance for joint targeting fires Even if targeting information developed during planning is not included in the OPLAN or its attachments OPLAN development requires considerable targeting effort to validate selected COAs CONOPS and other elements of the plan Commanders and planners must be able to estimate how much effort and what resources are required to accomplish the mission One way to determine this is to conduct some at least notional deliberate targeting well before the operation begins e The OPLAN should provide broad guidelines for prioritizing targets making clear which sets or systems are most important to the operation The OPLAN should also provide guidance on the sequencing of targeting actions or effects which is not the same thing as priority Although creating parallel effects is generally best some 11 targets must be attacked sequentially to enable effects against other targets For additional information on the JOPP see JP 5-0 Joint Operation Planning 2 Operational Art and Operational Design a The JFC and staff develop plans and orders through the application of operational art and operational design and by using the JOPP They combine art and science to develop products that describe how ways the joint force will employ its capabilities means to achieve the military end state ends Operational art is the application of creative imagination by commanders and staffs — supported by their skill knowledge and experience Operational design is a process of iterative understanding and problem framing that supports commanders and staffs in their application of operational art with tools and a methodology to conceive of and construct viable approaches to operations and campaigns Commanders who are skilled in the use of operational art provide the vision that links tactical actions to strategic objectives More specifically the interaction of operational art and operational design provides a bridge between strategy and tactics linking national strategic aims to tactical combat and noncombat operations that must be executed to accomplish these aims Likewise operational art promotes unified action by helping JFCs and staffs understand how to facilitate the integration of other agencies and multinational partners toward achieving strategic and operational objectives b The key to operational design essentially involves 1 understanding the strategic guidance determining the end state and objectives 2 identifying the adversary’s principal strengths and weaknesses and 3 developing an operational concept that will achieve strategic and operational objectives c Operational design supports operational art with a general methodology using elements of operational design for understanding the situation and the problem The methodology helps the JFC and staff to understand conceptually the broad solutions for attaining mission accomplishment and to reduce the uncertainty of a complex OE The elements of operational design are individual tools — such as termination military end state objectives effects COGs and lines of operation LOOs to help the JFC and the staff visualize and describe the broad operational approach These conceptual tools help commanders and their staffs think through the challenges of understanding the OE defining the problem and developing this approach which guides planning and shapes the CONOPS Targeteers must understand how joint force planners use these and other design elements during both planning and execution The following are a number of operational design elements that are particularly relevant to targeting and the targeteer’s understanding of planning For a complete understanding of all elements of operational design see JP 5-0 Joint Operation Planning 1 Termination Military End State and Objectives Strategic guidance is essential to operational art and operational design It should define what 12 constitutes “victory” or success ends and allocate adequate forces and resources means to achieve strategic objectives The operational approach ways of employing military capabilities to achieve the ends is for the supported JFC to develop and propose This guidance helps relate key elements of operational design such as termination end state objectives and effects Once the military end state is understood and termination criteria are established operational design continues with development of strategic and operational military objectives Effective planning cannot occur without a clear understanding of the end state and the conditions that must exist to end military operations a Termination criteria are developed first among the elements of operational design as they enable the development of the military end state and objectives Knowing when to terminate military operations and how to preserve achieved advantages is key to achieving the national strategic end state Termination criteria describe the standards that must be met before conclusion of a joint operation Termination criteria should account for a wide variety of operational tasks that the joint force may need to accomplish to include disengagement force protection transition to post-conflict operations reconstitution and redeployment b Military end state is the set of required conditions that defines achievement of all military objectives It normally represents a point in time and or circumstances beyond which the President does not require the military instrument of national power as the primary means to achieve remaining national objectives While it may mirror many of the conditions of the national strategic end state the military end state will typically be more specific and contain other supporting conditions Aside from its obvious association with strategic or operational objectives clearly defining the military end state promotes unity of effort facilitates synchronization and helps clarify and may reduce the risk associated with the campaign or operation c An objective is a clearly defined decisive and attainable goal toward which every military operation should be directed Once the military end state is understood and termination criteria are established operational design continues with the development of strategic and operational military objectives Tactical objectives are often associated with the specific “target” of an action In this context an objective could be a terrain feature the seizing or defending of which is essential to the commander’s plan It could also be an enemy force or capability the destruction of which creates a vulnerability for the adversary Objectives prescribe friendly goals They constitute the aim of military operations and are necessarily linked to national objectives simply defined as what we want to accomplish Military objectives are one of the most important considerations in campaign and operational design They specify what must be accomplished and provide the basis for describing desired effects 13 For additional information on termination military end state and objectives see JP 5-0 Joint Operation Planning 2 Effects Joint operation planning includes identifying desired effects i e the conditions necessary to achieve objectives and undesired effects those that can hinder or complicate mission accomplishment The use of effects during planning is reflected in the steps of the JOPP as a way to clarify the relationship between objectives and tasks Combined with a systems perspective commanders and staffs can use an understanding of desired and undesired effects to promote unified action with multinational and other agency partners a The use of effects in planning can help commanders and staffs determine the tasks required to achieve objectives and use other elements of operational design more effectively by clarifying the relationships between COGs LOOs and or lines of effort decisive points and termination criteria Once a systems perspective of the OE has been developed and appropriate links and nodes have been identified the linkage and relationship between COGs LOOs and decisive points can become more obvious This linkage allows for efficient use of desired effects in planning The JFC and planners continue to develop and refine desired effects throughout the JOPP Monitoring progress toward creating desired effects and avoiding undesired effects continues throughout execution b Effects and their accompanying causal linkages join tasks to objectives The tasks and effects in any causal chain can derive from any element of national power — diplomatic informational military or economic — and may occur at any point across the full range of military operations A single objective may require creating more than one effect Properly understanding the relationship among effects at all levels is important to planning and conducting any joint operation c Effects can be categorized in many ways One important distinction is between direct and indirect effects 14 1 Direct effects are the immediate first order consequence of a military action weapons employment results etc unaltered by intervening events or mechanisms They are usually immediate and easily recognizable For example the direct effects of leaflet drops may be the surrender of enemy soldiers or an increased participation by the local populace in elections but more assessment will need to occur before reaching this conclusion because other factors could cause this behavior Conversely the direct effect of jamming may be targeted cell phones or other communications devices are unusable by insurgents but this effect will not be immediately observable and should not be assumed to occur without evidence 2 Indirect effects are the delayed or displaced second- third- and higher-order consequences of action created through intermediate events or mechanisms These outcomes may be physical or behavioral in nature Indirect effects may be difficult to recognize due to subtle changes in system behavior that may make them difficult to observe For example an indirect effect of destroying a communications node or capturing a courier may be doing so prevents C2 of fielded enemy forces or distant terrorist cell leaders and degrades their effectiveness against friendly forces an effect with real benefits which are nonetheless hard to measure d Direct and indirect effects possess many characteristics that can qualitatively shape the OE Several of these are discussed below 1 Cumulative Effects Effects tend to compound such that the ultimate result of a number of direct effects and or indirect effects often combine to produce greater outcomes than the sum of their individual impacts 15 2 Cascading Effects Effects can ripple through a targeted system often influencing other systems as well most typically through nodes and links that are common and critical to related systems The cascading of direct and indirect effects as the name implies usually flows from higher to lower levels As an example destruction of a HQ element or capture of a terrorist senior leader will result in the loss of C2 and thus degrade the effectiveness of subordinate organizations 3 Unintended Effects Target effects often spill over to create unintended consequences which may be counterproductive or may create opportunities An example of a counterproductive consequence entails injury or collateral damage to persons or objects unrelated to the intended target Conversely some unforeseen effects may create opportunities the joint force can exploit to help accomplish objectives Unintended effects may also occur if the pre-strike analysis was incorrect and the enemy’s reaction differs from what we expected complicates operations or causes a change to operations e g we expected enemy withdrawal but they counterattacked with their strategic reserve instead The pre-strike analysis may also have miscalculated the local civilian population perceptions reactions and international public opinion ultimately resulting in more restrictions on target selection or engagement timing Planners and targeteers should consider second- third- and higher-order effects especially politicalmilitary effects during planning and assessment While estimating outcomes is rarely an exact process estimation becomes increasingly difficult as effects continue to compound and cascade through targets and target systems In addition the impact of a single event can often be magnified over time and distance that greatly exceeds the span of the direct effect associated with that one event e Lethal and Nonlethal Effects 1 Weapon systems deliver fires that are capable of producing both lethal and nonlethal effects on a target Lethal effects are produced through some combination of blast fragmentation cratering incendiary and kinetic penetration of the selected target Though highly effective for their intended purpose lethal effects may not always be suitable across the range of military operations That said planners and weaponeers should not arbitrarily exclude any capability that can create the desired effect s 2 The scalability selectability and responsiveness of nonlethal capabilities provide the JFC the means to target all target types The use of nonlethal capabilities may be particularly desirable when restraints on friendly weaponry tactics and levels of violence characterize the OE In some cases even carefully applied force with lethal weapons can result in negative public perceptions that could 16 adversely affect efforts to gain or maintain legitimacy and impede the attainment of both short- and long-term goals Escalation of force guidance in the form of rules of engagement ROE rules for the use of force RUF coupled with appropriate nonlethal capabilities can help avoid raising the level of conflict unnecessarily For additional information on effects see JP 5-0 Joint Operation Planning and JP 3-60 Joint Targeting 3 Center of Gravity One of the most important tasks confronting the JFC’s staff during planning is identifying and analyzing friendly and adversary COGs A COG is a source of power that provides moral or physical strength freedom of action or will to act It is what Clausewitz called “the hub of all power and movement on which everything depends the point at which all our energies should be directed ” An objective is always linked to a COG At the strategic level a COG could be a military force an alliance political or military leaders a set of critical capabilities or functions or national will At the operational level a COG is often associated with the adversary’s military capabilities — such as a powerful element of the armed forces — but could include other capabilities in the OE Since the adversary will protect the COG it invariably is found among strengths rather than among weaknesses or vulnerabilities Commanders consider not only the enemy COGs but also identify and protect their own COGs a Systems Perspective A systems perspective of the OE see Figure I-4 Systems Perspective of the Operational Environment assists with identification of adversary COGs and their critical capabilities requirements and vulnerabilities In combat operations this involves knowing an adversary’s physical and psychological strengths and weaknesses and how the adversary organizes fights and makes decisions Moreover the JFC and staff including targeteers must understand strengths and weaknesses in other OE systems political military economic social information and infrastructure PMESII and their interaction with the military system The staff under the intelligence directorate’s J-2 lead analyzes the relevant systems in the OE based on understanding strategic objectives desired effects and the joint force’s mission This analysis identifies a number of nodes and links Identifying nodes and their links helps the staff assess the systems’ important capabilities and vulnerabilities and is the foundation of the systems perspective of the OE This analysis identifies the interrelationship of systems and capabilities within an adversary’s COG s and decisive points points for action to influence or change an adversary system behavior A clear understanding of these relationships will help the JFC and staff in the identification of effective options to defeat the COG 17 Figure I-2 Systems Perspective of the Operational Environment 1 Nodes and Links System nodes are the tangible elements within a system that can be “targeted” for action such as people materiel and facilities Links are the behavioral or functional relationships between nodes such as the command or supervisory arrangement that connects a superior to a subordinate the relationship of a vehicle to a fuel source and the ideology that connects a propagandist to a group of terrorists Links establish the interconnectivity between nodes that allows them to function as a system — to behave in a specific way accomplish a task or perform a function 2 Thus the purpose in targeting specific nodes is often to destroy interrupt or otherwise affect the relationship between them and other nodes which ultimately influences the system as a whole Analysts link nodes to each other with sufficient detail to inform the JFC of potential key nodes These are nodes related to a strategic or operational effect or a COG Some may become decisive points for military operations since when acted upon they could allow the JFC to gain a marked advantage over the adversary or contribute materially to attaining a desired effect Key nodes are likely to be linked to or resident in multiple systems Since each adversary system infrastructure social etc is composed of nodes and links the capabilities of US instruments 18 of national power can be employed against selected key nodes to attain operational and strategic effects b A COG typically will not be a single node in the system but will consist of a set of nodes and their respective links relationships For example Figure I-5 Analyzing Critical Factors shows a notional adversary’s strategic and operational COGs each consisting of a set of nodes and links The operational COG in this example resides in the military system while the strategic COG focuses in the political system but overlaps with the operational COG However a COG that appears entirely military on the surface often will have underlying links to key nodes in other systems A single node might be considered a COG as an exception such as when the adversary senior military leader is also the political leader and the nature of the adversary’s political and military systems is such that the leader’s demise would cause support for the conflict by other leaders in these systems to collapse Also systems are viewed differently at different levels For example the CCDR might consider an adversary’s key military capability to be a single node in the adversary’s military system while a JFC who must attack this capability would analyze it as a system of nodes and links in an effort to determine its critical capabilities and vulnerabilities 19 Figure I-3 Critical Factors For additional information on systems perspective see JP 2-01 3 Joint Intelligence Preparation of the Operational Environment c COG Analysis COG analysis is important to targeting efforts because it identifies the adversary’s physical and psychological strengths and weaknesses and how the adversary organizes fights and makes decisions This analysis helps identify where those sources of power are vulnerable where critical nodes within them are and how they can be exploited 1 Critical Factors Analysis begins with the COG as a source of power The analysis identifies the inherent abilities that allows the COG to act 20 as such critical capabilities identifies the essential conditions resources or means critical requirements that allow the COG to operate and then determines where those critical requirements are vulnerable critical vulnerabilities CVs Collectively these are called critical factors While it can sometimes be difficult to pick CVs from critical requirements or translate the former into explicit target sets target system and nodal analysis performed during target development can help “operationalize” this technique’s insights Figure I-4 Critical Factors 2 Figure I-5 shows notional critical factors associated with the strategic and operational-level COGs depicted in Figure I-4 For example the J2 determines the air defense AD system is the critical capability for the operational-level COG — the armored corps — and the radar network is the CV for the AD system due to the overmatching capabilities of the joint force’s anti-radiation missiles This assessment likely will result in fires and targeting tasks to the joint force air component commander JFACC relative to neutralizing the AD system so the maneuver divisions become vulnerable d Once the systems analysis is mature the planners should then try to identify the critical factors within that system Those elements or functions that enable the COG are its critical capabilities Once these are identified planners should determine the critical requirements and CVs When identifying friendly and adversary CVs the JFC and staff will understandably want to focus their efforts against the CV that will do the most decisive damage to an adversary’s COG However in selecting those CVs planners must also compare their criticality with their accessibility vulnerability redundancy ability to recuperate and impact on the civilian populace then balance those factors against friendly capabilities to affect those vulnerabilities The JFC’s goal is to seek opportunities aggressively to apply force against an adversary in as vulnerable an aspect as possible and in as many dimensions as possible In other words the JFC seeks to undermine the adversary’s strength by exploiting adversary vulnerabilities while protecting friendly vulnerabilities from adversaries attempting to do the same 21 For additional information on COG analysis see JP 5-0 Joint Operation Planning 4 Decisive Points Commanders and their staffs identify decisive points to help them determine where and how to apply friendly capabilities to exploit adversary vulnerabilities A decisive point is a geographic place specific key event critical factor or function that when acted upon allows a commander to gain a marked advantage over an adversary or contributes materially to achieving success e g creating a desired effect achieving an objective The most important decisive points can be determined from analysis of critical factors As part of the node-link analysis associated with a systems perspective understanding the relationship between a COG’s critical capabilities requirements and vulnerabilities can illuminate direct and indirect approaches to the COG It is likely most of these critical factors will be decisive points which should then be further addressed in the planning process 5 Direct Versus Indirect Approach The approach is the manner in which a commander contends with a COG there are generally three approaches from which to choose The decision facing the commander is whether to attack the COG directly indirectly or through a combination of the two A direct approach attacks the enemy’s COG or principal strength by applying combat power directly against it However COGs are generally well protected and not vulnerable to a direct approach Thus commanders usually choose an indirect approach An indirect approach attacks the enemy’s COG by applying combat power against a series of decisive points that lead to the defeat of the COG while avoiding enemy strength In theory direct attacks against adversary COGs resulting in their neutralization or destruction provide the most direct path to victory — if this can be done in a prudent manner In the event a direct attack is not a reasonable solution JFCs should seek an indirect approach until conditions are established that permit successful direct attacks In this manner the adversary’s derived vulnerabilities can offer indirect pathways to gain leverage over its COGs For additional information on direct versus indirect approach see JP 5-0 Joint Operation Planning 6 Lines of Operations and Lines of Effort a Lines of Operation LOOs describe and connect a series of decisive actions that lead to control of a geographic or force-oriented objective Operations designed using LOOs generally consist of a series of actions executed according to a well-defined sequence although multiple LOOs can exist at the same time parallel operations Major combat operations are typically designed using LOOs These lines tie offensive defensive and stability tasks to the geographic and positional references in the OA 22 Commanders synchronize activities along complementary LOOs to achieve the end state 1 Interior Lines A force operates on interior lines when its operations diverge from a central point Interior lines usually represent central position where a friendly force can reinforce or concentrate its elements faster than the enemy force can reposition With interior lines friendly forces are closer to separate enemy forces than the enemy forces are to one another Interior lines allow an isolated force to mass combat power against a specific portion of an enemy force by shifting capabilities more rapidly than the enemy can react 2 Exterior Lines A force operates on exterior lines when its operations converge on the enemy Operations on exterior lines offer opportunities to encircle and annihilate an enemy force However these operations typically require a force stronger or more mobile than the enemy 3 The relevance of interior and exterior lines depends on the time and space relationship between the OPFORs Although an enemy force may have interior lines with respect to the friendly force this advantage disappears if the friendly force is more agile and operates at a higher tempo Conversely if a smaller friendly force maneuvers to apposition between larger but less agile enemy forces the friendly force may be able to defeat them in detail before they can react effectively b Lines of Effort A line of effort links multiple tasks and missions using the logic of purpose — cause and effect — to focus efforts toward establishing operational and strategic conditions Lines of effort are essential to operational design when positional references to an enemy or adversary have little relevance such as in counterinsurgency or stability operations In operations involving many nonmilitary factors lines of effort may be the only way to link tasks effects conditions and the desired end state A full array of lines of effort might include offensive and defensive lines as well as lines for public affairs PA IO and integrated financial operations All typically produce effects across multiple lines of effort c Combining Lines of Operation and Lines of Effort Commanders may use both LOOs and lines of effort to connect objectives to a central unifying purpose Lines of effort can also link objectives decisive points and COGs Combining LOOs and lines of effort allows commanders to include nonmilitary activities in their operational design This combination helps commanders incorporate stability tasks into their operational approach that are necessary to reach the end state It allows commanders to consider the less tangible aspects of the OE where the 23 other instruments of national power or nontraditional military activities may dominate For additional information on LOOs and lines of effort see JP 5-0 Joint Operation Planning 3 Planning and Targeting During Execution Like most complex organizations JFCs have long- mid- and near-term goals Joint task forces JTFs organize to conduct future planning future operations planning and COPS planning The division of labor between these planning efforts is linked to time or events and is situation as well as the level of command dependent Using time horizons to delineate responsibilities a JFC HQ may focus COPS on activities inside of 24 hours focus future operations on activities between 24 and 96 hours and focus future plans on activities beyond 96 hours and up to six months The joint force battle rhythm and the JFC’s decision cycle are two factors that may also affect planning in these timeframes with the greatest potential impact on COPS planning The JTC and supporting component processes such as the JFACC’s six-stage air tasking cycle must adapt to the joint force battle rhythm and decision cycle a Future Plans The joint force J-5’s effort focuses on future plans The timeframe of focus for this effort varies according to the level of command type of operation desires of the JFC and other factors Typically the emphasis of the future plans effort is on planning the next phase of operations sequels to the current operation In a campaign this could be planning the next major operation the next phase of the campaign b Future Operations Planning The focus of the JTF’s future operations is the development of orders and FRAGORDs that are beneath the threshold of the long-term efforts of the future plans but are not directly related to the management of COPS Future planning processes and products generally require significant coordination with elements internal to the JTF The timeframe of focus for future operations planning varies according to the factors listed for future plans but the period typically is more near-term than the future plans timeframe Future planning could occur in the J-5 or joint planning group while future operations planning could occur in the JOC or J-3 c COPS planning addresses the immediate or very near-term planning issues associated with ongoing operations This normally occurs in the JOC or J-3 For additional information on planning during execution see JP 5-0 Joint Operation Planning For additional information on the JFC JTF battle rhythm the commander’s decision cycle and other factors that can affect joint targeting and the synchronization of plans and operations see JP 3-33 Joint Task Force Headquarters 24 4 Assessment a Assessment is a continuous process that measures progress of the joint force toward mission accomplishment The JFC and component commanders continuously assess the OE and the progress of operations and compare them to their initial vision and intent Commanders adjust operations based on their assessment to ensure objectives are met and the military end state is achieved b The assessment process begins during mission analysis when the commander and staff consider what to measure and how to measure it to determine progress toward accomplishing a task creating an effect or achieving an objective The process continues throughout execution c As a general rule the level at which a specific operation task or action is directed should be the level at which such activity is assessed Since the direct effects of target engagement typically reside at the tactical level the JTC focuses on combat assessment CA to determine qualitative and quantitative results of fire efforts 1 CA is the primary process to determine the performance of target engagement relative to desired target effects with both lethal and nonlethal capabilities It is an important component of joint fires and the joint targeting process 2 The staff consolidates and integrates CA results with other assessment results to provide a complete picture of progress during the joint operation For additional information on assessment refer to Chapter III “Joint Fires Planning and Targeting ” 25 SECTION B FIRES AND TARGETING 1 Fires — A Joint Function a Joint functions are related capabilities and activities grouped together to help joint force commanders JFCs integrate synchronize and direct joint operations Functions that are common to joint operations at all levels of war fall into six basic groups — command and control C2 intelligence fires movement and maneuver protection and sustainment Some functions such as C2 and intelligence apply to all operations Others such as fires apply as required by the JFC’s mission A number of subordinate tasks and related capabilities help define each function b Fires are defined as the use of weapon systems or other actions to create a specific lethal or nonlethal effects on a target Examples of nonlethal fires to create effects at all levels of war include information operations IO electronic attack EA military information support operations MISO space operations and cyberspace operations CO c Employing Fires Policy guidance and planning for the employment of operational and strategic fires are primarily joint functions Joint fires are delivered during the employment of forces from two or more components in coordinated action to create desired effects in support of a common objective Fires typically produce destructive effects but some ways and means such as EA can be employed with little or no associated physical destruction The fires function encompasses a number of tasks or missions actions and processes including 1 Conduct Joint Targeting This is the process of selecting and prioritizing targets and matching the appropriate response to them taking into account operational requirements and capabilities 2 Provide Joint Fire Support This task includes joint fires that assist air land maritime and special operations forces SOF to move maneuver and control territory populations airspace and key waters in support of the JFC’s scheme of maneuver 3 Countering Air and Missile Threats This task integrates offensive and defensive operations and capabilities to attain and maintain a desired degree of air superiority and force protection These operations are designed to destroy or negate enemy aircraft and missiles both before and after launch 4 Interdict Enemy Capabilities Interdiction diverts disrupts delays or destroys the enemy’s military surface capability before it can be used effectively against friendly forces or to otherwise achieve objectives 26 5 Conduct Strategic Attack This task includes offensive action against targets — whether military political economic or other — which are selected specifically to achieve strategic objectives 6 Employ Information Operations Capabilities This task focuses on military actions involving the use of electronic warfare EW and MISO It may involve targeting key leaders and influential groups to affect decisionmaking processes 7 Assess The Results Of Employing Fires This task includes assessing the effectiveness and performance of fires as well as their contribution to the larger operation or objective For additional information on joint functions see Joint Publication JP 3-0 Joint Operations and JP 5-0 Joint Operation Planning 2 Targeting — A Fires Task and Process a Joint targeting is a fundamental task of the fires function that encompasses many disciplines and requires participation from many joint force staff elements and components along with numerous nonmilitary agencies b Purpose The purpose of targeting is to integrate and synchronize fires into joint operations by utilizing available capabilities to generate a specific lethal or nonlethal effect on a target Joint targeting helps integrate and synchronize fires with other joint functions C2 intelligence movement and maneuver protection and sustainment during the joint operation planning process JOPP Principles of joint targeting can apply in multinational operations and may involve participation from other agencies governments and organizations Joint targeting supports unity of effort by providing 1 Compliance with JFC objectives guidance and intent 2 Coordination integration synchronization and deconfliction of target engagement 3 A common perspective on all targeting efforts performed in support of the commander 4 Reduced duplication of effort 5 Full integration of all available target engagement capabilities 27 6 Reduced chance of friendly fire and collateral damage 7 Focus on creating effects to achieve objectives in support of the commander’s plan 8 Expeditious assessment of targeting effects c Targeting systematically analyzes and prioritizes targets and matches appropriate lethal and nonlethal actions to those targets to create specific desired effects that achieve the JFC’s objectives accounting for operational requirements capabilities and the results of previous assessments The emphasis of targeting is on identifying resources targets the enemy can least afford to lose or that provide him with the greatest advantage high-value target HVT then further identifying the subset of those targets which must be acquired and engaged to achieve friendly success high-payoff target HPT Targeting links the desired effects to actions and tasks This contributes to creating the effects necessary to achieve the JFC’s objectives d Principles of Targeting The joint targeting cycle JTC is designed to achieve the JFC’s objectives through joint fires Adherence to four targeting principles throughout the targeting cycle should create desired effects while diminishing undesired or adverse collateral effects 1 Focused The targeting process is focused on achieving the JFC’s objectives It is the function of targeting to efficiently achieve those objectives within the parameters set by the concept of operations CONOPS directed limitations the ROE the law of war LOW and agreements concerning the sovereignty of national territories Every target nominated should contribute to attaining the JFC’s objectives 2 Effects-based To contribute to the achievement of the JFC’s objectives targeting is concerned with the creation of specific desired effects through target engagement Target analysis considers all possible means to create desired effects drawing from all available capabilities The art of targeting seeks to create desired effects with the least risk and expenditure of time and resources 3 Interdisciplinary Joint targeting is a command function that requires the participation of many disciplines This entails participation from all elements of the JFC’s staff component commanders’ staffs other agencies and organizations and multinational partners as illustrated in Figure I-4 Interdiscipline Participation in Targeting 4 Systematic The JTC is designed to create effects through target engagement in a systematic manner It is a rational and iterative process that methodically analyzes prioritizes and assigns assets against targets systematically If the desired effects are not created targets are recycled through the process 28 Figure I-4 Interdiscipline Participation in Targeting For additional information on the principles of targeting see JP 3-60 Joint Targeting 3 Targets — Description Characteristics and Types a Target A target is an entity person place or thing considered for possible engagement or action to alter or neutralize the function it performs for the adversary However the target itself is not necessarily the adversary or even aligned with the adversary as in the case of a target audience or population A target’s importance derives from its potential contribution to achieving a commander’s objective s CO or otherwise accomplishing assigned tasks These 29 objectives must be consistent with national strategic direction and selected to accomplish the assigned missions and tasks Targets nominated for engagement may include the following 1 Facility A real property entity consisting of one or more of the following a building a structure a utility system pavement and underlying land These measurable geophysical parameters define the real property In the context of entity-level target development a facility provides a function that contributes to a target system’s capability Note A facility entity should not be confused with an installation which is a grouping of associated functionally-related facilities normally geolocated adjacent to each other 2 Entity Within the context of targeting a term used to describe facilities organizations individuals equipment or virtual nontangible things 3 Individual s a person or persons who provide a function that contributes to a target system’s capability 4 Virtual an entity typically found in cyberspace and the electro-magnetic spectrum that provides a function that contributes to a target system’s capability Examples of virtual entities include web sites cyber persona applications and financial accounts 5 Equipment a tangible device that provides a function that contributes to a target system’s capability 6 Organization a group or unit that provides a function that contributes to a target system’s capability Examples of organization entities include front companies corporations nongovernmental organizations NGOs and military units Note a terrorist network is the adversary not the target A terrorist training unit working on behalf of the terrorist network is an organization b Target Characteristics Every target has distinct intrinsic or acquired characteristics that form the basis for target detection location identification and classification for ongoing and future surveillance analysis engagement and assessment There are five categories of characteristics by which targets may be defined physical functional cognitive environmental and temporal The lists of example characteristics are not intended to be exhaustive and some characteristics may belong in more than one category 30 1 Physical Characteristics These are features that describe a target They are discernable to the five senses or through sensor-derived signatures Furthermore they may shape or influence the selection of the type and number of weapons the weapon systems and the methods or tactics employed against the target a Location b Shape c Size or area covered d Appearance outward form and features including color e Number and nature of elements f Dispersion or concentration of elements that make up the target as a whole g Reflectivity to heat light sound radar energy etc h Structural composition i Degree of hardening j Electromagnetic EM radiation e g radar and radio transmissions k Target’s mobility characteristics fixed unable to move transportable operate from fixed locations but can be broken down and moved mobile operates on the move or with very limited setup time 2 Functional Characteristics These are features that describe what the target does and how it does it They describe the target’s function within a greater system how the target or target system operates its level of activity the status of its functionality and in some cases its importance to the enemy Functional characteristics are difficult to discern because they most often cannot be directly observed Reaching plausible conclusions can often entail careful assessment of known facts Functional characteristics include a Target normal or reported activity b Target status state or condition at a given point in time e g “operational ” “inoperative” c Degree proportion or percentage of functionality e g “function 50 percent degraded” 31 d Materials the target requires to perform its function s e Functional redundancy Can the target’s function be performed elsewhere or by a similar capability in an alternate target system f Ability to reconstitute itself or its function g Self-defense capability h Importance within the enemy’s strategic structure such as its role in the geopolitical system or its cultural importance i Necessary relationships see the discussion of the systems perspective of the OE later in this section 1 If the target is a person or group what other people or groups are necessary to enable it to function 2 What is the nature of the connectivity between this person or group and others j Target physical vulnerabilities Identification of potential aim points above ground natural ventilation exposure of critical infrastructure dependence on above ground functions facilities etc 3 Cognitive Characteristics These are features that describe how some targets think exercise control functions or otherwise process information In those cases where the entity is an individual cognitive characteristics are focused on describing that person’s reasoning patterns or how that person’s decision making is influenced These characteristics are particularly important to properly assess the critical nodes in a target system since nearly every system possesses some central controlling function Neutralizing this function may be crucial to bringing about desired changes in behavior As with functional characteristics these can be difficult to discern or deduce Cognitive characteristics may relate to a How the target processes information b How the target’s decision cycle works if applicable c Process inputs the target requires performing its function s d Process outputs to the processes the target performs e How much information the target can handle f How the target or system stores information 32 g Whether the target is an individual or organization How does the target think What are its motivations What’s the target’s behavior What are the target’s rules norms and beliefs What are its cognitive vulnerabilities h Cultural considerations perceptions attitudes religious factions tribal affiliations 4 Environmental Characteristics These characteristics describe the effect of the environment on the target and its surroundings These factors may also affect the types and numbers of weapons weapon systems and the methods used to attack them a Atmospheric conditions affecting the target such as temperature and visibility b Terrain features such as land form vegetation soil elevation c Degree of denial and deception measures d Physical relationships such as proximity to civilians noncombatants or friendly forces e Dependencies such as raw materials personnel energy water C2 5 Temporal Characteristics The factor of time as a characteristic of a target describes the target’s vulnerability to detection attack or other engagement in terms of time available All potential targets and all targets nominated for attack continually change in priority due to the dynamic nature of the evolving operational environment OE Many targets may be fleeting and some may be critical to friendly operations Those that are both fleeting and critical present one of the biggest targeting challenges faced by the joint force This characteristic can help planners determine when and how to find or engage a target By comparing this factor to information latency and knowledge of friendly capabilities the staff can make better recommendations to the commander regarding possible actions Many factors may contribute to this a Time of appearance The expected time the target will appear in the designated operational area OA b Dwell time The length of time a target is expected to remain in one location this can be directly related to the physical characteristic of target mobility Generally a target is more difficult to find or engage on the move 33 c Time to target functionality The length of time required for the target to become operational to conduct its mission or to repair or reconstitute d Identifiable time The length of time a target is identifiable as a threat before it then becomes indistinguishable from other objects in the OE For additional information on target characteristics see JP 3-60 Joint Targeting c Sensitive targets are those targets for which planned actions warrant President or the SecDef review and approval Criteria normally are delineated in plans orders and or ROE by combatant commanders CCDRs Sensitive targets exceed national-level thresholds such as high collateral damage or collateral effect e g versus civilian population property infrastructure facilities adverse political or diplomatic ramifications e g near the territory of surrounding states environmental harm or hazard or adverse public sentiment For additional information on sensitive targets see Chairman of the Joint Chiefs of Staff Instruction CJCSI 3122 06D Sensitive Target Approval and Review STAR Process Classified d Certain targets may require special care or caution in treatment engaging them improperly could lead to major adverse consequences Examples include leadership targets high-value individuals HVIs that must be handled sensitively due to potential political repercussions targets located in areas with a high risk of collateral damage and weapons of mass destruction WMD facilities where an improper attack could lead to major long-term environmental damage Such targets are often characterized as “sensitive” in one respect or another without having the intrinsic characteristics by definition of a sensitive target The use of nonlethal capabilities in support of such operations may reduce the potential for unintended consequences that are detrimental to the JFC’s strategic goals e Time Sensitive Targets A time sensitive target TST is a JFC-validated target or set of targets requiring immediate response because it is a highly lucrative fleeting target of opportunity or it poses or will soon pose a danger to friendly forces A TST is a highly-lucrative fleeting target of opportunity only differing from other such highly lucrative fleeting targets of opportunity due the process of validation and classification as TSTs As such TSTs are listed in the CONOPS 1 Targets that are both fleeting and critical present one of the biggest targeting challenges faced by the joint force Advances in surveillance technology and weaponry make it possible in some instances to detect track and engage high-priority targets in real time or to thwart emerging enemy actions before they become dangerous to the joint force A JFC can classify a target prosecuted in this manner as a TST While TSTs tend to be targeted via the dynamic targeting process they may be prosecuted using either deliberate or 34 dynamic processes A TST can belong to either of the two target categories discussed in section 4 below 2 The JFC provides specific guidance and priorities for TSTs within the operational area OA Examples might be a WMD-capable combat vessel that was just detected approaching the joint force a sought-after enemy national leader whose location was just identified an enemy aircraft detected approaching friendly high-value assets or launch of an intermediate-range ballistic missile Only the JFC designates TSTs However there may be other targets requiring “time-sensitive” treatment which are of concern primarily to the JFC’s component commanders vital to their schemes of maneuver or immediately threatening their forces for instance the JFC may not deem to be TSTs These targets are prosecuted using the same dynamic targeting methodology as TSTs even though they may not be designated as such f Component-Critical Targets Component commanders may nominate targets to the JFC for consideration as TSTs These component high-priority targets if not approved as TSTs by the JFC may require both dynamic prosecution and crosscomponent coordination and assistance in a time-compressed fashion The JFC and component commanders should identify these targets within the JTC provide clear guidance to ensure the appropriate priority of asset allocation intelligence collection exploitation and attack assets and provide ROE to facilitate rapid cross-component coordination in order to minimize confusion and facilitate prosecution Although there is no doctrinally-approved term and definition for these targets they are component-level high-priority targets and they should receive the highest engagement priority possible just below targets identified on the JFC's TST list For additional information on component critical targets see Army Tactical Publication ATP 3-60 1 Marine Corps Reference Publication MCRP 3-16D Navy Tactics Techniques and Procedures NTTP 3-60 1 Air Force Tactics Techniques and Procedures AFTTP 3-2 3 Multi-Service Tactics Techniques and Procedures MTTP for Dynamic Targeting g High-Value and High-Payoff Targets A High-Value Target HVT is a target the enemy commander requires for the successful completion of the mission A High-Payoff Target HPT is derived from the list of HVTs The loss of HVTs would be expected to seriously degrade important enemy functions throughout the friendly commander’s area of interest A HPT is one whose loss to the enemy will significantly contribute to the success of the friendly course of action COA Time-sensitive and component-critical targets are usually special types of HPTs Component and JFC target development and priorities will focus on these targets to support success of the mission 4 Categories of Targeting and Targets a Targeting Categories The targeting process may be grouped into two categories deliberate and dynamic Neither is indicative of the target to be 35 engaged but is more closely aligned with the planning phase in which the target is identified and prosecuted Timing is the primary factor that determines whether deliberate or dynamic targeting will support the JFC’s targeting requirements see Figure I-5 Categories of Targeting and Targets Figure I-5 Categories of Targeting and Targets 1 Deliberate targeting normally supports the joint force’s future plans effort which is overseen by the plans directorate of a joint staff J-5 The timing of focus for this effort varies according to the level of command type of operation JFC’s desires and other factors Normally the future operations directorate focuses on 24 hours out to 72 hours This is a critical linkage during targeting execution Typically the emphasis of the future plans effort is on planning the next phase of operations sequels to the current operation In a campaign this could be planning the next major operation 2 Dynamic targeting is normally employed in current operations planning because the nature and timeframe usually the current 24-hour period typically requires more immediate responsiveness than is achieved in deliberate targeting Current operational planning addresses the immediate or very near-term planning issues associated with ongoing operations which usually occur in the joint operations center JOC under the operations directorate of a joint staff J-3 Dynamic targeting prosecutes changes to planned targets or objectives and targets of opportunity b Target Categories Targets may be described as two different categories planned targets and TOO Each has two separate subcategories 1 Planned Planned targets are known to exist in the OE with engagement actions planned against them using the deliberate targeting process Examples 36 range from targets being engaged through ongoing shaping activities targets on joint target lists JTLs in the applicable operations plan to targets detected in sufficient time to list in an air tasking order ATO mission-type orders attack guidance matrix AGM fragmentary orders FRAGORDs or fire support plans Planned targets may be further divided into scheduled targets and on-call targets depending upon an event or condition set that prompts engagement a Scheduled Scheduled targets are prosecuted at a specific time b On-call On-call targets have actions planned but not for a specific delivery time The commander expects to locate these targets in sufficient time to execute planned actions These targets are unique in that actions are planned against them using deliberate targeting but execution will normally be conducted using dynamic targeting 2 Targets of opportunity Targets of opportunity are those targets that meet the criteria to achieve objectives but were not selected for action during the current JTC These can be divided into two subgroups unplanned targets and unanticipated targets These targets often cause deliberate plans to change and are best managed using dynamic targeting a Unplanned Unplanned targets are known targets and are included on a target list but not selected for engagement because the target was not nominated was nominated but did not make the joint integrated prioritized target list JIPTL or was not expected to be available for engagement within the target cycle However changes to the target status priority access permissions could result in the need or opportunity to engage the target during the current cycle b Unanticipated Unanticipated targets are unknown or not expected to be present in the OE These targets are not included on a target list and an evaluation of the target is needed to determine engagement requirements and timing In some cases the target will require engagement in the current targeting cycle and will require use of dynamic targeting In other cases the target will be identified and processed as a new target for inclusion on the appropriate targeting list through normal target development For additional information on categories of targeting and targets see JP 3-60 Joint Targeting 37 CHAPTER II JOINT FORCE TARGETING DUTIES AND RESPONSIBILITIES SECTION A JOINT FORCE COMMANDER HEADQUARTERS 1 Joint Targeting Integration and Oversight a The JFC’s primary targeting responsibility lies in establishing the objectives that component commanders will achieve throughout the OE with their forces assigned attached and supporting With the advice of subordinate component commanders JFCs set priorities provide clear targeting guidance and determine the weight of effort to be provided to various operations Joint force and component commanders identify HVTs and HPTs for acquisition collection and attack or influence employing their forces in accordance with the JFC’s guidance b Friendly Fire Prevention Throughout the targeting process JFCs and component commanders should establish safeguards to reduce the possibility of friendly fire Knowledge of friendly forces position and intended scheme of maneuver in relation to select targets aids in friendly fire prevention Friendly fire prevention is a key consideration of risk assessment throughout the entire spectrum of anticipated targeting timelines from long-term to rapidly-changing time-sensitive situations Although the JFC may justifiably elect to accept additional risk during time sensitive targeting particularly for HVTs or HPTs appropriate friendly fire prevention measures must still be in place and followed c Collateral Damage Prevention The US places a high value on preserving civilian and noncombatant lives and property and seeks to accomplish its mission through the discriminate application of force with minimal collateral damage Joint standards and methods for estimating collateral damage potential provide mitigation techniques and assist commanders with weighing collateral risk against military necessity and assessing proportionality within the framework of the military decision-making process Joint standards and methods for conducting collateral damage estimation CDE are stipulated in CJCSI 3160 01 Series NoStrike and the Collateral Damage Estimation Methodology d Targeting Organizational Structure The joint targeting process crosses traditional functional and organizational boundaries Operations plans and intelligence personnel are the primary participants but other functional area e g logistics weather legal and communications subject matter experts SMEs also support the JTC Therefore the organizational structure established by the JFC should be functionally inclusive responsive and flexible enough to adapt to a range of situations In addition JFCs should arrange their joint targeting organizational structure based upon assigned attached and supporting forces as well as the threat mission and OA Ultimately the organizational design must be able to identify adversary critical vulnerabilities and execute all phases of joint targeting efficiently and continuously 38 e Other Considerations Offensive military activities e g EA offensive cyberspace operations OCO and information-related capabilities IRCs should be coordinated and deconflicted with the joint targeting process f Targeting Integration via Joint and Component Operations Centers The joint intelligence operations center JIOC JOC and or component command centers plan for and conduct operations Targeting mechanisms should exist at multiple levels Joint force components identify requirements nominate targets that are outside their boundaries or exceed the capabilities of organic or supporting assets based on the JFC’s apportionment decision and conduct execution planning After the JFC makes the targeting and apportionment decisions components plan and execute assigned missions through their respective operations centers The theater air ground system is normally the C2 structure through which targeting should be integrated For additional information on joint targeting integration and oversight see JP 3-60 Joint Targeting 2 Joint Force Targeting Responsibilities a Joint Force Commander Responsibilities The JFC has the responsibility to conduct planning coordination and deconfliction associated with joint targeting Joint targeting coordination responsibilities for the JFC include 1 Establish parameters for successful targeting within the JFC’s OA by promulgating intent objectives guidance sequencing and priorities 2 The JFC assigned as the supported commander will provide early broad and clear targeting guidance to components and supporting commands and DOD agencies consistent with the operation’s end state 3 Maintain currency of mission planning guidance intent and priority intelligence requirements PIRs throughout the operation 4 Direct the formation composition and specific responsibilities of a joint fires element JFE and joint targeting coordination board JTCB if required 5 Approve or delegate approval of the JIPTL developed from component and staff nominations 6 Define criteria for identification of TSTs in the OA These coordination tasks are normally accomplished through the JFC established JTCB or like body b Joint Targeting Coordination Board Targeting coordination tasks are normally accomplished through the JFC-established JTCB or like body The JFC normally appoints the deputy JFC or a component commander to chair the JTCB to provide the appropriate level of experience and focus Component and JFC 39 staff representation on the JTCB should also possess the necessary rank experience and knowledge to speak authoritatively for their respective components and staff elements When a JTCB is not established and the JFC decides not to delegate targeting oversight authority to a deputy or subordinate commander the JFC may perform this task at the joint force headquarters JFHQ with the assistance of the J-3 The JFC ensures his is a joint effort involving applicable subordinate commands other agencies and multinational partners as appropriate Joint targeting is a highly iterative process that needs close coordination during operations If the JFC delegates authority for joint target planning coordination and deconfliction to a subordinate commander that commander should possess or have access to a sufficient C2 infrastructure adequate facilities and joint planning expertise to effectively manage and lead the JFC’s joint targeting operations Should a specific agency be charged with joint functional command responsibilities a joint targeting mechanism might also be needed to facilitate this task at the component level All components are normally involved in targeting and should establish procedures and mechanisms to manage their part in joint targeting 1 The JTCB may be an integrating center for targeting oversight efforts or a JFC-level review mechanism It should be comprised of representatives from the joint force staff all components and if deemed necessary other agencies multinational partners and or subordinate units see Figure III-1 Joint Targeting Coordination Board Organization and Representation 2 Membership of the JTCB should include SMEs in both lethal and nonlethal capabilities The relative importance of lethal versus nonlethal capabilities in targeting may shift as the focus of the operation shifts from direct combat to stability operations The JTCB should be flexible enough to consider both types of capabilities for appropriate targeting This represents the integrated functional staff effort anchored by the joint targeting working group JTWG leading up to the JTCB There is typically a parallel lethal nonlethal effort at the working group level due to time and SME availability In some cases an additional JTWG may be required to process deconflict and prioritize all nominated targets 3 The JFC defines the role of the JTCB The JTCB provides a forum in which all components can articulate strategies and priorities for future operations to ensure they are synchronized and integrated The JTCB normally facilitates and coordinates joint force targeting activities with the components’ schemes of maneuver to ensure the JFC’s priorities are met Normally specific targeting issues are resolved by direct coordination between elements of the joint force below the level of the JTCB but the JTCB or JFC may address specific target issues not previously resolved 4 In multinational operations the JTCB may be subordinate to a multinational targeting coordination board with JFCs or their agents representing the joint force on the multinational board 40 Figure II-1 Joint Targeting Coordination Board Organization and Representation 5 The JTCB is typically responsible for the following a Reviewing operational-level assessment to guide the JFC’s decision making b Maintaining a macro-level view of the OE c Reviewing components’ schemes of maneuver and broad targeting guidance for compliance with the JFC’s intent d Integrating when appropriate component plans according to the JFC’s CONOPS e Developing and refining broad component targeting guidance and priorities f Reviewing and refining ISR collection requirements CRs and joint ISR assessment guidance based on JFC priorities and intent to include refinement of measures of performance MOPs and measures of effectiveness MOEs as appropriate 41 g Reviewing and submitting the coordinated JIPTL for JFC approval or serving as approving authority for JIPTL when designated by the JFC h Ensuring the JTL NSL restricted target list RTL and other relevant target lists are maintained and updated based on JFC guidance i Reviewing validating and approving targets to the JTL and RTL when such authorities are delegated to the JTCB by the JFC 6 Joint Targeting Coordination Board Scope and Focus The JTCB’s focus is to develop broad targeting priorities and other targeting guidance in accordance with the JFC’s objectives as they relate operationally The JTCB must be flexible to address targeting issues but should not become overinvolved in tactical-level decision making In order to function as effectively and efficiently as possible the JTCB requires a focused agenda to guide the daily conduct of business A notional JTCB agenda is outlined in Figure II-2 Notional Joint Targeting Coordination Board Agenda In breaking the meeting into four parts the JTCB may address at least four planning horizons a Assessment The first session is a review of completed operations for example the last 24 hours focusing on the operational level and progress toward the JFC’s objectives It should include an intelligence forecast of anticipated adversary action for future operations planning considerations b Joint Force Commander Intent The second session of the board should consist of broad guidance for future plans and be presented by the JTCB’s chairman c Component Schemes of Maneuver The third session should review components’ detailed operational-level schemes of maneuver for future operations Broad targeting guidance and priorities should be refined as appropriate in this portion of the meeting d Joint Maneuver and Fires The final session of the board should review the next 24 hour’s plan for maneuver fires and targeting More specific targeting issues may be addressed here if not previously resolved as part of deliberate targeting Such issues may include TSTs target restrictions dynamic targeting priorities priorities for certain weapons e g cruise missiles and collection and assessment issues This is the final review of the next day’s plan to ensure it is still valid This is the JTCB’s final chance to recommend modification to targeting priorities before mission planning and execution 7 JFC or designated representative approval for the next day’s JIPTL and related products is usually sought immediately upon adjournment of the JTCB and then promulgated in message format throughout the joint force 42 Figure II-2 Notional Joint Targeting Coordination Board Agenda 8 Normally the JTCB is concerned with future operations not the “current battle ” Operators already have the current day’s targeting plan s in hand and are preparing to execute Changing priorities on the day of execution is possible but normally will be handled through the J-3 or their equivalents at the component level rather than the JTCB Moreover component commanders are normally authorized to make execution day changes compelled by current conditions consistent with the JFC’s guidance and intent c Joint Fires Element The JFC may approve the formation of a JFE within the J3 The JFE is an optional staff element comprised of representatives from the J-3 the components and other elements of the JFC’s staff to include the J-2 targeting staff logistics directorate of a joint staff J-4 J-5 and others as required The JFE is an integrating staff element that synchronizes and coordinates fires planning and coordination on behalf of the JFC and should be physically located near the JTF JOC collocated with the IO cell if possible The JFE assists the J-3 in accomplishing responsibilities and tasks as a staff advisor to the JFC 43 1 JFE key functions and tasks are numerous and include a developing joint targeting guidance objectives and priorities b coordinating deconflicting and validating target nominations at the JFC level and higher c coordinating JTF component input to the JTF JIPTL d prioritizing and forwarding the JTF JIPTL to the JTCB for review and JFC for approval e managing the JFC-approved JIPTL 2 Additionally the JFE may coordinate maintain and disseminate a complete list of fire support coordination measures FSCMs within the joint operations area JOA review recommend intelligence CRs develop the joint fires estimate and COAs monitor JTF TST operations for the JTF J-3 and recommend procedures for engaging TSTs and component critical targets to include making recommendations for deconfliction d Joint Targeting Working Group To assist in the coordination and integration throughout the joint targeting process the JFC may approve the formation of a JTWG The JTWG supports the JTCB by conducting initial collection consolidation and prioritization of targets and synchronization of target planning and coordination on behalf of the JFC The JTWG is an action officer-level venue chaired by the JFE chief J-2 chief of targets or similar representative and meets as required to consolidate and prioritize the draft JIPTL and discuss targeting integration and synchronization issues raised by the JFC staff planning teams and the JFC’s major subordinate commands see Figure II-3 Joint Targeting Working Group Figure II-3 Joint Targeting Working Group 44 1 The purpose of the JTWG includes consolidating deconflicting and prioritizing target nominations synchronizing lethal and nonlethal targeting efforts disseminating revised or new targeting guidance and identifying and integrating lethal and nonlethal opportunities and engagements 2 JTWG responsibilities include reviewing the JFC’s broad targeting guidance and components proposed schemes of maneuver disseminating the JFC’s targeting guidance and priorities reviewing and refining ISR CRs refinement of MOPs and MOEs submitting the draft JIPTL for JTCB review and maintaining and updating the JTL NSL RTL and other relevant targetrelated lists 3 Inputs to the JTWG may include commander’s guidance current targetrelated lists JTL and RTL including TSTs target nomination lists TNLs the NSL and estimated availability of resources capabilities 4 Some of the products the JTWG should produce are recommended JIPTL and apportionment changes to target lists particularly any targets nominated from the RTL and changes to TSTs CRs and recommended priorities 3 Joint Force Staff Responsibilities a Responsibility Sharing The JFC should determine the relative burden sharing for the JTC between the JFC staff and those of the component commanders The JFC develops guidance that directs and focuses planning and targeting to support the CONOPS Supporting and subordinate commanders functional and Service will have their own targeting processes that will complement and support the supported JFC’s targeting process The supported JFC is responsible for coordinating these various targeting processes and delineating the responsibilities of each supporting and subordinate commander to support the JFC’s targeting cycle The supported JFC is responsible for providing opportunities for coordination between these various targeting processes and delineating the responsibilities of each supporting and subordinate commander to support the JFC’s targeting process b Intelligence Directorate The J-2 has the primary responsibility for prioritization of intelligence collection efforts analysis validation and assessment for all joint operations In addition the J-2 provides a major input to the J-3 and J-5 in the form of adversary COA assessments critical to the joint target prioritization process and identification of HVTs and HPTs 1 Some of the joint targeting-related duties that are normally performed by the J-2 are conduct JIPOE conduct target development manage the candidate target list CTL coordinate target vetting with the national intelligence community IC nominate targets for engagement develop and maintain NSL recommend targets for inclusion in the JIPTL manage theater collection priorities and manage PIRs 45 2 Intelligence and Information Requirement Planning PIR a During JIPOE and mission analysis the joint force staff identifies significant information gaps about the adversary and other relevant aspects of the OE After gap analysis the staff formulates intelligence requirements upon which there is a need for the collection of information or the production of intelligence b The J-2 has overall staff responsibility for consolidating intelligence requirement nominations from the staff and for making the overall recommendation to the commander regarding their approval and their relative order of priority c Intelligence requirements designated as PIRs receive increased levels of intelligence support and priority in the allocation of intelligence resources while those not designated as PIR are satisfied as time and resources allow d Ultimately the commander designates PIRs which together with friendly force information requirements FFIRs constitute the commander’s critical information requirements CCIRs 46 Figure II-4 Relationship Between Intelligence Requirements and Information Requirements c Operations Directorate The J-3 assists the commander in the direction and control of operations including the planning monitoring and completion of specific operations In this capacity the directorate is the lead for coordinating integrating and executing operations throughout the OA The directorate also leads planning efforts for current and future operations The flexibility and range of forces require close coordination and integration for effective unity of effort 47 When a JFE is established by the JFC the J-3 will normally organize it and serve as a member 1 The operations directorate's key functions and tasks generally include the following coordinate assessment activities provide current operational assessment develop and maintain ROE publish JFC daily guidance develop proposed force boundaries provide targeting options recommend targets for inclusion in the JIPTL deconflict and validate target nominations manage the JTL and RTL conduct CDE and post-engagement collateral damage assessment CDA conduct munitions effectiveness assessment MEA and initiate and coordinate the STAR process 2 Additionally if directed by the JFC the J-3 may act as lead agent for the JTCB or any similar group established to provide broad targeting oversight d Information Operations Staff and Information Operations Cell Within the joint community the integration of IRCs to achieve the commander’s objectives is managed through an IO staff or IO cell JFCs may establish an IO staff to provide command-level oversight and collaborate with all staff directorates and supporting organizations on all aspects of IO Most combatant commands CCMDs include an IO staff to serve as the focal point for IO Faced with an ongoing or emerging crisis within a geographic combatant commander’s GCC’s area of responsibility AOR a JFC can establish an IO cell to provide additional expertise and coordination across the staff and interagency 1 Information Operations Staff In order to provide planning support the IO staff includes IO planners and a complement of information-related capabilities IRCs specialists to facilitate seamless integration of IRCs to support the JFC’s CONOPS IRC specialists can include but are not limited to personnel from the EW CO MISO civil-military operations CMO military deception MILDEC intelligence and Public Affairs PA communities They provide valuable linkage between the planners within an IO staff and those communities that provide IRCs to facilitate seamless integration with the JFC’s objectives 2 Information Operations Cell The IO cell integrates and synchronizes IRCs to achieve national or CCDR-level objectives Normally the chief of the CCMD’s IO staff will serve as the IO cell chief However at the JTF level someone else may serve as the IO cell chief For additional information on the IO staff and IO cell see JP 3-13 Information Operations e Logistics Directorate The J-4 identifies logistic issues unique or specific to targeting Of particular interest the J-4 compares the operational logistic plans to developing target lists to identify infrastructure and supplies required to support 48 current and future operations and recommendations for the RTL or the desired degree of functionality required to support future operations f Plans Directorate The J-5 performs the long-range or future joint planning responsibilities Planning is conducted by various organizations in conjunction with appropriate staff elements Specific joint targeting-related duties normally performed by the J-5 are as follows 1 Publishes the JFC’s planning guidance and planning directives 2 Identifies possible branches and sequels 3 Develops analyzes compares and recommends COAs for JFC approval 4 Ensures overflight agreements or arrangements are in place with en route nations prior to commencement of operations g Staff Judge Advocate The staff judge advocate SJA advises the JFC and other staff members on applicable international and domestic laws legal custom and practice multilateral and bilateral agreements with host nations LOW issues compliance and interpretation of the ROE and other pertinent issues involved in joint target recommendations and decisions The SJA also reviews target selection and force assignment for legal compliance Additionally the SJA highlights potential associated issues such as harmful environmental impacts or other consequences that should be considered in the targeting process For additional information on joint force staff responsibilities see JP 3-60 Joint Targeting and JP 3-33 Joint Task Force Headquarters For additional information on Joint Intelligence see JP 2-0 Joint Intelligence 4 Battle Rhythm a Battle rhythm is described as the sequencing and execution of actions and events within a JFHQ that are regulated by the flow and sharing of information that support all decision cycles As a practical matter a JFC HQ battle rhythm typically consists of a series of meetings report requirements and other activities to synchronize current and future operations These activities may be daily weekly monthly or quarterly requirements b The JFC must ensure the planning decision and operating cycles of the JFC are nested or linked to that of higher HQ and that subordinate commanders synchronize their battle rhythms with the JFC HQ Some of the pertinent processes and activities that influence the JFC HQ battle rhythm include the targeting cycle ATO cycle fire support planning intelligence collection and battle damage assessment BDA collection Figure II-4 Planning Process and Battle Rhythm illustrates how these processes and activities interact 49 vertically between the levels of command and horizontally during one 96-hour cycle Figure II-5 Planning Process and Battle Rhythm c Critical Functions Typically the JTF HQ battle rhythm is managed by the JTF chief of staff There are several critical functions for a battle rhythm These include but are not limited to the following 1 Providing a routine for staff interaction and coordination within the HQ 2 Providing a routine for commander and staff interaction 3 Synchronizing staff organizations’ activities 4 Facilitating planning by the staff and decision making by the commander d Factors that Shape a Battle Rhythm Many factors influence the establishment of a battle rhythm Subordinate commanders are responsible for linking the planning decision and operating cycles of their command to those of the higher HQ and must synchronize their unit battle rhythm with that of the higher HQ 1 The higher HQ battle rhythm and reporting requirements 2 Battle rhythm must support the commander’s decision cycle 50 3 The planning requirements within the HQ e g future plans future operations and COPS 4 Other factors e g battlefield circulation For additional information on HQ battle rhythm see JP 3-33 Joint Task Force Headquarters 51 SECTION B JOINT TASK FORCE COMPONENTS AND FORCES 1 Common Responsibilities a JFCs have the authority to establish functional component commands to control military operations JFCs may establish a functional component command to integrate planning reduce their span of control and or significantly improve combat efficiency information flow unity of effort weapon systems management component interaction or control over scheme of maneuver b The JFC service and functional component commanders have common fires and targeting responsibilities that include 1 Conduct target development 2 Nominate potential targets for inclusion in the JTL and RTL 3 Nominate targets for inclusion on the JFC’s TST list and maintain their own lists of HPTs 4 Identify and nominate component-critical targets for JFC approval Typically these are component nominations not approved as TSTs by the JFC 5 Provide appropriate representation to the JFE JTWG and JTCB as well as other associated staff organizations when established 6 Consolidate and nominate deconflicted and prioritized targets for inclusion in the JIPTL 7 Provide timely and accurate reporting to the JFE in support of joint operations assessment 8 Provide tactical and operational assessment to the JFE for incorporation into the JFC’s overall assessment efforts 9 Coordinate components’ deliberate and dynamic targeting via established procedures Examples include the liaison elements to the joint air operations center JAOC — battlefield coordination detachment BCD Marine liaison element MARLE naval and amphibious liaison element Air Force liaison element tactical air planners and the special operations liaison element SOLE Direct cross-component coordination provides a means to rapidly coordinate dynamic targeting and avoid delays or possible miscommunication through liaison elements Decentralized execution during dynamic operations e g counterinsurgency and certain stability operations is facilitated by conducting tactical air planning within lower tactical-level units and commands This level of integration will enable more flexible employment of airpower and also improve the fidelity of the JFACC’s overall common operational picture COP 52 c JFC component decisions to modify missions or direct attacks that deviate from the planned activity must be based on the JFC’s guidance These decisions are made with the understanding of the perspective and target priorities of other JFC component targeting effects throughout the campaign For additional information on authorities and common responsibilities see JP 1 Doctrine for the Armed Forces of the United States and JP 3-60 Joint Targeting 2 Functional and Service Component Commanders a Joint Force Land Component Commander The joint force land component commander JFLCC is responsible for making recommendations on the proper employment of assigned attached or made-available-for-tasking land forces and assets planning and coordinating land operations and accomplishing such operational missions as assigned 1 Normally the Service component commander with the preponderance of forces to be tasked and the ability to command and control those forces will be designated as the functional component commander In those instances when the theater-level Service component commander is designated the JFLCC the JFLCC normally delegates as many of the Service component-related duties as practical to a subordinate Army forces ARFOR or Marine Corps forces MARFOR HQ These duties typically include Title 10 United States Code support and administrative control ADCON of Service forces 2 The JFLCC as a Service component commander normally exercises operational control OPCON of same-Service forces through subordinate Service force commanders The JFLCC will normally be delegated tactical control TACON of other-Service forces This arrangement has the potential to over task the JFLCC’s staff during the performance of its dual role It may be advantageous for the JFLCC to delegate as many of the Service component-related duties as practical to a subordinate Service force HQ 3 The JFLCC plans coordinates synchronizes and executes joint fires to create lethal and nonlethal effects to set the conditions for success in their area of operations AO The JFLCC’s primary agency for fires and their effects is either an Army fires cell or a Marines forces fires coordination center FFCC or a fire support coordination center FSCC of J-3 The fires cell or center reviews the JFC’s guidance and intent and makes recommendations for the JFLCC to achieve them The fires cell or center applies this guidance as it shapes the OE for the land component’s current and future fights By employing the fires cell or center the JFLCC focuses on shaping those adversary formations functions facilities and operations that could impact on JFLCC's AO The JFLCC has the following four primary goals associated with these operations 53 a Facilitating both operational and tactical maneuver by suppressing the adversary’s deep-strike systems disrupting the adversary’s operational maneuver and tempo and creating exploitable gaps in adversary positions b Isolating the OA by interdicting adversary military potential before it can be used effectively against friendly forces c Destroying or disrupting critical adversary C2 capabilities d Limiting the destruction of adversary formations functions and facilities to the minimum required to achieve both the JFLCC’s and the JFC’s guidance and intent enabling potential exploitation or use in continuing or future operations 4 The JFLCC’s primary means to attack targets are operational fires and interdiction Potential resources available include maneuver forces i e regiments brigades divisions assigned and supporting air tactical missile systems IO SOF when assigned engineer assets and naval surface fire support NSFS 5 The JFLCC conducts targeting within the joint targeting process A primary consideration in organizing this framework is the JTF’s ability to coordinate deconflict prioritize integrate synchronize and assess joint targeting operations The structure established by the JFLCC must facilitate the joint targeting process throughout the entire spectrum of anticipated targeting timelines from long-term to rapidly-changing time-sensitive situations In addition the joint force must react to rapidly-changing events Likewise the JFLCC should execute all phases of the joint targeting process efficiently and continuously The joint targeting process cuts across traditional functional and organizational boundaries Operations plans and intelligence are the primary staff functions involved with the targeting process but other functional areas e g logistics weather legal and communications SMEs also support the JTC Close coordination cooperation and communication are essential The JFLCC develops guidance that focuses operation planning and targeting to support the JFC’s CONOPS and complies with applicable ROE In the event of unresolved conflict with targeting priorities or ROE changes may be requested from the JFC 6 The JFLCC uses the fires cell to synchronize and coordinate fires These functions and responsibilities include the following a Coordinating and synchronizing all aspects of operational fires with other component commands major subordinate commands and multinational forces 54 b Working in direct coordination with the air support operations center for close air support CAS or through the BCD to the JAOC for air interdiction AI and other air support It also participates in the JTF JTCB and other JTF joint boards c Review and comment recommendation on the JFACC’s air apportionment d Identify assets for JFC allocation e g Army Tactical Missile System ATACMS attack helicopters when available e Identify requirements for fires from other components AI CAS NSFS Influence the JFACC’s air apportionment recommendation f Develop JFLCC targeting guidance and priorities g Integrate and synchronize lethal and nonlethal fires 7 The JFLCC may organize a JFLCC targeting coordination board to function as an integrating center to accomplish targeting oversight functions or as a JFLCC-level review mechanism for fires from lethal and nonlethal weapons In either case it must be a joint activity with appropriate representatives from the other JTF components JFLCC subordinate units and the JFLCC’s staff 8 JFLCC targeting responsibilities include the following a To retain authority and responsibility to direct target priorities for land operations and coordinate subordinate units’ efforts b To provide clear guidance and objectives for JFLCC operational planning and targeting c To update JFLCC mission planning guidance intent and PIRs d To direct the formation composition and specific responsibilities of a JFLCC targeting coordination board to support land operations e To review target selection for unnecessary adverse impacts such as collateral or environmental damage and potential intelligence gains or losses 9 JFLCC subordinate unit targeting responsibilities include the following a To identify requirements and nominate targets to the JFLCC b To provide representation to the JFLCC targeting coordination board 55 c To recommend priorities for BDA CRs to the JFLCC 10 The JFLCC provides a description of the support plan through the liaison elements to the Service and functional components This basic understanding promotes unity of effort through the coordination and deconfliction of targeting efforts between components multinational forces and other agencies 11 The air component coordination element ACCE located with the JFLCC provides valuable assistance and liaison from the JFACC and assists the JFLCC in planning and synchronizing operational fires For additional information on the JFLCC’s roles and responsibilities with fires and targeting see JP 3-31 Command and Control for Joint Land Operations b Joint Force Air Component Commander The JFC normally designates a JFACC based on his vision CONOPS mission tasks assigned to subordinates forces available duration and nature of joint air operations JAO desired and the desired level of C2 for JAO The JFC will normally assign JFACC responsibilities to the component commander having the preponderance of forces to be tasked and the ability to effectively plan task and control JAO 1 The JFACC is given the authority necessary to accomplish missions and assigned tasks in support of the JFC’s intent and CONOPS The JFACC will normally have OPCON over forces assigned and exercise TACON over forces made available for tasking The JFC also may establish supporting and supported relationships between the JFACC and other components to facilitate operations 2 The JFACC normally assumes the area air defense commander AADC and airspace control authority ACA responsibilities because AD and airspace control are an integral part of JAO As the designated commander for JAO the responsibility for planning coordinating and developing airspace control procedures and operating an airspace control system ACS also rests with the JFACC When the situation dictates the JFC may designate a separate AADC or ACA In those joint operations where separate commanders are required and designated close coordination is essential for unity of effort prevention of fratricide and deconfliction of JAO 3 The responsibilities of the JFACC normally include the following a Planning coordinating tasking executing monitoring and assessing JAO and the allocation and tasking of joint air operation forces in accordance with the JFC’s guidance objectives and end state b Develop a JAOP to best support the JFC’s CONOPS or OPLAN 56 c Recommend air apportionment priorities of for the joint air effort to the JFC after consulting with other component commanders This recommendation can be by either percentage or priority and should be devoted to the various air operations for a given period of time d Allocate and task air capabilities forces made available based on the JFC’s air apportionment decision e Develop daily anticipatory guidance for construction of the air operations directive AOD f Assess the results of JAO and forward assessments to the JFC to support the overall assessment effort g Perform the duties of the space coordinating authority SCA if designated The SCA is responsible for coordinating and integrating space capabilities in the OA and has primary responsibility for joint space operations planning to include ascertaining space requirements within the joint force h Provide oversight and guidance during execution of JAO to include making timely adjustments to taskings of available joint air capabilities forces The JFACC will coordinate with the JFC and affected component commanders as appropriate when the situation requires changes to planned JAO i Perform the duties of the personnel recovery PR coordinator as required j Perform the duties of the ACA unless a separate ACA is designated k Perform the duties of the AADC unless a separate AADC is designated 4 In concert with the above responsibilities the JFACC typically accomplishes various mission areas that include counterair strategic air attack airborne ISR AI intratheater and intertheater air mobility and CAS 5 The JFACC will normally operate from a JAOC The JAOC and the JFACC’s staff should be manned with SMEs who reflect the capabilities forces available to the JFACC for tasking and include appropriate component representation JFACC staff billets requiring specific expertise or individuals should be identified staffed accordingly trained and employed during peacetime exercises to ensure their preparedness for military operations The JFACC’s staff is organized to support the planning coordinating and execution of aviation fires and typically includes the following see Figure II-5 Typical Joint Force Air Component Commander Staff and Joint Air Operations Center Organization 57 Figure II-6 Typical Joint Force Air Component Commander Staff and Joint Air Operations a Strategy Division The strategy division SD concentrates on long-range and near-term planning of JAO to achieve JFC objectives by developing refining disseminating and assessing the JFACC’s strategy In addition the SD does near-term planning for space cyberspace and IO in 58 coordination with JAO Strategy activities are primarily reflected in the JAOP AOD and the operational assessment report The SD is divided into four teams strategy plans strategy guidance IO and operational assessment Although the IO team is organizationally aligned with the SD it coordinates IO efforts across all the divisions within the JAOC b Combat Plans Division The combat plans division CPD is responsible for near-term air operations planning within 48 hours prior to ATO execution The CPD is divided into four teams targeting effects team TET master air attack plan MAAP ATO production and C2 plans The TET develops the JFACC’s TNL and produces a draft JIPTL for JFC approval The primary daily products of the CPD processes are the ATO and airspace control order ACO The CPD develops the MAAP assembles the special instructions SPINS and ISR synchronization matrix The MAAP team needs the current AOD air battle plan ABP shell and JIPTL loaded to build missions in the proper theater battle management core system TBMCS format The C2 plans team produces the daily ACO tactical operations data and operational task link message The ATO production team develops the ABP databases and assembles publishes and disseminates the ATO ACO and SPINS Additionally various specialty support personnel are embedded in the CPD c Combat Operations Division The combat operations division COD is responsible for the execution of the current ATO usually the 24 hours encompassing the effective period of the ATO The COD is divided into four teams offensive operations defensive operations interface control and the senior intelligence duty officer SIDO team d Intelligence Surveillance and Reconnaissance Division For operations in theaters outside the continental US the intelligence surveillance and reconnaissance division ISRD is responsible for providing the JFACC and JAOC with awareness of adversary activity in the OA assisting with integrating planning and managing airborne ISR operations developing and maintaining targeting information about the adversary and assisting with execution of ISR operations The ISRD is divided into four teams analysis correlation and fusion targets and tactical assessment ISR operations and processing exploitation and dissemination team ISR personnel assigned in the SD assist in the development of overall JFACC strategy JAOP and operational assessment ISR personnel assigned in the CPD provide tailored ISR operations planning threat analysis and targeting expertise necessary to develop detailed execution plans for JAO ISR personnel assigned to the COD are part of the SIDO team and provide current situational awareness SA targeting and ISR operations management for execution of the ATO e Air Mobility Division The air mobility division AMD plans coordinates tasks and executes the air mobility mission in support of the 59 joint air planning and execution process The AMD consists of four teams airlift control team ALCT air refueling control team ARCT air mobility control team AMCT and aeromedical evacuation control team AECT The ALCT plans schedules and tasks the theater airlift portion of the ATO The ARCT plans schedules tasks and assists in execution of air refueling missions The AMCT manages the execution of the air mobility missions in the ATO and provides support for the overall air mobility effort The AECT plans schedules and monitors execution of aeromedical evacuation AE missions and AE assets to support patient movements For additional information on the JFACC’s roles and responsibilities with fires and targeting see JP 3-30 Command and Control for Joint Air Operations c Joint Force Maritime Component Commander When a JTF is established that includes naval forces the JFC designates the Service component commander best suited to accomplish the mission as the joint force maritime component commander JFMCC Organizing the maritime force and staffs should take into account the nature of the global maritime environment and technological advances in communications ISR systems and improved weapons capabilities associated with maritime forces Equally important in determining how a JFC organizes joint forces are an adversary’s nature capabilities and the OE e g geography accessibility climate and infrastructure Though most times this will be the Navy component commander NCC or numbered fleet commander there may be occasions when maritime operations are focused on the littorals and the Marine Corps component has the preponderance of forces and C2 capabilities In such instances the JFC may elect to designate the Marine Corps component commander as the JFMCC 1 The JFMCC is responsible for the planning and employment of operational fires within the assigned AO both in terms of developing and integrating multidimensional attacks on the adversary’s COGs and in terms of shaping the JFMCC’s AO JFMCC targeting tasks include setting maritime asset allocations and maneuver priorities identifying HVTs and HPTs for acquisition and attack and employing forces JFMCC intelligence operations and planning personnel translate operational objectives and tasking into orders directing tactical actions by subordinate maritime commands 2 The JFMCC organization is scalable and will be tailored in size and specific capability depending on mission requirements Likewise the maritime operations center’s MOC’s targeting and fires element functions and organization supporting the JFMCC will be designed and scaled according to mission requirements e g a large fires element may be required for missions against OPFORs whereas a humanitarian crisis may require little or no targeting capability The fires element performs three distinct but related targeting functions operational planning deliberate targeting and dynamic targeting Fires and targeting personnel who contribute to the various MOC 60 fires functions are organized in the fires element for standardization and coordination The fires element is a matrixed organization and is responsible for the coordination of all fires functions Fires personnel may be assigned from another center e g intelligence targeting personnel for deliberate targeting or may be assigned to perform duties under the direction of other MOCs and cells 3 While it is acknowledged that targeting requirements will to some extent be JOA-specific many of the core targeting processes will remain the same or be similar For joint forces to achieve unity of effort there will always be a need to synchronize JFMCC targeting efforts with those of other components and the JFC The following operational assumptions frame the discussions for the remainder of JFMCC fires and targeting a The JFMCC targeting capability will complement and integrate into the larger joint targeting process as defined by JFC guidance While it is conceivable the JFMCC could be the JFC’s executive agent responsible for all JFC targeting coordination similar to the functions typically done on a JFACC staff or MOC a more likely scenario is one where the JFMCC supports an established joint targeting process b The JFMCC will retain OPCON over organic maritime targeting and fires assets in direct support DS strike missions for JFMCC-specified and implied tasks These assets include organic ISR capabilities that provide actionable targeting information to organic and joint weapon systems including carrier-based Navy tactical aviation land-based Marine airground task force MAGTF aviation combat element ACE tactical aviation through the MAGTF commander surface- and subsurfacelaunched cruise missiles commonly known as Tomahawk land-attack missiles TLAMs naval surface fires and maritime IO capabilities c The JFMCC MOC will also actively participate in deliberate targeting operations via nomination of potential targets to the JFC targeting authority e g JFC JTCB The JFMCC will actively participate in dynamic targeting to address emerging targets in the OE This may include targets within the JFMCC’s AO or targets that impact the JFMCC’s ability to achieve objectives as defined by the JFC Note MOC operations and intelligence targeting personnel will interface directly with the JFC targeting organizations other components federated partners and subordinate commands to ensure unity of effort toward maritime objectives The maritime targeting process is synchronized with joint targeting by aligning the MOC battle rhythm with the timelines and products of the JFC and the other component commanders d The JFMCC MOC targeting organization will be federated and will utilize operations and intelligence capabilities that are part of subordinate maritime commands This may include the functions typically found in 61 carrier and expeditionary strike groups and maritime patrol and reconnaissance wings The composite warfare commander CWC structure may be used for tactical coordination and synchronization of targeting functions 4 Fires targeting resources and capabilities normally organic to a JFMCC include the following a Interdiction CAS suppression of enemy air defenses SEAD counterair offensive and defensive and NSFS direct and general IRCs are also employed to affect adversary information and information systems The JFMCC’s interests are those adversary forces functions facilities and operations that impact plans and operations b Concentrated fires even from dispersed forces are possible because of the maneuverability of forces and the extended range of their fires The JFMCC’s resources for fires encompass forces assigned by the JFC and may include sea- or shore-based aircraft including fixed- or rotary-wing assets as well as surface- and subsurface-launched TLAMs and torpedoes surface gunnery including NSFS surface- subsurface- and air-launched mines air land maritime space cyberspace SOF capabilities and unmanned vehicles 5 The maritime challenge is complex due to the multidimensional nature of the maritime OE and the various mission areas for which the JFMCC is responsible These include strike warfare IO antisubmarine warfare surface warfare SUW AD mine warfare and amphibious warfare Because maritime assets routinely and simultaneously conduct operations in two or more of these mission areas there is typically an overlap in the mission objectives for maritime tactical commanders This overlap often results in competing warfare commander requirements for force allocation or asset positioning and requires the commander to balance synchronize and adjudicate requests to produce the best overall asset allocation or positioning maneuver solution Another complication is that tasking may change significantly and rapidly as events in this complex environment unfold The JFMCC manages these shifts in tasking and delineates how to provide this varied simultaneous support to sometimes geographically separated forces The JFMCC’s management mechanism is normally via OPORDs FRAGORDs operation general matter and operation tasks These directives should incorporate the JFC’s intent support-approved subordinate CONOPS consider requests prompted by the dynamics of the OE work within the required operations tempo and frame the daily operational planning conducted by the JFMCC’s staff and assigned forces 6 JFMCC targeting functions and tasks will be conducted by directorates of the MOC and the maritime intelligence operations center MIOC Additionally the JFMCC MOC will incorporate tactical targeting capabilities via the adoption of a federated targeting operational architecture The MIOC and IO cell targeting personnel will maintain the connectivity to the 62 JFC and external centers for federated targeting support to the MOC These federated capabilities will include intelligence and operations functions that are part of the existing CWC task force structure a The future plans cell FPC is focused on long-range planning and participates in the JFMCC’s long-range planning processes This may include participation and input to JFMCC’s contribution to the JFC’s OPLANs and OPORDs The FPC manages the JOPP and complementary naval planning process The focus of the command’s future planning is development of plans orders and policy directives From a targeting perspective the maritime planning group MPG which is the avenue the plans’ directorate planning efforts are synchronized across the staff during the staff estimate process coordinates development of the JFMCC objectives and end state This effort helps frame targeting Close coordination between the FPC and the JFC future planning cell as well as with counterparts on other component staffs is critical to developing targeting strategies and apportionment decisions that are aligned with JFC objectives and guidance b The future operations center FOC conducts operational-level planning for potential midterm operations branch plans for the JFMCC In conjunction with the MPG and COPS cell the FOC works to conduct rapid planning in support of the branch plan and has the responsibility to recommend changing force apportionment and resourcing in response to a branch plan The FOC proposes changes to prioritization of operational objectives to guide targeting objectives and priorities and coordinates with the SJA to ensure targeting is in accordance with the law of armed conflict and the MIOC to ensure the intelligence supports the fulfillment of the CCIRs The FOC is responsible for developing targeting engagement options target-weapon pairing recommendations force allocation maritime master attack plan and tasking orders c The COPS cell primarily focuses on monitoring and assessing ongoing operations and the execution of the commander’s intentions The COPS cell is responsible for overseeing and providing quality control during an operation for the implementation and coordination of the commander’s orders The COPS cell is the central point for all cross-functional teams to forward key events and to receive information related to the execution of operations The COPS cell is responsible for monitoring the current situation and reflecting any changes to the execution of assigned orders by all subordinate forces The COPS cell in coordination with other cells must be capable of short-term operation planning usually through a crisis action team The COPS cell must also monitor the CCIRs The COPS cell is focused on short-term operations and execution of the JFMCC’s daily intentions The COPS cell monitors the current situation and receives the results of ongoing operations The battle watch captain BWC and staff provide 24 7 SA during execution and dynamically 63 responds to changes in the OE to ensure the JFMCC’s objectives are achieved 1 Within the COPS cell organization with coordination with the fires element targeting team SMEs monitor ongoing operations for all fires efforts This includes operations involving IO TLAM tactical air maritime patrol aircraft MPA and naval surface fires maritime dynamic targeting personnel fill 24 7 watch positions on the COPS watch floor and report to the BWC for the execution of dynamic targeting and prosecution of dynamic targets and TSTs 2 The COPS cell monitors or tracks a variety of functions to include orders in execution i e OPORDs FRAGORDs ATOs and other current directives status of the commander’s critical information links in coordination with the joint communication control center and commander’s directions to subordinate commands i e task forces groups units and elements collects and analyzes COPS MOPs synthesize task assessments and collects and passes MOE indicator data for effects assessment 3 The COPS cell maintains close liaison with the operations staffs of the JFC and other components to ensure operations are synchronized and where necessary deconflicted These tasks are critical to maintaining unity of effort and to reduce the risk of fratricide 7 While the JFMCC AO will be defined by the JFC JFMCC targets can and should include all enemy capability that have the potential to interfere with the accomplishment of JFC assigned tasks to the JFMCC These may include inland targets targets in the littorals and targets on under or over the sea Potential examples include an enemy naval operations center located deep inland a coastal defense cruise missile site mine storage facility ships and submarines either pier-side or at sea or maritime aviation units 8 While the MIOC is the organization that fulfills the commander’s numbered fleet theater responsibilities an intelligence support element ISE can be established to support the commander’s responsibilities if designated as a JFMCC In this case the MIOC continues to support the commander’s statutory numbered fleet responsibilities while the ISE serves the commander in his JFMCC role The ISE gives the commander liaison with the JFC’s JIOC or joint intelligence support element JISE and a focus on the JOA and campaign requirements To enable successful mission planning and execution the ISE must coordinate with the JIOC JISE national agencies and other components This federated and collaborative intelligence support effort is described in Chapter III “Joint Fires Planning and Targeting ” and Appendix A “Intelligence Organizations Supporting Targeting ” To enable this effort the JFMCC ISE will be required to be compatible and align with JFC C2 and intelligence systems and processes These information exchange 64 requirements include the systems and processes designed to develop the ATO JIPTL targeting imagery and other targeting intelligence Where systems are not interoperable a suitable work-around solution is needed For additional information on the JFMCC’s roles and responsibilities with fires and targeting see JP 3-32 Command and Control for Joint Maritime Operations d Joint Force Special Operations Component Commander The joint force special operations component commander JFSOCC is the commander within a unified command subordinate unified command or JTF responsible to the establishing commander The JFSOCC is given the authority necessary to accomplish missions and tasks assigned by the establishing commander i e a GCC or commander joint task force The commander theater special operations command or a commander joint special operations task force CDRJSOTF will normally be the individual functioning as the JFSOCC When acting as a JFSOCC they retain their authority and responsibilities as JFCs 1 Responsibilities of the JFSOCC include the following a Make recommendations on the proper employment of SOF and its assets b Plan and coordinate special operations SO c Synchronize the conduct of SO as assigned with the other component commanders 2 Joint Special Operations Task Force A joint special operations task force JSOTF is a JTF composed of SO units from more than one Service formed to carry out a specific SO or prosecute SO in support of a theater campaign or other operations A JSOTF may have conventional forces CF tasked to support the conduct of specific missions 3 Deconfliction coordination and transfer of forces are always critical concerns for SO commanders regardless of organizational status Deconfliction and coordination activities routinely include target deconfliction communications frequency allocation surface and airspace deconfliction fire support coordination and coordination for logistics support 4 SOF can facilitate JFC joint fires and targeting with the following capabilities a Special reconnaissance b Positive identification PID of specific targets c Target marking and terminal guidance 65 d BDA e Recommendations to NSL and RTL f AC-130 gunship support or other direct action support g Information on other coalition or indigenous force status and positions h Combat meteorological and oceanographic support i Nonlethal fires j Information from SOF ISR and human assets k Experience with indigenous or surrogate forces 5 Joint fires assist SOF and attached forces to move maneuver and control territory populations and key waters Joint fire support is the synergistic product of three subsystems target acquisition C2 and attack resources The JSOTF HQ is most concerned with the C2 subsystem The JSOTF must consider incorporating the complementary capabilities of CF under control of the JFC 6 SOF must be compatible with CF that either host or support their activities This is especially true during time-critical contingency planning operations For example if SOF is operating from naval surface vessels during forcedentry operations they must be prepared to function with the host vessel Weapons and communications must be deconflicted with ship systems and SOF helicopters must be compatible with shipboard fuel systems Likewise conventional force commanders must be sensitive to their own operations which may require modification so as not to inhibit the SOF operation 7 CF integrated with SOF create unique capabilities for the JFC to achieve objectives that might otherwise be unattainable Flexible C2 specific mission generation processes clear mission approval levels and tactical interdependence can improve SOF and CF integration 8 SOF target acquisition C2 and attack resources must be properly planned coordinated and executed to prevent fratricide and duplication while supporting operational momentum maintaining the initiative and conducting maneuver Both CF and SOF must be integrated fully into this system In some cases a JFE is embedded within a JSOTF to coordinate synchronize and deconflict fires within the joint special operations area JSOA The JSOTF J-3 performs this function without a JFE and coordinates and deconflicts air operations in its assigned airspace Airspace coordination and deconfliction may require a joint air coordination element to assist the JSOTF J-3 in the C2 of these related functions 66 For additional information on the JFSOCC’s roles and responsibilities with fires and targeting see JP 3-05 Special Operations and JP 3-05 1 Joint Special Operations Task Force Operations e Army Forces 1 Battlefield Coordination Detachment A BCD is established to act as an Army liaison provided by the Army component or force commander to the designated air operations center AOC and or to the component designated by the JFC to assist in planning coordinating and integrating JAO normally the JFACC The BCD is collocated with the JFACC’s staff in the JAOC The BCD processes land force requests for air support monitors and interprets the land battle situation in the JAOC and provides necessary interface for the exchange of current operational and intelligence data The BCD expedites the exchange of information through face-to-face coordination with elements in the JAOC and coordinates AD and airspace control matters The BCD is organized into sections incorporated throughout the JAOC e g plans intelligence operations airspace management and airlift 2 Allocation of Battlefield Coordination Detachments The BCD basis of allocation is one per GCC based on requirements approved by Department of the Army The BCD may support the Army Service component commander ASCC or be tailored to support a corps or division commander’s operations Normally the BCD is assigned to the ASCC and further attached to the senior operational ARFOR HQ a The Army provides a BCD as the interface for selected battlefield functions between the ARFOR JFLCC and the Air Force Forces AFFOR JFACC The BCD supports offensive counterair OCA operations by advising the JFACC JAOC on the capabilities and effective employment of ARFOR systems The BCD is responsible to the JFLCC and coordinates with and receives objectives guidance and priorities through the JFLCC’s Army component operations staff officer G-3 Guidance and priorities must be sufficiently clear to permit the BCD to adjudicate ARFOR needs for air support The BCD assists in the synchronization of JAO with JFLCC maneuver and fires and the exchange of operational and intelligence data b The BCD singly represents the ARFOR interests of the JFLCC Other Services or functional components normally provide their own liaisons to the JFACC and to the JFLCC as appropriate For example all of the following might provide liaison SOLE Marine liaison officer or naval and amphibious liaison element c The BCD monitors and interprets the land battle for the JFACC staff It passes ARFOR operational data and operational support requirements 67 from the commander Army forces to the JFACC and participating multinational forces to include CAS AI manned and unmanned reconnaissance and surveillance and joint suppression of enemy air defenses SEAD For additional information on ARFORs see JP 3-31 Command and Control for Joint Land Operations Air Land Sea Application MTTP for Theater Air Ground System and Army Tactics Techniques and Procedures 3-09 13 The Battlefield Coordination Detachment f Marine Corps Component Commander and Forces 1 In accordance with joint doctrine a JFC should allow Service tactical and operational assets to function generally as they were designed trained and equipped Regardless of the level of the joint force or how a JFC organizes his force if Marine Forces MARFOR are assigned there is always a Marine Corps Service component There are two levels of Marine Corps components — a Marine Corps component under a unified command and a Marine Corps component under a subordinate unified command or a JTF The Marine Corps component commander advises functional component commanders on the most effective use of MARFOR or capabilities made available The MARFOR or capabilities made available by the JFC respond to the functional component commander for operational matters based on the existing command relationship Joint doctrine provides specific guidance regarding how this is accomplished with respect to Marine Corps tactical aviation All MARFOR receive administrative and logistic support from the Marine Corps component commander 2 Marine Air-Ground Task Force a MARFOR consists of combat combat support and combat service support units that are normally task-organized as the Marine Air-Ground Task Force MAGTF The MAGTF is the Marine Corps’ principal organization for all missions across the range of military operations All MAGTFs consist of four core elements a command element CE a ground combat element GCE an ACE and a logistics combat element LCE The MAGTF principally employs fire support provided by the GCE and the ACE but may also receive external fire support from other joint combined and coalition forces The MAGTF and GCE are combined arms teams by the nature of their organization The GCE’s ability to create decisive effects is most efficient and effective when it synchronizes combined arms fires It is the only MAGTF element that can seize and occupy territory b The MAGTF is a scalable construct with three standard sized task forces The largest is the Marine Expeditionary Force MEF the GCE of which is a division The Marine Expeditionary Brigade MEB is the mid-sized 68 MAGTF which includes a regiment as the GCE Finally the Marine Expeditionary Unit MEU is the smallest standard MAGTF which includes a battalion landing team BLT as the GCE and is generally embarked on naval shipping for deployment The MAGTF can also be specially task-organized for a specific mission creating a Special Purpose MAGTF SPGMATF 3 Marine Expeditionary Force The Marine expeditionary force MEF CE organizes a FFCC which is responsible for overall fires coordination At each level below the MEF CE division regiment and battalion a FSCC is established as an advisory and coordination agency within the GCE The FSCC is a single location that centralizes communications facilities and personnel for the coordination of all forms of fire support for the GCE The United States Marine Corps USMC employs a designated ground combat officer as a fire support coordinator FSC who acts as the direct representative of the commander landing force CLF for the planning and coordinating of all available fire support A USMC FSCC normally includes an air section naval gunfire liaison section and artillery section to plan and execute fires in support of the scheme of maneuver 4 The GCE FSCC interacts with the CE through the MAGTF FFCC The FFCC coordinates those matters that cannot be coordinated by the FSCC and those matters that affect the MAGTF as a whole The MAGTF landing force LF FFCC coordinates fires with higher adjacent and external commands The FFCC maintains close coordination with the GCE for integrating fire support plans of the deep and close battle For additional information on Marine Corps component commander and forces see Marine Corps Doctrinal Publication 1-0 Marine Corps Operations and Marine Corps Warfighting Publication MCWP 3-40 8 Marine Corps Componency g Naval Forces 1 Officer in Tactical Command The officer in tactical command OTC is the senior officer present eligible to assume command or the officer to whom the senior officer has delegated tactical command The OTC is responsible for the tactical force deployment and for successfully accomplishing missions assigned to the naval force The OTC of any naval task organization may create a composite warfare organization whenever and to whatever extent required depending upon the composition and mission s of the force the environment in which the force is operating and the nature and severity of the threat The composite warfare organization enables offensive and defensive combat operations against air surface undersea electronic and land-based threats When multiple warfare functions e g anti-submarine warfare SUW or IO are assigned the OTC also designates a composite warfare commander CWC to coordinate overall operations The OTC may also retain CWC command functions However the OTC and CWC are always separate and 69 distinct even when the same commander fills both roles In the case of a widely disbursed force the OTC may designate sector CWCs The OTC and or CWC may choose to activate all warfare commanders and coordinators or activate only a few of them Flexibility of implementation reinforced by clear guidance to subordinates and use of command by negation is key to decentralized control of the tactical force The CWC may in turn delegate some or all warfare functions to subordinate warfare commanders 2 The Navy employs the CWC concept as the doctrinal cornerstone of its task force operational and tactical C2 system Note While acknowledged in joint doctrine the OTC and CWC are Navy and NATO unique constructs Joint community understanding of these C2 constructs is important when coordinating or working with maritime forces The OTC controls CWC and subordinate warfare commander’s actions through “command by negation ” The CWC concept enables the OTC of a naval force to wage combat operations aggressively against air surface and subsurface threats simultaneously while supporting the JFC CONOPS The concept is designed to prevent an enemy from saturating a single command node with a large number of rapidly closing air surface and submarine threats by assigning warfare areas to separate commanders Principal warfare commanders are responsible to the CWC for the conduct of the tactical battle The five principal warfare commanders are the AD commander surface warfare commander SUWC antisubmarine warfare commander ASWC strike warfare commander STWC and information operations warfare commander a Dependent on the situation the ASWC and SUWC may can be combined and put under a sea combat commander Warfare commanders normally operate from the combat direction centers of the ships they actually command or in spaces specially equipped to accomplish their respective missions All warfare commanders collect evaluate and disseminate tactical information as well as plan and coordinate with other warfare commanders Also when authorized by the CWC warfare commanders may operate autonomously in TACON of assigned resources b The CWC may assign functional warfare commanders subordinate to the CWC to perform duties that are generally more limited in scope and duration than those acted upon by principal warfare commanders Functional warfare commanders in certain situations are delegated authority to conduct fires to respond to threats with assigned assets c Coordinators assist the CWC and the subordinate warfare commanders They differ from warfare commanders in that coordinators execute policy but do not control forces and do not initiate autonomous actions Typical coordinators include the following 70 1 The air resource element coordinator is responsible for managing and coordinating the allocation and distribution of carrier aircraft 2 Naval force ACA is responsible for coordinating and managing use of airspace by the naval force 3 The helicopter element coordinator is responsible for managing naval helicopter assets 4 Tomahawk land-attack missile strike coordinator TSC is responsible for all TLAM strike planning coordination and reporting 5 TLAM launch area coordinator is the TSC’s principal deputy in the execution of TLAM strike operations For additional information on Naval forces see Naval Warfare Publication 3-56 Composite Warfare Doctrine and NTTP 3-32 1 Maritime Operations Center h Air Force Forces 1 Theater Air Control System The theater air control system TACS is the commander Air Force forces COMAFFOR mechanism for commanding and controlling component air and space power It consists of airborne and ground elements to conduct tailored C2 of air and space operations throughout the range of military operations including AD airspace control and coordination of space mission support not resident within theater The structure of the TACS should reflect sensor coverage component liaison elements and the communications systems required to provide adequate support As an organic Air Force system the TACS remains under OPCON of the COMAFFOR The TACS is the backbone of the AFFOR’s contribution to the theater air-ground system TAGS and consists of units specifically trained and equipped to support the C2 process Note For further discussion on COMAFFOR’s responsibilities see Appendix B “Joint and Service Command and Control Systems ” 2 Air Support Operations Center The air support operations center ASOC is the principal air control agency of the TAGS responsible for the direction and control of air operations supporting the GCE It is directly subordinate to the AOC and is responsible for the integration of air operations within its assigned corps sector including CAS AI intratheater airlift ISR SEAD and PR It normally collocates with the Army tactical HQ senior FSCC within the ground combat element The ASOC can be configured for rapid deployment The ASOC director normally the corps air liaison officer ALO exercises OPCON of all subordinate tactical air control parties TACPs The ASOC also provides some logistic and administrative support to the TACPs under its OPCON 71 3 Theater Air Control Party The TACP is the principal Air Force liaison element collocated with Army maneuver units from battalion through corps The primary TACP mission is to advise ground commanders on the capabilities and limitations of airpower and assist integrating airpower into the Army’s scheme of maneuver The TACP provides the primary terminal attack control of CAS in support of ground forces TACPs deconflict the aircraft with Army fire support to prevent fratricide TACPs are directly subordinate to the ASOC TACPs may employ joint tactical air controllers at company team level For additional information on AFFOR see Lemay Center for Doctrine Air Force Doctrine Annex AFDA 3-30 Command and Control AFDA 3-01 Counterair Operations and AFDA 3-52 Airspace Control 72 CHAPTER III JOINT FIRES PLANNING AND TARGETING SECTION A JOINT FIRES PLANNING 1 General a Joint Fire Support Definition Joint fire support is defined as joint fires that assist air land maritime and SOF to move maneuver and control territory populations airspace and key waters Synchronization of joint fire support with the supported force is essential Prerequisites for effective joint fire support are interoperable systems broad understanding of the differing strengths and limitations of each Service’s capabilities and how they are applied and clear agreement about how those capabilities will be integrated in any given operational setting JP 3-09 Joint Fire Support provides guidance for planning coordinating and executing joint fire support b Planning Joint fire support planning is an integral part of the overall planning process Joint fire support planners and or coordinators actively participate with other members of the staff to develop estimates give the commander recommendations develop the joint fire support portion of the CONOPS and supervise the execution of the commander’s decision The effectiveness of their planning and coordination is predicated on the commander providing clear and precise guidance Joint fire support planning and coordination ensures all available joint fire support is synchronized in accordance with the JFC’s plan The key to effective integration of joint fire support is the thorough and continuous inclusion of all component fire support elements FSEs in the joint planning process aggressive coordination efforts and a vigorous execution of the plan Commanders should not rely solely on their joint fire support agencies to plan and coordinate joint fire support A continuous dialogue between the commander subordinate commanders and joint fire support planners must occur c Purpose The purpose of joint fire support planning is to optimize its employment by integrating and synchronizing joint fire support with the commander’s maneuver plan During the planning phase commanders develop a CONOPS including the concept for fires Commanders determine how to shape the OE with fires to assist maneuver and how to use maneuver to exploit the use of joint fire support Objectives are restated in terms of what effects are required from joint fire support Decisive operations freedom of action massing the effects of firepower and depth and simultaneity are typical considerations Joint fire support planners are responsible for advising commanders on the best use of available joint fires support developing joint fire support plans issuing necessary orders in the name of appropriate commanders and implementing approved joint fire support plans for the component or joint force Joint fire support requirements are considered throughout the JFC’s planning and decision-making processes and during all phases of an operation 73 d All components can plan for and coordinate joint fire support Just as the JFC’s intent and CONOPS should take into account the integration and synchronization of tactical operational and strategic operations the CONOPS for component commanders should integrate and synchronize joint fire support at the tactical as well as the operational level Joint fire support planning and coordination must be continuous and its execution decentralized e Basic Joint Fire Support Tasks Effectiveness of the joint fire support effort is measured by creating desired effects on the enemy setting conditions for decisive operations and supporting joint force operations Effective joint fire support depends on planning for the successful performance of the following four basic fire support tasks 1 Support Forces in Contact The commander must provide responsive joint fire support that protects and ensures freedom of maneuver to forces in contact with the enemy throughout the OA 2 Support the Concept of Operations The CONOPS clearly and concisely expresses what the JFC intends to accomplish and how it will be done using available resources The concept of fires must describe how joint fires will be synchronized and integrated to support the JFC’s objectives as articulated in the CONOPS 3 Synchronize Joint Fire Support Joint fire support is synchronized through fire support coordination beginning with the commander’s estimate and CONOPS Joint fire support must be planned both continuously and concurrently with the development of the scheme of maneuver Further operations providing joint fire support must be synchronized with other joint force operations e g air operations CO ISR functions SO and IO in order to optimize the application of limited resources achieve synergy and avoid fratricide 4 Sustain Joint Fire Support Operations Joint fire support planners must formulate joint fire support plans to reflect logistic limitations and to exploit logistic capabilities Ammunition fuel food water maintenance transportation and medical support are all critical to sustaining joint fire support operations f Importance of the Electromagnetic Spectrum All modern forces and the operations they conduct depend on the electromagnetic spectrum EMS The EMS is a characteristically-discernable physics-based continuum within which attack maneuver deception and concealment can be conducted by military forces To achieve effective joint fire support commanders must understand and manage the increasingly dense and complex demands placed on the EMS 74 For additional information on fire support planning and operational considerations see JP 3-09 Joint Fire Support 2 Coordination and Synchronization a Force Employment During military operations the JFC employs conventional and SOF capabilities throughout the breadth and depth of the JOA in linear and nonlinear orientations Direct and indirect attacks on enemy COGs through critical vulnerabilities should be designed to achieve the required military operational objectives per the CONOPS while limiting the potential undesired effects on operations in follow-on phases Integrating and synchronizing interdiction and maneuver assists commanders in maximizing leverage at the operational level 1 Within their AO land and maritime component commanders MCCs are designated the supported commander for the integration and synchronization of maneuver fires and interdiction To facilitate this integration and synchronization such commanders have the authority to designate target priority effects and timing of fires within their AO 2 Synchronization of efforts within the land or maritime AO with theater and or JOA-wide operations is of particular importance To facilitate synchronization the JFC establishes priorities that will be executed throughout the theater and or JOA including within the land and maritime force commander’s AO The JFACC is normally the supported commander for the JFC’s overall AI effort while land and MCCs are supported commanders for interdiction in their AO b Joint Fire Support Joint fire support includes joint fires that support joint forces to achieve military objectives Joint fire support may include but is not limited to the lethal effects of fixed- and rotary-wing aircraft NSFS artillery mortars rockets and missiles as well as nonlethal effects of some IO CO EA space control operations and other nonlethal capabilities Integration and synchronization of joint fires and joint fire support with the fire and maneuver of the supported force is essential 1 Joint fire support coordination includes efforts to deconflict attacks avoid fratricide reduce duplication of effort and assist in shaping the OE Coordination procedures must be flexible and responsive to the ever-changing dynamics of warfighting Streamlined arrangements for approval or concurrence should be established Coordination arrangements are reflected in the CONOPS and support the sequencing and timing of actions to achieve objectives Coordination is enhanced when joint fire support personnel clearly understand the commander’s intent A very important part of the planning process is the identification of potential fratricide situations risk mitigation measures and coordination measures to positively manage and control the attack of targets 75 2 The JFC and component commander staffs synchronize joint fire support operations to optimize effects in time space and purpose to produce maximum relative combat power at a decisive place and time To facilitate synchronization efforts commanders and staffs must have a thorough knowledge of joint and Service doctrine major system capabilities and limitations see Appendixes B “Joint and Service Command and Control Systems ” and C “Joint Fires Networked Systems” and their tactics techniques and procedures Typical coordinating instructions found in the joint fire support annex include a List the targeting products target selection standards TSS matrix high payoff target list and attack guidance matrix b List FSCMs c Refer to time of execution of program of fires d Include ROE e List fire support rehearsal times and requirements f List target allocations g Specify the datum or coordinate system to be used For additional information on coordinating instructions see JP 3-09 Joint Fire Support JP 3-31 Command and Control for Joint Land Operations and Field Manual FM 331 MCWP 3-40 7 Joint Force Land Component Commander Handbook JFLCC c Information Operations Coordination and Synchronization The coordination and synchronization of lethal or nonlethal effects on a target fires with IO through the targeting process is fundamental to maximizing the effects of both IO and more traditional maneuver strike operations In order to achieve this integration commanders must be able to clearly define the objectives they desire to achieve so staffs can develop supporting effects and incorporate them into the commander’s plan 1 Information Operations Cell The IO cell coordinates and synchronizes IRCs to accomplish JFC objectives Uncoordinated IO can compromise complicate negate or harm other military operations as well as other United States Government USG information activities JFCs must ensure IO planners are fully integrated into the planning and targeting process including the JTCB Successful integration synchronization and execution of an information strategy requires early detailed IO planning coordination and deconfliction with USG interagency efforts 76 2 Information Environment Understanding the unique nature of the information environment further enables effective coordination and synchronization of IO The information environment is the aggregate of individuals organizations and systems that collect process disseminate or act on information This environment consists of three interrelated dimensions which continuously interact with individuals organizations and systems These dimensions are the physical informational and cognitive The JFC’s OE is the composite of the conditions circumstances and influences that affect employment of capabilities and bear on the decisions of the commander i e encompassing physical areas and factors of the air land maritime and space domains as well as the information environment which includes cyberspace a The Physical Dimension The physical dimension is composed of C2 systems key decision makers and supporting infrastructure that enable individuals and organizations to create effects It is the dimension where physical platforms and the communications networks that connect them reside The physical dimension includes but is not limited to human beings C2 facilities newspapers books microwave towers computer processing units laptops smart phones tablet computers or any other objects that are subject to empirical measurement The physical dimension is not confined solely to military or even nation-based systems and processes it is a defused network connected across national economic and geographical boundaries b The Informational Dimension The informational dimension encompasses where and how information is collected processed stored disseminated and protected It is the dimension where the C2 of military forces is exercised and where the commander’s intent is conveyed Actions in this dimension affect the content and flow of information c The Cognitive Dimension The cognitive dimension encompasses the minds of those who transmit receive and respond to or act on information It refers to individuals’ or groups’ information processing perception judgment and decision making These elements are influenced by many factors to include individual and cultural beliefs norms vulnerabilities motivations emotions experiences morals education mental health identities and ideologies Defining these influencing factors in a given environment is critical for understanding how to best influence the mind of the decision maker and create the desired effects As such this dimension constitutes the most important component of the information environment For additional information on IO see JP 3-13 Information Operations d Cyberspace Operations Coordination and Synchronization Most aspects of joint operations rely on cyberspace Cyberspace is a global domain within the 77 information environment and one of the five interdependent domains the others being the physical domains of air maritime land and space CO rely on interdependent networks of information technology IT infrastructures including the Internet telecommunications networks computer systems and embedded processors and controllers and the content that flows across and through the components Activities in the physical domains can create effects in and through cyberspace by affecting the EMS or the physical infrastructure 1 Domain Overlap The JFC must consider domain overlap when employing CO Other capabilities the JFC may employ in conjunction with CO include EW EMS management C2 ISR navigation warfare NAVWAR and some space mission areas The JFC and staff must be familiar with the different coordinating requirements early in the planning process in order to comply with US law and facilitate effective and timely CO The cyberspace support element in coordination with the CCMD joint cyberspace center is best suited to minimize domain overlap 2 CO considerations include the intrinsic or acquired characteristics of targets in cyberspace Cyberspace can be viewed as having the following three layers See Figure III-1 a Physical network layer is comprised of the geographic component and physical network components It is the medium where data travels Geographic is the location on land sea air or space where elements of the network reside The physical network component is comprised of the hardware systems software and infrastructure b Logical network layer consists of those elements of the network that are related to one another that is abstracted from the physical network such as a single web site hosted on servers in multiple physical locations c Cyber persona layer is an online identity that facilitates communication decision making and influencing of audiences in the cognitive dimension Figure III-1 The Three Layers of Cyberspace 78 3 One of the key challenges in targeting is to identify coordinate and deconflict multiple activities occurring across multiple layers Due to the dynamic nature of these aforementioned cyberspace layers use of CO in the targeting policy is especially challenging For additional information on CO see JP 3-12 Cyberspace Operations Classified e Combat Identification Combat identification CID is the process of attaining an accurate characterization of detected objects in the OE sufficient to support an engagement decision Depending on the situation and the operational decisions that must be made this characterization may be limited to “friend ” “enemy ” or “neutral ” In other situations other characterizations may be required such as class type nationality and mission configuration CID characterizations when applied with ROE enable engagement decisions and the subsequent use or prohibition of use of lethal and nonlethal weapons to create targeting effects in support of targeting objectives CID is used for force posturing C2 SA and strike no-strike employment decisions 1 The JFC’s CID procedures should be developed early during planning and ROE development Important considerations include the missions capabilities and limitations of all participants including multinational forces other USG departments and agencies intergovernmental organizations IGOs and nongovernmental organizations NGOs There are many different CID procedures and systems currently in use by US and multinational forces Experience has proven that early identification of common CID procedures significantly increases CID effectiveness 2 CID-related information exchange is driven by the need for friendly and neutral force SA location identification of restricted sites and structures and identification of threat objects CID information requires constant coordination and should be conveyed to decision makers in an understandable manner For additional information on CID See JP 3-09 Joint Fire Support f Positive Identification PID is an identification derived from observation and analysis of target characteristics including visual recognition electronic support systems non-cooperative target recognition techniques identification friend or foe systems or other physics-based identification techniques During dynamic targeting PID is acquired during Step 2 Fix of find fix track target engage and assess F2T2EA and CID is acquired prior to engagement g Control and Coordination Measures JFCs establish various FSCMs maneuver control measures and airspace coordinating measures ACMs to facilitate effective joint operations These include but are not limited to permissive restrictive measures boundaries phase lines PLs fires support areas and formal informal airspace control areas 79 1 Fire Support Coordination Measures Within their OAs land and maritime commanders employ permissive and restrictive FSCMs to expedite attack of targets protect forces populations critical infrastructure and sites of religious or cultural significance clear joint fires deconflict joint fire support operations and establish conditions for future operations Along with other control and coordination measures FSCMs and their associated procedures help ensure joint fire support does not jeopardize troop safety interfere with other attack means or disrupt operations of adjacent subordinate units A commander’s geographic location and adjustment to control and coordination measures must be consistent with the location of friendly forces the concept of the operation anticipated enemy actions and in consultation with superior subordinate supporting and affected commanders a Permissive Measures The primary purpose of permissive measures is to facilitate the attack of targets Permissive measures facilitate reducing or eliminating coordination requirements for the engagement of targets with conventional means 1 Coordinated Fire Line CFL is a line beyond which conventional and indirect surface joint fire support means may fire at any time within the boundaries of the establishing HQ without additional coordination The purpose of the CFL is to expedite the surface-to-surface engagement of targets beyond the CFL without coordination with the land commander in whose area of operation the targets are located The CFL is usually established by a brigade or division commander equivalent but it can also be established by a maneuver battalion especially in amphibious operations 2 Fire support coordination lines FSCLs facilitate the expeditious engagement of TOO beyond the coordinating measure An FSCL does not divide an AO by defining a boundary between close and deep operations or a zone for CAS The FSCL applies to all fires of air- land- and sea-based weapon systems using any type of munition against surface targets 3 Free-Fire Area A free-fire area is a specifically designated area into which any weapon system may fire without additional coordination with the establishing HQ It is used to expedite joint fires and to facilitate emergency jettison of aircraft munitions 4 Kill Boxes A kill box is a three-dimensional area used to facilitate the integration of joint fires When established the primary purpose of a kill box is to allow lethal attack against surface targets without further coordination with the establishing commander and without terminal attack control When used to integrate air-to-surface and surface-to-surface indirect fires the kill box will have appropriate restrictions The goal is to 80 reduce the coordination required to fulfill support requirements while providing maximum flexibility and preventing fratricide A kill box will not be established specifically for CAS missions b Restrictive Measures Restrictive measures impose requirements for specific coordination before engagement of targets 1 Restrictive Fire Line The restrictive fire line is a line established between converging friendly forces — one or both may be moving — that prohibits joint fires or the effects of joint fires across the line without coordination with the affected force The purpose of the line is to prevent fratricide and duplication of engagements by converging friendly forces 2 No-Fire Area The purpose of the no-fire area NFA is to prohibit joint fires or their effects into an area There are two exceptions first when the establishing HQ approves joint fires within the NFA on a mission-bymission basis second when an enemy force within the NFA engages a friendly force and the engaged commander determines there is a requirement for immediate protection and responds with the minimal force needed to defend the force 3 Restrictive Fire Area A restrictive fire area RFA is an area where specific restrictions are imposed and in which joint fires or the effects of joint fires that exceed those restrictions will not be delivered without coordination with the establishing HQ The purpose of the RFA is to regulate joint fires into an area according to the stated restrictions 4 Zone of Fire A zone of fire ZF is an FSCM that includes the area within which a designated ground unit or fire support ship delivers or is prepared to deliver joint fire support Joint fires may or may not be observed Land is divided into ZFs which are assigned to gunfire support ships and units as a means to coordinate their efforts with each other and with the scheme of maneuver of the supported ground unit Units and ships assigned ZFs are responsible for engaging known targets and TOO according to their mission and the guidance of the supported commander 2 Maneuver Control Measures JFCs and other commanders at the operational level of war often use boundaries maneuver control measures and fire support coordinating measures to control and coordinate the operations of their forces in the battlespace These measures are usually employed to delineate AOs or other areas where components or subordinate commands will conduct their operations or to coordinate maneuver or fires between adjacent units a Boundaries In land warfare a boundary is a line by which surface AOs between adjacent units or formations are defined Boundaries designate the geographical limits of the AOs of a unit Within their boundaries 81 units may execute joint fires and maneuver without close coordination with neighboring units unless otherwise restricted Normally units do not fire across boundaries unless the fires are coordinated with the adjacent unit or the fires are beyond an FSCM such as a CFL These restrictions apply to conventional and special munitions and their effects When fires such as smoke and illumination affect an adjacent unit coordination with that unit is normally required A commander can in certain situations decide to fire across boundaries at positively identified enemy elements without coordination However direct and observed joint fires should be used when firing across boundaries at positively identified enemy forces when there is no time to coordinate with adjacent friendly units b Phase Lines A PL is used by land forces for control and coordination of military operations It is usually a recognizable terrain feature extending across the zone of action Units normally report crossing PLs but do not halt unless specifically directed PLs can be used to identify limits of advance control joint fires or define an AO The purpose of each PL and any actions required by forces affected by the PL will be specified in the OPORD of the establishing HQ Any commander given an AO can establish PLs c Fire Support Area and or Fire Support Station A fire support area FSA is an appropriate maneuver area assigned to fire support ships by the maritime commander from which they deliver surface joint fire support to an operation ashore A FSA is normally associated with amphibious operations but can be used whenever it is desirable to have a fire support ship occupy a certain geographic position A fire support station FSS is an exact location at sea within an FSA from which a fire support ship delivers joint fire This designation is used to station ships in order to be able to reach certain targets For example a ship in a FSA may not be able to reach a certain target except when it is stationed at the FSS 3 Airspace Coordinating Measures and Area a Airspace Coordinating Measures ACMs are critical to the successful employment of joint fires A key to effectively coordinating joint fires is to constantly view the OE as a three-dimensional area ACMs are nominated from subordinate HQ through component command HQ and forwarded to the ACA in accordance with the air control plan Most ACMs impact on direct and indirect joint fires trajectories and unmanned aircraft systems UASs because of their airspace use Some ACMs may be established to permit surface joint fires or UAS operations The component commanders ensure ACM nominations support and do not conflict with joint operations prior to forwarding to the JAOC The ACA approves formal ACM nominations and includes them in the ACO The ACA consolidates coordinates and deconflicts the airspace requirements of the components and publishes the ACMs in the ACO The ACO is 82 normally published at least daily and is often distributed both separately and as a section of the ATO b Airspace Coordination Area The ACA is the primary ACM which reflects the coordination of airspace for use by air support and indirect joint fires ACAs are used to ensure aircrew safety and the effective use of indirect supporting surface joint fires by deconfliction through time and space The ACA is a block or corridor of airspace in which friendly aircraft are reasonably safe from friendly surface fires A formal ACA a three-dimensional box of airspace requires detailed planning More often an informal ACA is established using time lateral separation or altitude to provide separation between surface-to-surface and air-delivered weapon effects For additional information on control and coordination measures see JP 3-09 Joint Fire Support 3 Planning Considerations a Joint Fire Support When planning joint fire support JFC’s should consider the following missions and unique aspects of fire support 1 Close Air Support CAS is an element of joint fire support Although simple in concept CAS requires detailed planning coordination and training for effective and safe execution Synchronizing CAS in time space and purpose with supported maneuver forces increases the effectiveness of the joint force CAS assists land maritime amphibious and SOF to move maneuver and control territory populations and key waters a CAS is air action by fixed- and rotary-winged aircraft against hostile targets that are in close proximity to friendly forces and which require detailed integration of each air mission with the fire and movement of those forces CAS provides supporting firepower in offensive and defensive operations to destroy disrupt suppress fix harass neutralize or delay enemy targets The speed range and maneuverability of airpower allow CAS assets to attack targets that other supporting arms may not be able to engage effectively CAS can be conducted at any place and time friendly forces are in close proximity to enemy forces and at times may be the best means to exploit tactical opportunities Although in isolation it rarely achieves operational-level objectives at times it may be the more critical mission due to its contribution to them CAS should be planned to set the conditions for success or reinforce successful attacks of surface forces b Each Service organizes trains and equips to employ CAS within its roles as part of the joint force As a result a variety of aircraft are capable of 83 performing CAS The JFC and his staff must be capable of integrating CAS capabilities into the CONOPS For additional information on CAS see JP 3-09 3 Close Air Support 2 Countering Air and Missile Threats The counterair mission integrates both offensive and defensive operations by all capable joint force components and counters the air and missile threat by attaining and maintaining the degree of air superiority and protection desired by the JFC Counterair operations may use the range of military capabilities to neutralize or destroy enemy aircraft missiles and launchers before and after launch Generally OCA operations seek to dominate enemy airspace and prevent the launch of threats while defensive counterair DCA operations defeat enemy air and missile threats attempting to penetrate or attack through friendly airspace Counterair operations may employ aircraft with weapons or sensors surface-to-surface missiles surface-to-air missiles ADA air-to-surface missiles SOF EA or IO a Offensive Counterair OCA is offensive operations to destroy disrupt or neutralize enemy aircraft missiles launch platforms and their supporting structures and systems both before and after launch and as close to their source as possible The goal of OCA operations is to prevent the launch of enemy aircraft and missiles by destroying them and their overall supporting infrastructure prior to employment Prior planning and accurate and timely intelligence are key to locating and attacking OCA targets as well as their supporting elements b Defensive Counterair DCA is all defensive measures designed to detect identify intercept and neutralize or destroy enemy forces attempting to penetrate or attack through friendly airspace DCA includes both active and passive AMD measures to protect friendly forces critical assets population centers infrastructure etc and deny enemy freedom of action in friendly airspace The goal of DCA operations in concert with OCA operations is to provide an area from which forces can operate while protected from air and missile threats DCA operations must be integrated and synchronized with OCA operations and all other joint force operations The AADC normally is responsible for developing an integrated air defense system IADS by integrating the capabilities of different components with a robust C2 architecture Because of their time-sensitive nature DCA operations require streamlined coordination and decision-making processes For additional information on countering air and missile threats see JP 3-01 Countering Air and Missile Threats 3 Interdiction Operations Interdiction operations are actions to divert disrupt delay or destroy the enemy’s military surface capabilities before they 84 can be used effectively against friendly forces or to otherwise achieve objectives In support of law enforcement interdiction includes activities conducted to divert disrupt delay intercept board detain or destroy under lawful authority vessels vehicles aircraft people cargo and money a Forces that can conduct interdiction operations include those listed in Figure III-2 Interdiction-Capable Forces Figure III-2 Interdiction-Capable Forces b Air Interdiction AI is generally conducted at such distances from friendly forces that detailed integration of each air mission with the fire and movement of friendly forces is not normally required AI may operate as a supported part of the overall JFC strategy or it may indirectly support the land component When conducted as part of a joint operation interdiction needs the direction of a single commander who can exploit and coordinate all the forces involved whether air space surface or information-based To ensure unity of command and effort of air operations throughout a theater JOA the JFC normally delegates the planning and execution of theater JOA-wide AI operations to the component commander with the preponderance of AI assets with 85 theater JOA wide range and the ability to control them The JFACC normally is designated the supported commander for the JFC’s overall AI effort and will conduct JOA-wide AI in DS of the JFC’s objectives The JFACC in coordination with other component commanders recommends JOA-wide targeting and apportionment priorities and submits them to the JFC for approval c Interdiction in the maritime domain can isolate an enemy from outside sea-borne support halt undesired maritime activity and enforce legal sanctions It can also enhance free use of the sea lines of communications LOCs for such friendly operations as deployment of forces and can provide security for other naval operations Interdiction in the maritime domain can be significantly different from operations in other domains due to the complexities of international law of the high seas d Maritime capabilities such as the TLAM can be effective interdiction assets and provide a potent employment option to the joint force Utilization of the TLAM weapon system may require coordination between strike planners in-theater and supporting mission planners out of theater i e cruise missile support activities Planning timelines will need to take this requirement into consideration e The growing dependence on information IT systems and cyberspace by all forces and functions creates opportunities to use IO against the enemy IO complements interdiction through a variety of means and can be used to accomplish interdiction objectives ideally achieving the goals before friendly forces engage the enemy Additionally the synergistic effects of MISO conducted in parallel with interdiction operations can attack the enemy’s will to fight simultaneously The psychological shock of massed joint interdiction and IO can be overwhelming to the enemy’s fielded forces especially when those forces have already been strained by surface combat For additional information on interdiction see JP 3-03 Joint Interdiction 4 Strategic Attack Operations A strategic attack is a JFC-directed offensive action against a target — whether military political economic or other — that is specifically selected to achieve national or military strategic objectives These attacks seek to weaken the adversary’s ability or will to engage in conflict or continue an action and could be part of a campaign major operation or conducted independently as directed by the President or SecDef Additionally these attacks may achieve strategic objectives without necessarily having to achieve operational objectives as a precondition Suitable targets may include but are not limited to enemy strategic COGs All components of a joint force may have capabilities to conduct strategic attacks 86 5 Airspace Control All missions involving the use of airspace are subject to airspace control via the airspace control plan ACP and ACO both developed by the ACA Airspace control increases combat effectiveness by promoting the safe efficient and flexible use of airspace with minimum restraint placed upon the airspace users Joint airspace control includes coordinating integrating and regulating airspace to increase operational effectiveness It provides centralized direction for the use of airspace within the OA and serves as a means to eliminate fratricide a Airspace control procedures provide flexibility through an effective combination of positive and procedural control measures Airspace control procedures objectives are outlined in Figure III-3 Airspace Control Procedures Objectives Figure III-3 Airspace Control Procedures Objectives b The methods of airspace control vary across the range of military operations They range from positive control of all air assets in an airspace control area to procedural control of all such assets or any effective combination of the two see Figure III-4 Methods of Airspace Control 87 Figure III-4 Methods of Airspace Control c AD operations must be integrated with other tactical air operations within the OA through the air defense plan ADP Weapons control procedures and airspace control measures for all AD weapon systems and forces must be established These procedures must facilitate defensive air operations while minimizing the risk of fratricide For additional information on airspace control see JP 3-52 Airspace Control JP 3-30 Command and Control for Joint Air Operations and JP 3-01 Countering Air and Missile Threats and FM 3-52 1 AFTTP 3-2 78 MTTP for Airspace Control b Information Operations Considerations The integration of IRCs to achieve the commander’s objectives is managed through an IO staff or IO cell JFCs may establish an IO staff to provide command-level oversight and collaborate with all staff directorates and supporting organizations on all aspects of IO It is important to remember IO is not about ownership of individual capabilities but rather the use of those capabilities as force multipliers to create a desired effect JFC’s should consider the following IRCs when integrating IO with joint fires 1 Commander’s Communication Synchronization Through commander’s communication synchronization public affairs information operations and defense support to public diplomacy are realized as communication supporting capabilities Leaders planners and operators at all levels need to understand the desired effects and anticipate potential undesired effects of our actions and words identify key audiences and when appropriate actively address their perspectives Inconsistencies between what US forces say and do can reduce DOD credibility and negatively affect current and future missions An effective combination of themes messages images and actions consistent with higher-level guidance is essential to effective DOD operations 88 2 Joint Interagency Coordination Group Interagency coordination occurs between the DOD and other USG departments and agencies as well as with private-sector entities NGOs and critical infrastructure activities for the purpose of accomplishing national objectives Many of these objectives require the combined and coordinated use of the diplomatic informational military and economic instruments of national power Due to their forward presence the CCMDs are well-situated to coordinate activities with elements of the USG regional organizations foreign forces and host nations In order to accomplish this function the GCCs have established joint interagency coordination groups JIACGs as part of their normal staff structures see Figure II-4 Planning Process and Battle Rhythm The JIACG is well-suited to help the IO cell with interagency coordination Although IO is not the primary function of the JIACG the group’s linkage to the IO cell and the rest of the interagency is an important enabler for synchronization of guidance and IO 3 Public Affairs PA comprises public information command information and public engagement activities directed toward both the internal and external publics with interest in the DOD External publics include allies neutrals adversaries and potential adversaries When addressing external publics opportunities for overlap exist between PA and IO 4 Civil-Military Operations CMO activities establish maintain influence or exploit relations between military forces governmental and nongovernmental civilian organizations and authorities and the civilian populace in a friendly neutral or hostile OA in order to achieve US objectives These activities may occur prior to during or subsequent to other military operations In CMO personnel perform functions normally provided by the local regional or national government placing them into direct contact with civilian populations This level of interaction results in CMO having a significant effect on the perceptions of the local populace Since this populace may include potential adversaries their perceptions are of great interest to the IO community For this reason CMO representation in the IO cell can assist in identifying TAs synchronizing communications media assets and messages and provide news and information to the local population 5 Information Assurance Information assurance IA is necessary to gain and maintain information superiority The JFC relies on IA to protect infrastructure to ensure its availability to position information for influence and for delivery of information to the adversary Furthermore IA and CO are interrelated and rely on each other to support IO 6 Space Operations Space capabilities are a significant force multiplier when integrated with joint operations Space operations support IO through the space force enhancement functions of ISR missile warning environmental monitoring satellite communications and space-based positioning 89 navigation and timing PNT The IO cell is a key place for coordinating and deconflicting the space force enhancement functions with other IRCs 7 Military Information Support Operations MISO are planned operations to convey selected information and indicators to foreign audiences to influence their emotions motives objective reasoning and ultimately the behavior of foreign governments organizations groups and individuals MISO focuses on the cognitive dimension of the information environment where its TA includes not just potential and actual adversaries but also friendly and neutral populations MISO are applicable to a wide range of military operations such as stability operations security cooperation maritime interdiction noncombatant evacuation foreign humanitarian operations counterdrug force protection and counter-trafficking Given the wide range of activities in which MISO are employed the military information support representative within the IO cell should consistently interact with the PA CMO JIACG and IO planners 8 Intelligence Intelligence is a vital military capability that supports IO The intelligence integration to support information operations greatly facilitates understanding the interrelationship between the physical informational and cognitive dimensions of the information environment 9 Military Deception One of the oldest IRCs used to influence an adversary’s perceptions is MILDEC MILDEC can be characterized as actions executed to deliberately mislead adversary decision makers creating conditions that will contribute to the accomplishment of the friendly mission While MILDEC requires a thorough knowledge of an adversary or potential adversary’s decision-making processes it is important to remember it is focused on desired behavior It is not enough to simply mislead the adversary or potential adversary MILDEC is designed to cause them to behave in a manner advantageous to the friendly mission such as misallocation of resources attacking at a time and place advantageous to friendly forces or avoid taking action at all 10 Operations Security Operations security OPSEC is a standardized process designed to meet operational needs by mitigating risks associated with specific vulnerabilities in order to deny adversaries critical information and observable indicators OPSEC identifies critical information and actions attendant to friendly military operations to deny observables to adversary intelligence systems Once vulnerabilities are identified other IRCs e g MILDEC CO can be used to satisfy OPSEC requirements OPSEC practices must balance the responsibility to account to the American public with the need to protect critical information The need to practice OPSEC should not be used as an excuse to deny noncritical information to the public 11 Special Technical Operations IO need to be deconflicted and synchronized with special technical operations STO Detailed information 90 related to STO and its contribution to IO can be obtained from the STO planners at CCMD or Service component HQ IO and STO are separate but have potential crossover and for this reason a STO planner is a valuable member of the IO cell 12 Joint Electromagnetic Spectrum Operations All information-related mission areas increasingly depend on the EMS Joint electromagnetic spectrum operations JEMSO consisting of EW is the mission area ultimately responsible for securing and maintaining freedom of action in the EMS for friendly forces while exploiting or denying it to adversaries JEMSO therefore supports IO by enabling successful mission area operations 13 Key Leader Engagement Key leader engagements are deliberate planned engagements between US military leaders and the leaders of foreign audiences that have defined objectives such as a change in policy or supporting the JFC’s objectives These engagements can be used to shape and influence foreign leaders at the strategic operational and tactical levels and may also be directed toward specific groups such as religious leaders academic leaders and tribal leaders e g to solidify trust and confidence in US forces 14 Cyberspace Operations Cyberspace is a global domain within the information environment consisting of the interdependent network of IT infrastructures and resident data including the Internet telecommunications networks computer systems and embedded processors and controllers CO are the employment of cyberspace capabilities where the primary purpose is to achieve objectives in or through cyberspace Cyberspace capabilities when in support of IO deny or manipulate adversary or potential adversary decision making through targeting an information medium such as a wireless access point in the physical dimension the message itself e g an encrypted message in the information dimension or a cyber-persona e g an online identity that facilitates communication decision making and the influencing of audiences in the cognitive dimension When employed in support of IO CO generally focus on the integration of offensive and defensive capabilities exercised in and through cyberspace in concert with other IRCs and coordination across multiple LOOs and lines of effort For additional information on IO see JP 3-13 Information Operations c Cyberspace Operations Planning and Targeting Considerations It is important to understand the relationship between IO and CO In the past CO were considered a subset of IO and those operations incorporated in terms of computer network operations computer network attack computer network defense and computer network exploitation However CO are used to create effects which support operations across the physical domains and cyberspace’s global domain 91 1 Successful execution of CO requires integrated and synchronized offensive defensive and Department of Defense information networks DODIN operations that are aligned with timely operational preparation of the environment CO missions are categorized as offensive cyberspace operations defensive cyberspace operations and DODIN operations All CO missions are informed by timely intelligence and threat indicators from a variety of DOD and non-DOD sources and assessments 2 Cyberspace capabilities provide the means to gain and maintain a strategic and continuing advantage in the OE The OE factors affecting CO vary in importance according to mission For example CO associated with an air mission may require transmission through the EMS which may be significantly degraded by both congestion and or an adversary EA CO in support of an IO objective may be more affected by the political climate or an individual’s communication habits 3 With the continued rapid evolution of information and communications technology ICT governments and militaries are rethinking the context which they operate State and non-state users of ICT can pose a significant threat to the US The application of cyberspace capabilities provides a low cost asymmetric alternative to costly weapons systems for those actors who do not possess the US’s traditional military force capabilities With this in mind it is essential the JFC have a full grasp of the OE and information environment while controlling key terrain in cyberspace 4 CO capabilities should be considered during joint operation planning integrated into the JFC’s plan and synchronized with other operations during execution Because of the increased reliance on cyberspace especially in C2 and logistics functions outside DOD networks the JFC should focus integration efforts on the following a Centralized CO planning for DODIN operations and defense b Synchronization of fires and operations c Deconfliction requirements between government entities d Partner nation’s relationships e Relationships between CO and IO f CO in the physical domains g Legal issues related to CO especially when crossing international and domestic boundaries 92 5 Targeting deconfliction commander’s intent political military assessment and considerations on collateral effects all play into the CO planner’s calculation and efforts Similarly all principles of joint operations such as maneuver and surprise are relevant to CO However second- and higherorder effects in and through cyberspace can be more difficult to predict necessitating more branches and sequels during JOPP 6 When incorporating CO into the JFC’s targeting process three aspects should be included a Recognizing cyberspace capabilities as a viable option for engaging designated targets b Understanding that a CO option may be preferable in some cases because it may have a low probability of detection and c First- second- and third- order effects on targets may involve or affect the DODIN 7 Cascading and collateral effects unique to CO should be considered when integrating CO capabilities into the targeting process This is particularly true when recognizing the overlaps between military civil government corporate and private activities over shared networks Effects can occur through a targeted system often cascading into other systems The cascading of direct and indirect effects usually flows from higher to lower although in CO that may not necessarily be the case With this in mind an execute order or applicable ROE may limit CO to those operations that result in no or minimal levels of collateral effects The proposed CO must also be permissible under a LOW proportionality analysis 8 Other CO planning considerations include a Department of Defense Information Network Operations The US military’s reliance on cyberspace is well-understood by our adversaries DODIN operations underlie nearly every aspect of the JFC’s operations throughout the OE However it is often overlooked as a planning consideration JFC planning to ensure DODIN resiliency in the face of cyberspace threats is essential b Time The rapid pace of CO requires significant pre-operational collaboration as well as constant vigilance upon initiation This ensures activities in cyberspace and throughout the OE are coordinated and deconflicted in advance Once CO are undertaken planners and operators must maintain SA and assess the impacts to the joint force including the security posture configuration changes and indications and warning I W of adversary activity 93 c Electromagnetic Spectrum Planners should also maintain SA of the EMS and its impact on mobile devices and wireless networks including cellular wireless local area networks Global Positioning System GPS and other commercial uses of the EMS CO and EA to include offensive space control must be deconflicted d Insider threats are a significant threat to the joint force Because of their trusted relationship and access to DODIN malicious activity may be far more reaching and intrusive than external entities attempting to gain access JFCs must consider risk mitigation for this threat including training to the joint force on insider threat activity recognition e Navigation Warfare CO produces NAVWAR effects by assuring friendly access and or denying adversary access to PNT information transmitted by global navigation satellite systems Creation of global and theater NAVWAR effects is attained through the coordinated employment of CO EW and space operations 9 Assessment of CO at the operational level follows along the same lines as the assessment phase in the JTC where objectives and desired effects are developed by the JFC’s staff and pushed down to the tactical level to develop tactical-level objectives tasks and subordinate targeting objectives and effects CO are a recent addition in the development of operational level MOPs and MOEs Activities in cyberspace alone will have operational-level effects For example the use of cyberspace attack to take down or corrupt an adversary’s headquarters’ network may reverberate throughout the entire JOA a CO assessment may be unique to a normal assessment cell and the assessment cell may not have the expertise or capabilities to assess CO Furthermore CO typically involves multiple commands such as the JFC Commander US Cyber Command and other functional components Therefore CO assessments will require close coordination among each staff and across multiple commands Coordination and federation of the assessment effort will require these efforts to be planned and in place well before execution For additional information on CO see JP 3-12 Cyberspace Operations Classified 94 SECTION B JOINT TARGETING CYCLE 1 Joint Targeting Cycle Introduction a Overview The JTC is a six-phase iterative process that provides a helpful framework to describe the steps that must be satisfied to successfully conduct joint targeting see Figure III-5 Joint Targeting Cycle This cycle is neither time-constrained nor time-dependent and steps may occur concurrently The purpose of joint targeting is to integrate and synchronize fires into joint operations by utilizing available capabilities to generate a specific lethal or nonlethal effect on a target It can be conducted in multinational operations and may involve participation from other agencies governments and organizations An effective disciplined joint targeting process helps minimize undesired effects potential for collateral damage and reduces inefficient actions during military operations It supports the successful application of several principles of war mass maneuver and economy of force Figure III-3 Joint Targeting Cycle b The joint targeting process integrates military capability to create effects in support of JFC objectives and end state The deliberate and dynamic nature of the JTC supports joint operation planning and execution providing the depth and flexibility required to support the CONOPS and commander’s intent as opportunities arise and plans change In consultation with component commanders the JFC sets priorities provides clear targeting guidance and 95 determines the weight of effort to be provided to various operations Component commanders ensure their schemes of maneuver comply with the JFC's guidance and priorities If they do not have the capability to prosecute priority targets in a timely fashion they may submit HVTs and HPTs for incorporation into the joint targeting process 2 Phase 1 – End State and Commander’s Objectives a Overview Understanding the military end state JFC’s intent COGs objectives desired effects and required tasks developed during operational planning provides the operational level initial framework for the targeting process The military end state is the set of required conditions that defines achievement of the commander’s operational objectives The commander’s operational objectives are developed during the mission analysis step of JOPP typically derived from theater-strategic or national-level guidance An important result of mission analysis is the commander’s intent statement and initial planning guidance see Figure III-6 Mission Analysis Commander’s intent is a clear and concise expression of the purpose of the operation and the military end state This statement which the commander revises throughout the course of planning deals primarily with the military conditions that lead to mission accomplishment so the commander may highlight selected objectives desired effects and required tasks Commander’s initial planning guidance focuses the planning effort and should include the mission statement assumptions operational limitations a discussion of the national strategic end state termination criteria military objectives the JFC’s initial thoughts on desired and undesired effects address the role of agencies and multinational partners in the pending operation and any related special considerations Figure III-6 Mission Analysis 96 1 Understanding the JFC’s guidance CONOPS and intent is the most important and first activity of joint targeting because they document the set of outcomes relevant to the present situation and set the course for all that follows Objectives are the basis for developing the desired effects and scope of target development and are coordinated among strategists planners and intelligence analysts for approval by the commander Attainment of clear measurable and achievable objectives is essential to the successful realization of the desired end state The ability to generate the type and extent of effects necessary to achieve the commander’s objectives distinguishes effective targeting 2 Equally important is the development of observable achievable and reasonable measures such as MOEs and MOPs and indicators to assess whether the effects and objectives are being or have been attained Measures and indicators help focus target development within the joint targeting process and are critical to enable assessment Measures and indicators are coordinated between operations plans and intelligence for approval by the commander 3 The commander must provide the direction and prioritization necessary for the effective conduct of intelligence activities because intelligence assets are rarely sufficient to satisfy every requirement The commander provides this focus through the articulation of the CCIRs CCIRs are clearly spelled out in the CONOPS and detailed in the intelligence annex which drives collection exploitation production and dissemination efforts Integrating timely and relevant intelligence into the targeting effort assists the JTCB in developing recommended JFC targeting guidance The pivotal role played by this guidance in the targeting process requires operations and staff members to continually monitor current intelligence for changes and adjust accordingly b Joint Intelligence Preparation of the Operational Environment The JIPOE is the analytical process used by joint intelligence organizations to produce intelligence assessments estimates and other intelligence products in support of the JFC’s decision-making process It is a continuous process that involves four major steps 1 defining the total OE 2 describing the impact of the OE 3 evaluating the adversary and 4 determining and describing adversary potential courses of action COAs particularly the adversary’s most likely COA and the COA most dangerous to friendly forces and mission accomplishments 1 The process is used to analyze the physical domains e g air land maritime and space the information environment which includes cyberspace PMESII systems and all other relevant aspects of the OE and to determine an adversary’s capabilities to operate within that environment JIPOE products are used by joint force component and supporting command staffs in preparing their estimates and are also applied during the analysis and selection of friendly COAs 97 2 The J-2s at all levels coordinate and supervise the JIPOE effort to support joint operation planning enable commanders and other key personnel to visualize the full range of relevant aspects of the OE identify adversary COGs conduct assessment of friendly and enemy actions and evaluate potential adversary and friendly COAs 3 The JIPOE process is a fundamental step in the planning process and is important to target development This is because JIPOE provides an understanding of the relationship between adversary COGs This baseline intelligence illuminates which decisive points offer opportunity to attack the adversary’s COGs directly and indirectly extend friendly operational reach or enable the application of friendly forces and capabilities Targeteers and planners should resolve any misunderstanding or unclear objectives Along with a dynamic threat assessment JIPOE products provide much of the substantive identification baseline analysis characterization of systems functional capabilities that inform target development and target systems analysis 4 During planning targeteers will evaluate the objectives and the adversary COGs as described in JIPOE for selection of target systems The purpose is to characterize the function criticality and vulnerabilities of each potential target It is essential to link targets back to targeting objectives and MOEs developed during the end state and commanders objectives phase of the JTC to weigh resources toward the most relevant and valuable target systems c Risk Management Risk is inherent in military operations Risk management is the process of identifying assessing and controlling risks arising from operational factors and making decisions that balance risk cost with mission benefits 1 Risk management is a function of command and a key planning consideration Risk management is relevant at all levels of war across the range of military operations and through all phases of an operation and its branches and sequels To alleviate or reduce risk commanders may take a variety of actions such as changing the concept of operations CONOPS changing the plan for employment of operational fires or executing a branch to the original plan 2 When planning the application of forces and capabilities the JFC should not be completely constrained by the strategic plan’s force apportionment if additional resources are justifiable and no other COA within the allocation reasonably exists The commander identifies and resolves shortfalls with a risk assessment as a part of the force planning This includes a list of the specific hazards that the joint force may encounter during the mission and a list of risk mitigation measures The additional capability requirements will be coordinated with the Joint Staff JS through the development process 98 Risk assessments will include results using both allocated capabilities and additional capabilities 3 Acceptable risk level can be presented in a risk table see Table III-1 This table may also include guidance on who can approve tasking missions with high to extreme risks The contents of this table should come from discussions between the JFC and the JFACC By signing the AOD the JFC with input from the JFACC is approving the level of acceptable risk as described in this table Table III-2 Risk Table d Centers of Gravity Identification Using the systems perspective of the OE aids COG identification and analysis by mapping the nodes and links in each adversary system A COG is defined as the source of power that provides moral or physical strength freedom of action or will to act The COG will typically be well defended therefore the indirect approach will need to focus on the critical capabilities critical requirements and critical vulnerabilities of that COG 1 Political considerations military risk the LOW and ROE will influence the ways and means of attacks on the critical vulnerabilities Further the identification and use of decisive points LOO and other operational design elements allows the JFC and staff to consider a broader set of fires options that focus limited resources to create the desired effects in support of the JFC’s objectives 2 Where direct attacks against adversary COGs mean attacking an opponent’s strength JFCs must weigh the risk appropriately to determine if friendly forces possess the power to attack with acceptable risk In the event a direct attack is not a reasonable solution JFCs should seek an indirect approach until conditions are established that permit successful direct attacks The effect of 99 properly planned IO is to provide the commander with a force multiplier that can potentially reduce risk and enhance success e Operational and Targeting Objectives An objective is the clearly defined decisive and attainable goal toward which every military operation should be directed Because objectives are essential to unified action the JFC will identify one or more operational-level objectives during the JOPP and operational design These will not be physical objectives e g a definite tactical feature the destruction of an enemy force without regard to terrain features although occasionally they may overlap Targeting objectives in contrast are typically physical unless dealing in the non-physical environments of cyberspace or the information environment 1 Targeting objectives must have the following characteristics a Observable The targeting objective must strive for some visible change in an enemy’s behavior For example “Destroy the XXX Corps if it moves out of its assembly area to eliminate its exploitation potential ” From this objective it is clear the JFC intends to contain the enemy unit to a particular location for a period of time b Quantifiable The change in enemy behavior must be related to some quantifiable end Specific levels of expected results must be identified i e the percentage of destruction the effect created by strikes on a target For example “Destroy coastal mine storage sites capable of being employed in the Gulf of Jacksonville ” It is very easy to quantify the relative success of this targeting objective through various collection assets available once the strikes are completed c Achievable The assets and time available must be sufficient to accomplish the targeting objective—there must be room for a solution Further a targeting objective should not be defined in such a way it requires the attack of a specific target system or creation of a tactical effect that also prohibits fulfilling the objective For example “Reduce enemy capacity to refine crude petroleum by 50 percent for a period of one year without endangering civilian industrial facilities ” Obviously oil refineries are considered to be part of the civilian infrastructure and it is not possible to significantly affect oil-refining capacity without attacking refineries unless an indirect node and link can be identified 2 The JFC’s operational objectives along with the military end state provide foundation for developing the JFC’s targeting guidance and priorities and establish the fundamental criteria for mission success These operational-level objectives are used to determine operational-level effects which are then used along with other operational design elements to develop the JFC’s targeting guidance and priorities establish restrictions for the employment of forces and develop operational-level tasks 100 3 The operational-level tasks are specified in the OPLAN as tasks to subordinates These specified tasks are analyzed by the subordinate commander staff as part of their mission analysis and begins their planning process This planning process develops the tactical objectives effects tasks and provides criteria to link tactical-level tasks to the operational-level tasks and effects that support the operational-level objectives Because of the fundamental role of the JFC’s objectives in the targeting process targeting personnel must fully understand them 4 While a pre-developed extensive target list will often exist in the modernized integrated database MIDB targeting prioritizing targets and matching the appropriate response to them cannot be performed without an understanding of the CONOPS targeting guidance objectives and effects This is often the least understood aspect of the targeting process Specific targeting objectives are derived from JFC’s operational-level objectives effects and tasks JOPP results and operational design An example of an operational task to subordinates might be “Gain and maintain freedom of navigation east of the 76th parallel ” A fires objective to support the operational task might be “Neutralize coastal defense cruise missile sites vicinity Onslow beach ” The targeting process then seeks to achieve the desired tactical effect i e neutralize through fires Considering both lethal and nonlethal effects in targeting planning is required to develop a truly integrated and comprehensive range of targeting options that support the operational tasks effects and objectives In the example above the MOE could be coastal defense cruise missile sites are unable to engage friendly forces 5 Development of targeting objectives must consider the following questions Note These eight questions outlined below do not emanate from doctrine Rather these questions were developed by the Joint Targeting School to aide in developing targeting objectives a Whose behavior do we want to modify Identify the specific people groups or organizations whose behavior we wish to alter For example do we wish to modify the behavior of the political leader military forces the civilian population or a combination of these three b What do we want to make them do Identify the behavior to be affected changed or modified c How much to what degree do we want to affect enemy activity State the criteria using metrics which can be used to assess progress Utilizing consistent assessment metrics at all levels of planning can help assessment analysts more quickly and accurately determine progress 101 d What target effects do we want to create There is a wide variety of means at the disposal of the JFC both lethal and nonlethal However the systems available and the situation may limit the JFC’s options to create a desired targeting effect e When do we want to create the target effect and how long do we want it to last Five principal timing factors must be considered as follows 1 Timing of the Effect Determining the optimum time to create the lethal or nonlethal effect is critical Timing is particularly important in missions against certain categories of targets where activity and productivity vary significantly over time such as barracks supply depots airfields and ports For example an attack against an empty barracks or a supply depot just after the supplies were moved out would accomplish little Likewise operational environmental or survivability factors may dictate a time on target TOT For example there may be a case where enemy defenses may be more easily penetrated during cover of darkness and a TOT of sunrise would aid in target identification 2 Synchronization of the Attack s 3 “Critical Time” Parameters These parameters are time-sensitive tasks or activities that must be effectively and efficiently performed by the enemy for his plans to succeed To target the enemy effectively “critical time” periods must be determined 4 The time from creation of lethal or nonlethal effect until its impact is felt by the enemy Attacking enemy supplies stored near the battle lines will have a more immediate effect on the battle than striking or attacking supplies stored in rear area warehouses or striking enemy factories If the effects of friendly attacks need to be felt immediately different targets may have to be selected than those selected if an immediate impact on the enemy is not required Attempts to have an immediate impact may delay the achievement of longer-range goals Such a trade-off must be considered in establishing the timing criteria 5 Recuperation or Reconstitution Time The neutralization period will influence the type amount and frequency of force to be used Recuperation time should also be considered when formulating CA criteria f Where do we need to create the effect to best impact the adversary activity The specific location e g “nation-wide ” “the eastern sector ” “xxx city” to be targeted should be stated in a targeting objective 102 g Why do we want to create a given effect on the target Unfortunately the “why” frequently is not well thought out is poorly stated or may be misunderstood Not understanding “why” may result in analysis and or recommendations that at best does not create the desired effect or at worst creates an undesired effect with catastrophic consequences h How much risk will be required to achieve the targeting objective and is it worth the risk Assuming a proposed targeting objective is achievable an estimate of the associated risk attrition of equipment and personnel time resources manpower etc and the potential benefit must be weighed carefully f Guidance 1 Guidance begins broadly at the national level and becomes more narrow and specific as successive subordinate commanders issue guidance to devise their plans to employ forces Some sources of higher-level guidance for the JFC and staff pertinent to targeting are the LOW ROE executive orders directives and existing OPLANS OPORDS and warning orders 2 The JFC issues initial targeting guidance early in the planning process The JTCB further develops broad targeting priorities and other targeting guidance in accordance with the JFC’s objectives This guidance will establish how airand surface-delivered fires will be used to support the CONOPS It likely will delineate target set priorities target selection methods dynamic targeting and TST guidance munitions usage and restrictions Some considerations for developing the targeting guidance may include the need to protect key infrastructure collateral damage IO implications higher HQ guidance ROE host-nation restrictions g Key Targeting Planning Elements The mission statement JFC’s intent statement and the CONOPS are key planning elements that result from mission analysis operational design and the JOPP Joint targeting ultimately must fully support these key JOPP elements 1 Mission Statement The mission statement should be a short sentence or paragraph that describes the organization’s essential task or tasks and purpose — a clear statement of the action to be taken and the reason for doing so 2 Initial intent statement The JFC’s initial intent statement is a concise expression of the purpose of the operation and the desired end state It may also include the JFC’s assessment of the adversary commander’s intent and an assessment of where and how much risk is acceptable during the operation 3 Concept of Operations The CONOPS describes how the actions of the joint force components and supporting organizations will be integrated 103 synchronized and phased to accomplish the mission including potential branches and sequels h Strategy Identification The OPLAN communicates the JFC’s strategy While designed to maximize the efficient use of joint force the plan must balance efficiency against competing factors such as political restraints ROE and higher level guidance A JFCs plan is not developed in a vacuum but each component’s planning efforts are closely integrated to support the overall strategy i Targeting Based on Desired Effect During the targeting process planners determine what specific targets or target sets must be detected and attacked while specifying the desired effects for each The desired effects asset capability and environment are some of the criteria used among other considerations to determine the targeting ways and means 104 Table III-3 Targeting Effects Definitions 1 The desired effects to be created from joint fires are typically stated as descriptive action terms outlined in Table III-2 Targeting Effects Definitions 2 Example of common targeting effects used in objectives 105 a Disrupt JFLCC targeting objectives may include “disrupt the C2 capability of the X corps’ reserve from D xx to D yy to degrade their ability to displace forward and reinforce success in the main attack ” b Delay The JFC may want to slow down the arrival of enemy reinforcements or exploitation forces A component commander’s targeting objective might be to “delay southward movement and arrival of enemy division xx at the main battle area for 48 hours to permit coalition corps xxx to establish an area defense ” c Divert The JFC may want to divert the enemy from one possible avenue of approach or mobility corridor to a less favorable one This interrupts the enemy commander’s operational tempo forcing him from his intended COA For example “divert enemy division xx eastward into location yy to prevent it from linking up with its parent corps until D xx ” d Destroy As a targeting objective a component commander might want to destroy a target to deny an enemy commander specific capabilities on the battlefield For example “destroy IADSs threatening JFACC high value airborne assets not later than NLT D xx to allow forward deployment ” j Operational limitations are actions required or prohibited by higher authority and other restrictions that limit the commander’s freedom of action such as diplomatic agreements political and economic conditions in affected countries and host-nation issues Commanders must examine the operational limitations imposed on them understand their impacts and develop options that minimize these impacts to promote maximum freedom of action during execution Many operational limitations are commonly expressed as ROE 1 A constraint is a requirement placed on the command by a higher command that dictates an action thus restricting freedom of action For example General Eisenhower was required to liberate Paris instead of bypassing it during the 1944 campaign in France 2 A restraint is a requirement placed on the command by a higher command that prohibits an action thus restricting freedom of action For example General MacArthur was prohibited from striking Chinese targets north of the Yalu River during the Korean War k Assessment Metrics Targeting is an iterative process where the results of assessment feed into the next planning phase Although assessment is the final phase of the targeting cycle assessment measures and indicators are selected early in planning When determining assessment metrics planners must remember commanders are most interested in patterns the changes to attributes of a system node link task or action 106 1 A measure is a data point that depicts the degree to which an entity possesses an attribute — expressed by a unit of measurement 2 A metric is two or more measures and shows a trend It reveals whether an attribute is more prevalent or less prevalent at various times Metrics are specifically designed to show change over time and are most applicable to assessing the effects on systems nodes and links 3 An indicator is a metric that can be compared to a standard or threshold It shows a trend relative to a predetermined standard These thresholds can be minimums maximums or both Unlike measures and metrics indicators give commanders a sense of whether they are making progress But determining relevant thresholds is often not knowable until sufficient measurement has taken place to show a pattern or trend especially when assessing human behavior 4 The staff should develop metrics to determine if operations are properly linked to the JFC’s overall strategy and the larger hierarchy of operational and national objectives These metrics evaluate the results achieved during joint operations During target development personnel should develop metrics for each specific target These metrics should indicate the intended effects s on the target as a result of actions s against it These metrics may be refined during the weaponeering process as the choice of weapons fuzes and delivery tactics may further influence effects These metrics should be posted in an electronic target folder ETF 5 Metrics can either be objective using sensors or personnel to directly observe damage inflicted or subjective using indirect means to ascertain results depending on the metric applied to either the objective or task Both qualitative and quantitative metrics should be used to avoid unsound or distorted results Metrics can either be inductive directly observing the OE and building SA cumulatively or deductive extrapolated from what was previously known of the adversary and OE Success is measured by indications that the effects created are influencing enemy friendly or neutral activity in desired ways among various target systems 6 Characteristics of Metrics Assessment metrics should be relevant measurable responsive and resourced so there is no false impression of task or objective accomplishment a Relevant MOPs and MOEs should be relevant to the task effect operation the OE the desired end state and the commander’s CCIRs decisions This criterion helps avoid collecting and analyzing information that is of no value to a specific operation It also helps ensure efficiency by eliminating redundant efforts 107 b Measurable Assessment measures should have qualitative or quantitative standards they can be measured against To effectively measure change a baseline measurement should be established prior to execution to facilitate accurate assessment throughout the operation c Responsive Assessment processes should detect situation changes quickly enough to enable effective response by the staff and timely decisions by the commander The staffs at all levels should consider the time required for an action or actions to produce desired results within the OE and develop indicators that can respond accordingly Many actions require time to implement and may take even longer to produce a measurable result d Resourced To be effective assessment must be adequately resourced Staffs should ensure resource requirements for data collection efforts and analysis are built into plans and monitored Effective assessment planning can help avoid duplication of tasks and unnecessary actions thereby preserving combat power 5 Measurement Types MOPs and MOEs are used to evaluate progress toward task accomplishment effects creation and objective achievement Well-devised measures can help the commanders and staffs understand the causal relationship between specific tasks and desired effects a Measure of Performance MOPs are generally quantitative but also can apply qualitative attributes to task accomplishment MOPs are used in most aspects of CA since it typically seeks specific quantitative data or a direct observation of an event to determine accomplishment of tactical tasks But MOPs have relevance for non-combat operations as well e g tons of relief supplies delivered or noncombatants evacuated MOPs also can be used to measure operational and strategic tasks but will typically be broader that at the tactical level 108 1 MOPs help answer questions such as “Was the action taken Were the tasks completed to standard or How much effort was involved ” Regardless of whether there was or was not a tactical immediate effect did the assigned force execute the “fires ” “maneuver ” or “information” actions as required by the specified or implied task MOPs could be used by the commander to assess whether his directives were executed by subordinate units as intended or if the units were capable of completing the specified action Typical measures might include whether or not the designated unit delivered the correct ordnance on a target occupied the town or dropped the right psychological operations pamphlets etc Another example could be “Did the leaflet drop take more or less than the expected number of sorties or Did the leaflets disperse in the appropriate pattern did they land in the proper location ” Similarly How quickly efficiently did we fill potholes in a particular neighborhood or provide potable water to the village 2 The MOP might ask “Were the weapons employed as intended on the planned target or did the expected physical or functional damage occur ” For example a task statement might read “4th Brigade Combat Team BCT neutralize target during the period time frame in order to purpose ” The MOP might include time to accomplish TOT or NLT D 1 physical damage required in quantifiable numbers destroy x percent or specific number and functional damage required on target 3 Measurement of combat tasks use MOPs supported by BDA measurements — usually based on physical evidence e g visual infrared or electronic of death injury disruption diversion delay dislocation denial degradation needs met support provided etc When selecting MOPs planners should consider the indicators and means required to collect against them and provide guidance in the collection plan These measures must be refined or amended during the tasking cycle as the tactical situation or the status of the target changes and are normally approved by the next higher HQ in the chain of command b Measure of Effectiveness These measures are typically more subjective than MOPs and can be crafted as either qualitative or quantitative As much as possible MOEs should be based on quantitative measures to minimize the possibility for error in subjective interpretation MOEs can be used to reflect a trend and show progress toward a measurable threshold 1 MOEs indicate progress toward attainment of each desired effect or indicate the avoidance of an undesired effect Some MOEs may be 109 direct forms of measurement like an eyewitness account of a bridge span being down some may be more circumstantial indicators such as measurements of traffic backed up behind a downed bridge 2 MOEs are typically more subjective than MOPs but can be crafted as either qualitative or quantitative indicators to reflect a trend as well as show progress relative to a measurable threshold For example if the desired effect is that Brown government forces withdraw from the cities the MOE could be stated as increase or decrease in level of forces in the cities Progress toward this effect can be measured readily with ISR ways and means However if the desired effect is that the Brown government engages the terrorists to leave the country a MOE such as increase or decrease in coercive content of diplomatic communiqués could be more difficult to track measure and interpret While MOEs may be harder to measure than MOPs for a discrete task they are nonetheless essential to the assessment construct c It should be noted there may be some tactical tasks that must be performed such as establishing logistic and communications infrastructure that are not directly linked to operational level tasks and effects However all operational-level effects will have assigned tasks and related MOE and MOP to help assess their attainment Likewise even though MOPs measure task accomplishment and will therefore fall within the realm of “Blue” activity MOEs will not necessarily be restricted to “Red” activity For example an operational- strategic-level objective of keeping the coalition together may have MOEs associated with it that are oriented on “Blue ” Likewise operational and strategic effects and objectives may have supporting MOEs that are focused on neutral entities Therefore for simplicity it can be generally stated MOPs fall within the realm of “Blue” activities but MOEs can exist in all areas The relationship between the tasked action and the targeted node is a start point in assessing attainment of effects More importantly if the tactical actions were correctly executed did they achieve the desired effects If an effect does not occur was it because the executed action did not happen or only partially happened or was the action insufficient or was it the wrong action in the first place 6 The assessment process uses MOPs to evaluate task performance at all levels of war and MOEs to determine progress of operations toward creating effects or achieving objectives Both MOEs and MOPs can be qualitative or quantitative measurements Whenever possible quantitative measurements are preferred because they are less susceptible to staff interpretation i e subjective judgment see Figure III-7 They demand more rigor proof and can be replicated over time even if the analysts and the users – the commanders – change For these quantitative measures to have maximum utility however they should have three common characteristics each 110 indicator must consist of at least one measure metric and a standard or threshold Figure III-4 Quantitative Measurement 7 The amount of quantitative data available to assess achievement of objectives is occasionally limited in which case the analysis must be conducted using qualitative sometimes subjective measures Qualitative means primarily that judgment must be made in the absence of meaningful quantitative measures see Table III-3 Notional Example of Qualitative Assessment Measures 111 Table III-5 Notional Example of Qualitative Assessment Measures 8 Military personnel tend to be less comfortable with qualitative than with quantitative measures because they are generally trained to regard their profession as more of a science than an art Pure quantitative data involved in quantitative measures however can deceive and can through their very seeming certainty take on a life of their own leading to actions that do not contribute to accomplishing objectives or the end state For example during Operation DESERT STORM strategic attack missions took down key nodes to deny power within the Iraqi electrical system This effect was accomplished with little destruction of Iraqi civilian electrical power infrastructure Nonetheless many power generator plants were destroyed later in the operation in part because traditional quantitative measurements of electrical capacity showed the Iraqis still had substantial usable resources This hampered civilian recovery following the operation This example also points out the importance of integrating assessment early into employment planning and target development efforts 9 When selecting assessment measures planners must identify the essential elements of information requiring collection If special ISR or other intelligence resources are needed guidance must be provided in the collection plan and the requirement must be added to the joint integrated prioritized collection list JIPCL Measures and indicators will be determined during mission analysis and should be provided in the JFC’s initial planning guidance however they must be refined or amended during staff estimates COA wargaming and as the tactical situation or the status of the target 112 changes Selection and refinement of assessment measures is an iterative process 3 Phase 2 – Target Development and Prioritization a Overview This phase of the JTC is comprised of three steps TSA entity-level target development and target list management TLM The target development process generates several products and lists as it progresses to include TSA ETFs and target lists and the end products directly support the succeeding phases of the JTC Target development is part of a larger intelligence planning effort and targeteers should understand the factors that lead to the initiation of target intelligence production Target development entails the systematic examination of potential target systems their components individual target entities and target elements to determine the necessary type and duration of action that must be exerted on each target to create the required effect s consistent with the commander’s objectives IO target development also follows this same general methodology identifying target systems components and their critical elements but uses a broader scope that accounts for information systems and psychological processes b Target System Research While targets for consideration come from a variety of sources the targeting process is reliant on the targeting tools of record i e the Joint Targeting Toolbox JTT application and the MIDB 1 Intelligence in MIDB is the foundational intelligence maintained in peace time and is readily available for additional refinement for targeting via the JTT interface as required The Defense Intelligence Agency DIA is the executive agent for the MIDB but the intelligence is maintained by 14 different commands The MIDB contains various data sets including traditional intelligence on installations facilities units and equipment and intelligence on non-traditional targets such as individuals organizations and virtual entities The MIDB also contains the targeting specific data sets such as target lists no strike lists joint desired points of impact JDPIs nonlethal reference points NLRPs and other targeting intelligence required to assist in weaponeering methods This allows planners the flexibility to quickly choose from a range of desired effects for various weaponeering options 2 Target system research within the tasking cycle often entails studying previously unidentified or un-located targets The JAOC IO element may also be crucial to target research especially in helping understand communications intelligence systems and human factors in the OE c Target Systems and Target Development 1 Target systems are typically a broad set of interrelated functionally associated components that generally produce a common output or have a shared task or mission and enable the adversary to conduct operations In all 113 cases target systems exist and operate in a complex “systems-of-systems” context with shared interrelationships and dependencies that may not be readily apparent or not conform to preconceived notions or biases 2 Target development is both an intelligence analytic and application effort As an analytic effort target development examines each aspect of the targeting taxonomy from the system level downward It identifies and describes adversary target systems the target system components related targets and associated target elements Target development begins after the receipt of the commander’s objectives and end state but will continue in Phase 3 Capabilities Analysis Phase 4 Commander’s Decision and Force Assignment and Phase 6 Targeting Assessment of the JTC The focus on continual target development in these phases will ensure the most current and accurate target intelligence is part of the commander’s decision process to execute against a particular target or targets 3 Target developers systematically examine the enemy utilizing the targeting taxonomy which hierarchically orders the adversary its capabilities and the targets which enable the capabilities into a clarifying framework see Figure III-8 Target Development Relationships Target Development Relationships 1 End State and Commander’s Objectives Taxonomy Product Adversary Joint Intelligence Preparation of the Operational Environment Target System 2 Target Development and Prioritization Target System Analysis Target System Component Target 3 Capability Analysis Target Element Electronic Target Folder Figure III-6 Target Development Relationships 4 Target development always approaches adversary capabilities from a systems perspective While a single target may be significant because of its own 114 characteristics the target’s real importance lies in its relationship to other targets within an operational system In many but not all cases the entities that comprise a target system also share a particular geographic association Examples of nation-state military target systems include ground naval and air forces Other examples of target systems that could support a nation-state’s military forces might include the electrical power petroleum oil and lubricant POL or transportation LOCs target systems Non-state actor target system examples could include violent extremist organization finance leadership or ideology target systems a Target system components are described as a related group of entities within a target system that perform or serve towards a similar function Examples include airfields as part of an air force bridges and roads as part of a transportation system or radio broadcast and newspapers as part of a mass media system see Figure III-9 Example Target System Components and Elements A non-state target system component example is the financial systems within a terror group finance target system Figure III-7 Example Target System Components and Elements b Targets are an entities or objects considered for possible engagement More specifically a lawful target is an entity that by its nature use location and purpose performs a function or functions for an adversary Targets usually fall into one of five target types facility individual virtual equipment or organization Examples include a POL or 115 electrical power facility a specific airfield or an individual that has been characterized as the chief accountant of a terrorist group See Figure III10 Example of Petroleum Oils and Lubricants Target System and Components for an example of POL target system components Figure III-8 Example of Petroleum Oils and Lubricants Target System and Components c Target elements are those specific features or objects that enable the target to function Example target elements of a POL facility could include refinery petroleum distillation units cracking towers and storage areas For an airfield elements could include runway s aircraft air 116 traffic control tower s and maintenance area s An element of an individual that is characterized as a terrorist group accountant could be an E-mail address or even a virtual persona 5 The following is a short explanation of the target development process a Target development begins with the creation of a planning requirement This is performed in the joint strategic capabilities plan via JOPP and results in a dynamic threat analysis b During planning targeteers will evaluate the objectives and the adversary COG as described in JIPOE for selection of target systems The purpose of this is to ensure target systems are logically and causally linked to the commander’s objectives and to ensure personnel resources are weighted towards the most relevant and valuable target systems c Next is TSA Performing TSA is the foundational process of system-level target development TSA is equally applicable to both nation-state and non-state actors The TSA process enables additional more detailed stages of target development d Entity-level target development builds on TSA and conceptually occurs in three stages Basic Intermediate and Advanced Each stage is defined by a minimum set of essential data required to progress a target from initial identification and functional characterization to execution-level detail e Once an entity has been identified as a potential target known as a target development nomination TDN an ETF should be started ETFs are used to store entity-level target intelligence operational planning and legal information f TDN entities are further developed and when intermediate target development and command quality control standards are met the entity is placed on a CTL Candidate targets will be submitted to the IC for vetting g Vetting assesses the accuracy of the supporting intelligence This includes verifying the candidate target’s functional characterization expectations statement and target significance as well as analyzing the target elements For effective and efficient vetting only one description and functional characterization of an entity can be presented to the IC h Once vetted candidate targets then go through validation Validation is a part of target development that ensures all vetted candidate targets meet the objectives and criteria outlined in the commander’s guidance and ensures compliance with the LOW and ROE Candidate targets go 117 through a target validation board or similar body to be validated then are added to a JTL or RTL i Depending on planning and operational considerations commands select targets from the JTL and or RTL and compile TNLs to nominate targets for engagement The TNLs are normally reviewed combined and prioritized at a JTCB Joint Effects Coordination Board JECB or at a similar review and approval session to form the JIPTL d Target System Analysis Target systems are analyzed through an open-ended analytic process called TSA utilizing all-source fused intelligence to choose potential targets that when engaged are most likely to create desired effects that contribute to achieving the commander’s objectives TSA is a process of identifying describing and evaluating the composition of an adversary target system and its components to determine its various functions capabilities requirements and vulnerabilities TSA is also the name given to those products that result from the TSA process TSA is further refined to exploit target system vulnerabilities e g target development at the entity level that weaken the adversary’s ability to engage in hostile operations 1 TSA also reveals the functional spatial geographic and temporal relationships among complementary target systems of the adversary being analyzed While joint forces have the latitude to develop and produce target studies on more narrowly focused aspects capabilities or features of target systems e g detailed target studies on specific adversary missile units special forces units weapons capabilities or C2 networks TSA products are intended to provide a comprehensive holistic assessment of the entire target system 2 When conducting TSA targeteers must be cognizant of the environmental conditions surrounding the target system Targeteers must understand an actor’s ability to influence and define its surrounding environment can also lead to suitable conditions that allow for safe havens material and personnel needs This understanding can lead to targeting strategies designed to either remove an ability to shape the environment or other strategies to change the basic environmental conditions to eliminate those that are favorable to the adversary Constraints of an environment can impact the ability to function effectively thereby creating identifiable critical vulnerabilities within the system While this is especially important when analyzing non-state actors it may also apply to nation states as well 3 The purpose of TSA is to identify targeting strategies that enable a JFC to use targeting to accomplish objectives and to identify HVTs and HPTs that underpin those strategies Targeteers should consider a target’s criticality and vulnerability when evaluating its value or payoff and how much its engagement will contribute to the targeting strategy See Table III-4 Factors in Target Selection 118 Table III-9 Factors in Target Selection a Criticality measures a target’s contribution to a target system’s larger function and its relative importance within the target system Target development focuses on identifying critical nodes within key target systems to achieve objectives and conform to JFC guidance There are four factors that measure a target’s criticality 1 Value measures the target’s importance to the adversary’s target system and to a friendly force’s ability to accomplish a mission or achieve an objective Significance is the degree of concern in excess of the value assigned to its normal performance This value measurement may reflect relative military economic political psychological informational environmental cultural or geographic importance Psychological significance assigned to a target reflects the thought processes of the adversary For example the birthplace of a political religious or cultural leader may hold greater psychological significance than its military value merits 2 Depth is a measure of the time between the disruption of a target’s activity and its measurable impact on system output Average depth is a time construct designed to measure the average interval between the time the production of an item begins and the time the finished product appears in use by a tactical unit Understanding the target’s depth provides the targeteer with an important measure of the time available for the adversary to organize substitute consumption alternate production or procurement before the system is functionally degraded 3 Recuperation is a measurement of the time and cost required for a target to regain its functional capability after being disrupted By assigning each target a reconstitution or recuperation time factor such as days required to rebuild the facility or perform the original function again the amount of target value restored each day can be estimated The target analyst can then determine the timing or necessity for a reattack 4 Capacity is measured in two ways current output and maximum output Current output may be represented by such things as plant production based on the present labor force economy of the country 119 current demand for the product and demonstrated production over the past two or three years Maximum output is an assessment of fullcapacity production based upon existing equipment and continuous operation over a 24-hour day b Vulnerability refers to the physical susceptibility to damage disruption intrusion influence or other desired effect Vulnerability helps determine the size and types of force required to damage or disrupt a target element in addition to munitions and fuzing requirements There are six characteristics that contribute to a target’s vulnerability 1 Cushion is a measure of the extent to which a single element or component can absorb a disruptive influence and continue to produce or provide the required product or service Viewed from another aspect cushion is that portion of the target that must be affected in order to achieve desired outcomes Determining this point for an industry or a military activity requires detailed analysis of a system’s operation including idle plant capacity replacement substitution and expansion capacity civilian production use production of nonessential military items or services and production or provision of substitute materials or services 2 Reserves provide a quantity of stored resources that may be use when the normal supply of the resource is disrupted Assessment of reserves depends upon the estimation of the system use or flow rate The measure of reserves is the percentage of the products used versus the total products available 3 Dispersion is the geographic distribution of either the components in a target system or target elements within a target complex An installation with a large number of dispersed elements presents a more difficult targeting problem than does a tightly concentrated installation Alternatively dispersion may degrade the adversary’s capabilities by making his own operations more complex 4 Mobility is a measure of the time required to shift a target’s activity from one location to another Mobility affects both location information perishability and friendly systems’ ability to detect locate identify and strike the target element 5 Countermeasures are a measure of an adversary’s ability to counter friendly systems attempt to disruptive activity of the target through active and passive means Effective use of terrain camouflage emission controls passive defenses caves and active defenses could negate the ability of the friendly system to exert an influence upon adversary activity 120 6 Physical Characteristics are analyzed to determine the target’s susceptibility to damage disruption or other effect They include such elements as weight shape volume construction and sturdiness c At the target component level different elements should be geospatially identified on the installation and documented in ETFs For example an airfield has many elements that are required to operate effectively such as personnel munitions runways operations areas ramps parking aprons hangars and maintenance areas It is also possible to assess the target’s vulnerability using this methodology The identification of links between target elements within a component allows the targeteer to more accurately define and highlight critical elements of a target which facilitates aimpoint selection Target element component set linkages desired effects objectives and commander’s guidance should be taken into account when highlighting critical aimpoints in the ETF ETFs built with clearly annotated critical elements will later allow for quicker JDPI and NLRP prioritization and selection in the weaponeering phase since critical JDPIs and NLRPs are already highlighted 4 Modeling The next step in target development is to build an analysis model that explains the relationship between target elements and facilitates identification of HPTs When preparing a model the targeting analyst must estimate each target element’s contribution to the overall activity to be affected or modified After the model is developed the analyst can then determine potential COAs for disrupting the desired component set or system 5 Identifying High-Value and High-Payoff Targets JFC components generate HVTs and HPTs as part of their normal targeting and target nomination processes a An HVT is a target the enemy commander requires for the successful completion of the mission The loss of HVTs would be expected to seriously degrade important enemy functions throughout the friendly commander’s area of interest HVTs are identified by the J-2 during deliberate planning during the COA analysis phase Once identified a list of HVTs is compiled and used by the J-3 and J-5 to identify HPTs b HPTs are targets that are considered crucial for success of friendly component commanders’ missions but are not JFC-approved TSTs HPTs are those HVTs that must be acquired and successfully attacked for the success of the friendly commander’s mission Time-sensitive and component-critical targets are usually special types of HPTs Component and JFC target development and priorities will focus on these targets to ensure success of the mission 121 c Identification of HPTs continues throughout execution and provides focus for JFC target development and prioritization Targets or target types identified as HPTs are included in operations directives and guidance on strike and assessment priorities The HPT list is a prioritized list of HPTs by phase of the joint operation The approved HPT list becomes a formal part of the fire support plan HPTs should be specifically identified in CA products Targeteers supporting the selection of HPTs must effectively communicate their rationale to the targets CA team Likewise due to the dynamic nature of the OE and numerous changes this can bring to the JIPTL targeteers need to work closely with planners to ensure all targeting priorities are continually clarified 6 Mobile Targets Target development of mobile targets suspected to be in a particular area such as mobile missiles or HVIs can identify the need for a geospatially-defined target area of interest TAI to help concentrate intelligence collection within the suspect area Named area of interest NAI with desired points of impact DPIs can be created within the TAI to speed target execution once PID of the target is completed 7 Information and Cyberspace Operations Considerations for Target Development a IO target development fundamentals do not differ from those of traditional target development The traditional methodology of identifying target systems sets components and their critical elements remains valid However many IRCs require long lead time for development of the JIPOE and release authority The J-2 identifies intelligence and information gaps shortfalls and priorities as part of the JIPOE process in the early stages of the JOPP This expansion of the traditional concept of target systems will require an increase in the quantity and fidelity of intelligence collection Likewise there is an additional requirement for specific technical and analytical expertise b Due to the potential for long lead times required to fulfill ICR’s target analysts must work to associate CO capabilities with potential target vulnerabilities and determine information gaps for those targets as early as possible Furthermore because of intense competition for scarce intelligence collection resources stove-piped intelligence operations must be minimized and full data sharing must be required among target analysts and planners c Effective TSA will discern all the dimensions of an adversary’s information systems and their inter-relationships System dimensions include human factors communications architecture network topology information flow and functionality among others Target intelligence specialists must seek to include these interrelated elements when analyzing processes systems to identify their critical elements 122 e Entity-Level Target Development Entity-level target development is the second step of the JTC phase 2 and builds on TSA It conceptually occurs in three stages basic intermediate and advanced Each stage is defined by a minimum set of essential data required to progress a target from initial identification and functional characterization to execution-level detail When these three stages are complete the entity can be considered a fully developed target Basic target development ensures the target has been uniquely identified Intermediate target development ensures the target is sufficiently developed enough to be vetted Advanced target development completes the target characterization process and defines the minimum information necessary to engage the target effectively Entity-level target development textual data for all target types is databased in the MIDB and accessed via interfaces of record such as JTT 1 Normally basic target development begins after intelligence research and TSA Basic target development can begin the process of identifying locating describing functionally characterizing and subsequently databasing entitylevel target details Basic target development analysis is required for all TDNs When complete basic target development will provide sufficient justification to assign the entity a unique entity identification EID alphanumeric string in approved national databases if one does not already exist See Figure III-11 Basic Target Development for the minimum basic target development requirements Figure III-10 Basic Target Development 2 Intermediate target development completes characterization requirements for Phase 2 Target Development and Prioritization of the JTC and ensures the entity qualifies as a candidate target and can be vetted The requirements for intermediate target development include the basic level requirements plus the following items found in Figure III-12 Intermediate Target Development 123 Figure III-11 Intermediate Target Development 3 Advanced target development completes the target characterization process and defines the minimum information necessary to engage the target effectively It normally occurs after a target has been validated by a target validation authority Advance target development includes target vulnerabilities identification weaponeering aimpoint selection and development and a collateral damage estimate In the event there are changes to target characteristics such as location physical makeup function etc it may also be necessary to refine or adjust advanced target development data throughout the remainder of the JTC up to and including during Phase 5 Mission Planning and Force Execution of the JTC 4 Once an entity has been identified as a potential target known as a TDN an ETF should be started ETFs are used to store entity-level target intelligence operational planning and legal information They are catalogued by an EID Target materials TMs may be presentations of target intelligence and are stored in ETFs TDNs are further developed and when intermediate target development and command quality control standards are met the entity is placed on a CTL The CTL subsequently drives further target development and TLM f Target Material Production TSA products include a list of potential targets and their associated ETFs These folders contain target information which includes validation data and approval messages along with any identified potential collateral damage concerns or collateral effects associated with the target ETFs should be continually updated as data is collected to reflect the most recent information regarding the target’s status An independent technical review of the compiled data helps to ensure mistakes do not proliferate through the rest of the targeting cycle CJCSI 3370 01 Target Development Standards contains detailed structure and content requirements for ETFs These normally include 124 1 Heading a Classification and Release b EID Number c Name d Function Cat Code as appropriate e O-suffix Facilities only f Location g Country Code h Original Production Date Last Update i Facility Description j Facility Significance 2 Target Summary Basic and Intermediate Target Development a Significance Statement Intermediate for Facilities b Target Description Intermediate c Functional Characterization Intermediate d Expectation Statement Intermediate e Critical Elements Description Intermediate f IGL Concern Statements Intermediate g Collateral Damage Considerations Intermediate h Source Documentation Basic and Intermediate 3 Supporting Materials Basic Intermediate and Advanced Target Development a Geospatial Intelligence GEOINT b Other 4 Capabilities Analysis Support Advanced Target Development a Target Vulnerability b Suggested Weaponeering c Aimpoint d Collateral Damage Estimate e Target Type Specialized Materials Analysis 5 Assessment a Physical damage change assessment b Collateral Damage Estimate c Functional damage change assessment d Munitions Effectiveness Assessment e Reattack Recommendation f Additional Collateral Effects Assessment 6 Associated Collocated a Units b Equipment c Facilities d Individuals Personnel 125 e Groups Organizations f Resources g Virtual 7 End State and Commander’s Objectives 8 Related Information g Target List Management TLM is the third step of the JTC Phase 2 and begins when a target is nominated for target development and ends with the creation and maintenance of a prioritized target list TLM includes target vetting validation listing nomination and prioritization 1 Once a TDN meets basic target development criteria it is entered into the MIDB at which point the joint force may track the TDN via a TDN list Because the MIDB is the DOD’s authoritative database of finished general military intelligence to include related targeting intelligence a TDN will be cataloged in the MIDB to standards 2 Upon completion of TDN review and the determination that the target is sufficiently developed the TDN can be considered a candidate target eligible for vetting and may be added to the CTL In the event the TDN does not pass the TDN Review it is not considered a candidate target and is returned to the nominator or developer as appropriate with detailed feedback on why it did not pass review 3 Target Vetting Vetting is an intelligence function that helps mitigate operational risk by assessing the accuracy of the supporting intelligence to establish a confidence level in the characterization of the candidate target Target vetting allows the joint force to engage the IC and other organizations’ SMEs to establish a reasonable level of confidence in the candidate target’s functional characterization based on a review of the ETF and supporting intelligence Note The importance of vetting cannot be overstated Commanders may choose to forgo vetting but this approach is not recommended and may significantly increase the commander’s operational risk a Eleven elements are required to submit an entity for vetting but vetting votes will be based on the following seven elements target identification target location target function target description functional characterization of the target critical elements and sourcing Agencies may identify considerations for target engagement restrictions by providing comments on target significance target expectation statement collateral damage considerations and intelligence gain loss concerns The decision to validate a target to the Joint Target List JTL or Restricted Target List RTL with specific restrictions is informed by these additional four elements 126 b Vetting is initiated when the joint force sends a vetting request to points of contacts in the IC The standard list of participating agencies will include the CIA DIA NGA and NSA The IC has limited capacity to vet targets so targets submitted for vetting should normally include those of greatest risk dual use weak sourcing etc Standard vetting requests will not exceed 20 targets per command within 10 working days Vetting agencies vote on the accuracy of the characterization of the target presented in the ETF within their intelligence discipline Vetting votes are not dependent on target engagement concerns The only four votes that can be cast are CONCUR CONCUR PARTIALLY NONCONCUR and NO REPORTING EXPERTISE Agencies will also identify any engagement concerns of the target within their intelligence discipline and flag them for the CCMD JFC to consider during prioritization effects and collateral damage processes by recording an additional response of NO CONCERNS or CONCERNS c Vetting responses must be recorded and associated with the target in the MIDB and linked to the ETF CIA DIA NGA and NSA will record their votes in the MIDB directly For agencies without MIDB access votes will be recorded by the joint force in the vetting remark in MIDB If vetting votes are not received in the allocated time the joint force will NOT record the missing vote as a “CONCUR” or as “NO REPORTING EXPERTISE ” The joint force will exercise due diligence in obtaining a vote If the joint force cannot obtain a vote from a vetting partner it will document all efforts to obtain a vetting vote and enter “NO VETTING RESPONSE WAS PROVIDED” by that agency This must be briefed to the commander or delegated target validation authority 4 Target Validation Target validation is a legal and operations function and JFC responsibility that ensures all vetted targets meet the objectives and criteria outlined in a commander’s guidance In addition target validation ensures whether attacking the target would be in compliance with LOW and ROE In bilateral or coalition environments targets must also be validated against allied concerns Target vetting and validation should be revisited as new intelligence becomes available or the situation changes Validation authorities vary and can include the JFC or delegated to a properly appointed flag officer typically the J-3 A legal advisor will make a recommendation to the target validation authority regarding the candidate target’s validity with respect to the LOW and ROE Ultimately the JFC is responsible for validating targets Validation results shall be documented in the MIDB g Target List Development Various target lists are created for use by the JFC Responsive and verifiable procedures must be in place for additions or deletions to the lists Commanders should be aware of the larger impact when individual targets are removed from the target list The removal of one seemingly isolated target may cause an entire target set to be invalid and require a different grouping 127 of target components to create the same effect Joint targeting has established the following target lists 1 Candidate Target List The CTL is a list of selected TDNs see Figure III13 Target Development Nomination and Prioritization which have met intermediate target development criteria and are submitted to the JFC for vetting and validation National agencies the JTF staff joint forces subordinate to the JFC supporting unified commands and components all submit TDNs to the JFC for inclusion on the CTL If a candidate target is not assessed as a valid military target it is removed from the CTL but not placed on the JTL or RTL There is no prescribed list on which to place the rejected candidate target However in certain cases the entity could go on the NSL 2 Joint Target List If a candidate target is assessed as a valid military target and there are no target engagement restrictions it is removed from the CTL and placed on the JTL of the appropriate plan The JTL is a dynamic database the JTF J-2 modifies this database to include periodic TDN inputs from national agencies CCMDs and assigned component forces In simpler terms what the JTL means to target development is it is a list of all the valid targets available for nomination for some type of action The JTL is not a component specific list these are targets available for any type of exploitation or attack lethal or nonlethal air ground or other delivery methods 3 Restricted Target List If the target validation authority decides there needs to be restrictions placed on the engagement of a valid target that target will be removed from the CTL and annotated with the specifics of the restriction in a Strike Restriction remark in the MIDB and placed on an RTL The nature of the restrictions placed upon a target can range from a nuanced limitation on when or how a target can be serviced to a specific prohibition on engaging the target due to operational political and or collateral damage concerns Regardless these restrictions do not change the fact targets on the RTL are valid military targets 4 Target Nomination List CCMD staffs and JTF components and subordinates select targets from the JTL and or RTL to compile their respective TNLs and forward them to the JFC The TNLs are then reviewed combined validated and prioritized at a JTCB JECB to form a draft JIPTL that is submitted to the JFC for approval Note the JFC may designate the JTCB as approval authority Targets are checked against the NSL at each successive level Component commanders must request the JFC or the JFC’s appointed representative review and approve RTL targets nominated to the JIPTL before execution 5 Joint Integrated Priority Target List The JIPTL is formed from consolidating and prioritizing the component TNLs based on prioritized JFC objectives 128 6 The JFC may also prohibit or restrict joint force attacks on specific targets entities or objects based on military risk LOW ROE or other considerations Targeting restrictions fall into two categories no strike and restricted a No Strike List The NSL is a list of objects or entities characterized as protected from the effects of military operations under LOW international law and or the ROE Attacking these entities may violate the LOW e g cultural and religious sites embassies belonging to noncombatant countries hospitals schools or interfere with friendly relations with other nations indigenous populations or governments The NSL is compiled independently of and in parallel to the CTL It is important to note however entities from the CTL may be moved to the NSL if as a result of additional target development vetting it is determined attacking them may violate the LOW Conversely entities placed on a NSL may be removed and become subject to military action if their status as a protected object or entity has changed NSLs are not target lists since the entities on the NSLs are not targets For additional information on no-strike entities and NSLs see CJCSI 3160 01 Series No Strike and the Collateral Damage Estimation Methodology b Restricted A restricted target is a valid target that has specific restrictions placed on the actions authorized against it due to operational considerations Actions that exceed specified restrictions are prohibited until coordinated and approved by the establishing HQ Attacking restricted targets may interfere with projected friendly operations Targets may have certain specific restrictions associated with them that should be clearly documented in the ETF for example day attack only strike only with a certain weapon etc When targets are restricted from lethal attacks commanders should consider nonlethal capabilities as a means to achieve or support the commander’s objectives However use of nonlethal capabilities in targeting should not be limited to the case where lethal capability use is restricted 7 Some targets may require special precautions such as chemical biological or nuclear facilities or targets in close proximity to no-strike targets When targets are restricted from lethal attacks targeteers should consider nonlethal capabilities as a means to achieve desired effects or support the objectives 129 Figure III-12 Target Development Nomination and Prioritization 130 h Prioritization All joint force components provide their respective priorities during the JIPTL development process Component priorities are reflected in their respective component prioritized target lists The JFC or JFACC approves target priorities at the JTCB JFC-designated approval authority has final approval for target prioritization The TET chief acts as the JFACC’s representative and maintains a JFC focus versus a more restricted air component focus when conducting TET duties if the JFACC has been delegated the JFC targeting approval authority Likewise the JFE if formed under the JTF J-3 coordinates and synchronized military fires for the JFC but the TET considers all aspects of the PMESII and takes the broader perspective Target prioritization must reflect JFC guidance and intent The JAOC typically uses the strategy-totask methodology to ensure each target on the JIPTL can be traced directly back to a JFC operational objective See Table III-5 Targeting Criticality Categories Table III-13 Targeting Criticality Categories i Target Nomination Component commanders national agencies supporting commands or the JFC staff submit prioritized target nominations via TNLs to the JFACC through their designated representatives in the JAOC Service or functional components identify specific target nominations and submit them in a variety of formats or utilizing MIDB replication The JAOC CPD then begins an early consideration of component nominations as candidates for ATO planning This facilitates early identification of long lead CRs conflicts duplication and prioritization issues See Table III-6 Example Target Nomination List for an example of a TNL 1 Copies of Service or functional component TNLs are submitted to the JFC’s designated representative usually within the JTF J-3 or JFE if formed for review at the same time they are sent to the JFACC JAOC 2 Component representatives at the JTCB also receive copies of their TNLs It is essential the component representatives at the JTCB are fully attuned to the priorities objectives and supporting rationale behind their commander's targeting efforts Failure to receive timely targeting information will result in 131 an inability of component representatives to properly represent their commander’s interest in the JTCB 3 The JFC J-3 staff representative often the JFE reviews all Service or functional component TNLs in preparation for each JTCB The JFE is focused at the JFC level and deals with coordination and synchronization of military fires The JFE then provides input to the TET for joint targeting and to the components for organic targeting 4 The TET also reviews the TNLs but is more broadly focused on the entire PMESII The TET takes input from the JFE then coordinates any remaining issues and develops the draft JIPTL for JTCB consideration The intent is to compare nominations with JFC target guidance and priorities to identify potential conflicts or problems before the JTCB meeting This speeds up the targeting process and keeps the JTCB from becoming bogged down in working detailed coordination 5 Unique target nominations outside of the process above must also be considered and are handled in the following manner a Special targets are often developed by higher HQ authority such as the President of the United States SecDef or the CCDR and forwarded to the JFC for JIPTL inclusion Mostly these special targets are critical HPTs of strategic military or political importance Special targeting and release authority for use of “national asset” weapons is normally controlled at the CCMD level b Components also submit HPTs that require “time-sensitive” treatment or dynamic targeting since they cannot wait for servicing through the deliberate targeting process such as targets that have become vital to their scheme of maneuver or immediately threaten to their forces c The JFC’s targeting representative also reviews a prioritized list of JFClevel target nominations and transmits them to the JFACC JAOC for inclusion by the TET in the recommended daily JIPTL 132 Table III-14 Example Target Nomination List j Draft Joint Integrated Prioritized Target List The draft JIPTL is a consolidated list of all TNLs and then prioritized based on JFC objectives Normally this is done by the TET in the JAOC The strategy guidance team must identify priority of critical tasks and time sequence factors related to critical tasks for inclusion in the AOD to provide initial prioritization of targets Each tactical task effect and objective is linked and prioritized to support the JFC’s operational effects and objectives Targets are initially prioritized by their 133 associated tactical task Targets must then be independently prioritized resulting in a draft JIPTL 1 Those compiling the draft JIPTL consider the estimated available capabilities and their ability to affect the targets on the list The list usually contains more targets than there are resources available to take action Thus a draft JIPTL “cut line” is usually established This “cut line” should reflect which targets will most likely have action taken against them for that ATO cycle This prioritized listing of targets with the projected “cut line ” is essential feedback for Services functional components as well as the JFC staff on how their specific target nominations do or do not fit into the creation of effects 2 It must be clearly understood the “cut line” simply reflects an estimate of resources available to take action against targets in priority order and does not guarantee that a specific target will be attacked Other variables like TSTs evolving JFC priorities and changing resource availability will determine which targets are ultimately serviced k Joint Integrated Prioritized Target List After the draft JIPTL is consolidated prioritized and deconflicted it must be approved by the JFC or designated representative before the component commanders can use it to prepare their plans and orders 1 Intelligence support to this process includes ensuring target information is complete and accurate targets are clearly related to objectives and the selection rationale is clear and detailed This may include specifying which targets must be serviced as integrated targets sets or individually the sequence and which pose potential collateral damage concerns see Table III7 Notional Joint Integrated Prioritized Target List 2 Not all targets on the JIPTL are fixed Although any component can nominate any type target the ground component typically nominates most mobile targets for attack during this process Ground component personnel do this by assigning a unit identification code to fielded forces they wish to target Using the BE number is not useful because that number is linked to a garrison location and the intent is to attack forces as they move in the OE The nomination of mobile targets should include desired effects and a predicted location usually in a Global Area Reference System GARS format Mobile targets will require location updates as they are tracked throughout the ATO cycle which include the most recent update time source of airborne sensors and further refinement of target location Even when the location of a target is not known 48 hours in advance the target development team can still nominate those targets for inclusion on the JIPTL A definitive aimpointservicing capability can be assigned to that target based on desired effects allowing a more accurate estimate of whether the target will make the list above the cut line If strategy development and TET processes are accurate 134 and supported with timely intelligence information the necessity to perform dynamic targeting in combat operations can be reduced Table III-15 Notional Joint Integrated Prioritized Target List 135 l Joint Integrated Prioritized Collection List 1 Determining collection and exploitation requirements throughout the targeting cycle steps is critical to creating efficiency and synergy in targeting efforts This effort attempts to answer the question “how will we know when we’ve created the desired effects or achieved the objectives ”Collection and exploitation requirements must be articulated as early as possible to support target development execution and assessment Targeteers must work closely with collection managers CMs to ensure target development and pre-strike post-strike and tasking change requirements are integrated into the collection plan Properly identifying collection and exploitation requirements is one of the keys to effective JIPOE The product of this step should be a JIPCL 2 The JIPCL is a prioritized list of intelligence collection and exploitation requirements needed to support I W analysis future target development efforts and to measure creation of desired effects and achievement of objectives The ISR operations team uses the JIPTL and other CRs to produce the JFACC’s component prioritized collection list CPCL JFC CMs consolidate all component CPCLs into the JIPCL which is approved at the joint collection management board JCMB An approved JIPCL is a useful product for answering information gaps as well as the collection and exploitation requirements stage of target development To ensure synchronization between the JIPCL and JIPTL ISR operations personnel and targeteers coordinate the parallel processes 4 Phase 3 – Capabilities Analysis a Overview This phase of the JTC involves evaluating available capabilities against targets’ critical elements to determine the appropriate options available to the commander for target engagement while highlighting the best possible solution under given circumstances Commanders also consider risks to the force and collateral concerns in evaluating available capabilities Estimates of required weapons or capabilities shape other planning considerations within the joint force For example weapons requirements will drive significant portions of theater logistic planning efforts The primary purpose of capabilities analysis is to maximize the employment efficiency of forces through application of enough force to create the desired effects while minimizing collateral damage and waste of resources 1 During the capabilities analysis phase the weaponeer estimates the most likely outcome resulting from employing selected capabilities against a specific target element to create a specific effect These estimates may be generated using mathematical models e g Joint Munitions Effectiveness Manuals JMEMs that take into account the target’s critical vulnerabilities performance data on the weapons contemplated for application against the target and means of delivery The weaponeer focuses on the target’s physical functional cognitive and environmental characteristics to determine how to leverage vulnerabilities Nonlethal capabilities should be considered as part of 136 this analysis Effects estimates should also take into account estimated repair and recuperation times when matching capabilities with vulnerabilities An account for reuse and reconstruction during later planning phases should also be included to avoid negatively affecting the end state 2 All estimates generated during this phase are situation-specific reflecting the pairing of forces against targets under particular conditions of employment As such users of this information are cautioned against assuming the estimated effectiveness of a force capability under one set of circumstances is broadly applicable to other circumstances Relatively minor targeting variations may have a significant unintended impact on effects estimates It is equally important to stress these estimates of performance are not designed to take into account considerations outside the realm of asset target interaction ATI e g they do not address whether or not the delivery system will survive to reach the target Estimates of consequences only consider the first order effects of ATI and do not model higher-order desired effects or unintended collateral effects 3 The capabilities analysis phase is also referred to in the air tasking cycle as the weaponeering allocation phase Although weaponeering is primarily an operational level function as performed during the joint targeting process it may also be performed at the strategic and tactical levels of warfare 4 The IC including federated partners plays a role in capabilities analysis by ensuring the TMs they provide include the estimative analyses required to make valid assessments The intelligence provided in this phase is also used to refine CRs b Capabilities analysis is comprised of four steps outlined below 1 Target Vulnerability Analysis Building on the critical target elements identified in Phase 2 target vulnerability analysis reveals all aspects of the target that if engaged would result in a reduction in the target’s ability to perform its function for the adversary 2 Capabilities Assignment Once a target’s vulnerabilities are known appropriate target engagement capabilities are assigned Target engagement capabilities may be either lethal or nonlethal weapons or capabilities All target engagement types must be accounted for in capabilities analysis Weaponeering is accomplished in this step for all lethal capabilities and some nonlethal capabilities from other mission areas i e technical capabilities such as space EW and cyberspace capabilities Once capabilities are assigned to vulnerabilities a list of these ATIs is created and evaluated in the next step 3 Feasibility Assessment Each of the ATIs must be evaluated for feasibility For example a lethal weapon might be able to neutralize a particular target’s function but because the target is located in a country for which we have no 137 lethal authorities and would not receive approval for this ATI would be “unfeasible ” 4 Effects Estimate Each feasible ATI should have first- second- and higherorder effects identified Sometimes this is done by a command’s red team Collateral damage is a second order effect CDE is a process normally performed by trained and certified personnel at various echelons CDE is intended to characterize the level and extent of collateral damage risk for a commander Higher-order effects may include such actions as diplomatic and public relations consequences arising from collateral damage or the potential for post-hostility economic costs to restore damaged adversary infrastructure Attrition calculations may be included in this step These effects estimates are essential in gaining the JFC’s approval in Phase 4 Commander’s Decision And Force Assignment c Weaponeering Weaponeering is the process of determining the quantity of a specific type of lethal or nonlethal means required to create a desired effect on a given target Weaponeering considers such things as target vulnerability enemy actions the effects of actions and countermeasures weapon characteristics and effects munition delivery errors and accuracy damage mechanism and criteria probability of kill weapon reliability and trajectory While keeping the JFC’s objectives desired effects tasks and guidance in mind the JTL JIPTL targeting objectives and targeting effects provide the basis for weaponeering assessment activities Weaponeering is conducted in the third phase of the JTC but it is embedded into target development force selection and execution planning It is a core competency of targeting although many confuse targeting with weaponeering Targeteers quantify the expected results of lethal and non-lethal weapons employment against prioritized targets to produce desired effects Since time constraints may preclude calculations of potential effects against all targets calculations should proceed in a prioritized fashion that mirrors the target list 1 The Services Joint Technical Coordinating Group for Munitions Effectiveness JTCG ME DIA Joint Warfare Analysis Center JWAC and the Defense Threat Reduction Agency DTRA have developed a number of quantitative techniques used to estimate weapons effectiveness and collateral damage risk The JTCG ME develops analytical methods for measuring and predicting weapons munitions effectiveness Weapons effectiveness is a statistical estimate of the results expected from specific munitions effects target environment damage criteria delivery accuracy munitions reliability and ballistics This should be closely tied to MEA in CA The JTCG ME also produces a large body of scientifically valid data related to specific weapons munitions and appropriate targets It results in probable outcomes given many replications of an event It does not predict the outcome of every munition delivery but represents statistical averages based on modeling weapons tests and data collected from the execution of real-world operations With modern precision and near-precision weapons however the probabilities of accurate delivery and achieving intended direct effects are very high and are still 138 improving The JTCG ME devised mathematical models which enable weaponeers to predict the effectiveness of weapons against most significant targets Inputs to these methodologies include factors such as target characteristics size shape and hardness and delivery parameters altitude speed dive angle etc Model outputs include the amount of force required to achieve specified damage levels in terms of stated damage criteria which provides weapons effectiveness comparisons 2 Weaponeering is normally done by the ISRD targeting team prior to TET using methodologies prepared by the JTCG ME and data found in the JMEM The final weaponeering is chosen during the MAAP development The output of weaponeering is a recommendation of the quantity type and mix of lethal and nonlethal weapons needed to achieve desired targeting effects while avoiding unacceptable collateral damage 3 Targeteers must know the capabilities and availability of platforms weapons and fuzes for kinetic weapons They must also be familiar with the standard conventional load for platforms operating in their OA and their delivery tactics Weaponeering results will only be useful if the employment parameters assumed in the weaponeering process match those used in execution Targeteers should work closely with the operations logistic staff and LNOs to obtain required information As a rule of thumb theater component targeting branches should request a copy of the time-phased force and deployment data to obtain units’ expected input options selected from the JMEM’s automated programs to provide realistic planning data Weaponeering must also take into account the availability of the various weapons being considered Certain high-value weapons such as those capable of deep penetration or other special effects are normally limited in number and should only be used against those targets that both require the weapon for successful attack and are of sufficiently high priority to warrant the expenditure of the resource Making these decisions is part of “target allocation ” Finally some weapons particularly certain IO capabilities must be thought about early and included in the estimate process due to the requirement for long lead time in planning deployment and approval 4 The weaponeering process is broken down into several general steps and is not tied to a specific methodology or organization Because all of the steps are not rigid and may be accomplished in different order or combined the weaponeer may use the following steps offered by JTCG ME as a guide a Step 1 – Obtain needed target data b Step 2 – Determine an appropriate desired effect c Step 3 – Determine desired probability of damage PD d Step 4 – Determine available aircraft ordnance tactics to be evaluated 139 e Step 5 – Evaluate optimize and validate weapons effectiveness f Step 6 – Prepare and present documentation and recommendation g Step 7 – Review Collection Requirements CRs Although not included as a general step in the weaponeering process it is important for the targeting analyst to review the CRs to determine if they are adequate or will need modification New requirements or changes in priority must be submitted immediately Keeping track of CRs keeping requirements current and synchronizing collection efforts are ongoing critical tasks For additional information on the weaponeering process see Joint Munitions Effectiveness Manual Weaponeering System JWS d Collateral Damage Estimation CDE begins in the target development phase and continues through execution CJCSI 3160 01 Series No-Strike and Collateral Damage Estimation Methodology details a specific DOD-wide collateral damage methodology CDM Targets with associated collateral damage concerns that are expected to exceed theater CCMD thresholds are referred either to the SecDef or President using the STAR process detailed in CJCSI 3122 06 Series Sensitive Target Approval and Review STAR Process Classified 1 DOD policy requires the US military to comply with the principles and spirit of the LOW during all operations unless otherwise directed by competent authorities The LOW requires combatants to refrain from intentionally targeting civilian or noncombatant populations or facilities In accordance with the LOW the anticipated injury or loss of civilian or noncombatant life damage to civilian or noncombatant property incidental to attacks collateral damage must not be excessive in relation to the military advantage expected to be gained Failure to observe these obligations could result in excessive impacts on civilians and noncombatants and be considered a LOW violation This situation could subject the US leadership and military to global criticism -- potentially adversely impacting assigned military missions and national goals 140 2 The CDM is a simple and repeatable process that encompasses the joint standards methods techniques and processes for a commander to conduct CDE and mitigate unintended or incidental damage or injury to civilian or noncombatant persons or property or the environment It assists commanders in weighing risk against military necessity and in evaluating proportionality within the framework of the JOPP In short the CDM is a means for a commander to adhere to the LOW These joint standards and methods for conducting CDE apply across the range of military operations In addition the CDEs that result from the CDM are meant to inform decision makers and commanders and are not decisions themselves The CDM assists senior leaders to evaluate collateral risk against military necessity during the planning and execution of combat operations 3 The framework of the CDM is built around five mutually dependent CDE levels CDE Levels 1 through 5 that supports the employment of conventional munitions across the range of military operations Each level is based on a progressively refined analysis of weapon effects the physical environment target characteristics and delivery scenarios with specific risk thresholds established for each of the five CDE levels As the CDM moves through the CDE levels the level of analysis and risk the commander accepts increases as do restrictions placed on the weapon’s delivery It is important to understand that the CDM and the products derived from CDE are not the only input to a commander's decision making Operational objectives end-state considerations LOW ROE target characteristics risk to friendly forces and strategic risk are examples of the many factors that contribute to a commander's decision making These factors either alone or in combination may outweigh the value of the CDM input a CDE Level 1 Intitial Analysis Is the most important and complex step in the CDM The information gained during CDE Level 1 is required to accomplish the remaining steps of the methodology Level 1 evaluates the target's functionality for dual-use concerns identifies potential CBR plume and environmental hazards and identifies all collateral objects within the CDE Level 1 CER resultant CHA This step reveals those targets or collateral objects that may represent areas of strategic risk and therefore may also have to be evaluated via the STAR process b CDE Level 2 PGM General Analysis Begins the process of analyzing weaponeering options that mitigate the potential for collateral damage A single distinct analytical process for the PGM weapon class is employed within Level 2 CDE Level 2 PGM General Analysis is a means to estimate risk of collateral damage while enabling maximum tactical flexibility limiting the restrictions on target engagement to either Unitary or Cluster PGMs 141 c CDE Level 3 Weaponeering Analysis Begins the process of refining weaponeering options that both create the desired effect on the target and mitigate collateral damage The goal of CDE Level 3 is to achieve a low collateral damage estimate while limiting the number of tactical weaponeering restrictions Considering the weapon class and system delivery platform and or PGM warhead type decisions from CDE Level 2 CDE Level 3 determines appropriate delivery systems warhead and fuze combinations that mitigate the risk of collateral damage while still creating the desired effect on the target d CDE Level 4 Refined Analysis Completes the process of defining weaponeering solutions that create the desired effect on the target and mitigate the potential for collateral damage e CDE Level 5 Casualty Analysis Is necessary when Levels 1 through 4 are insufficient for making a CDE low call CDE Level 5 is also required when Level 1 analysis determines the presence of involuntary unwitting or status unknown human shields at the target the target is a dual-use target the target is a CBR hazard target or collateral concern that connot be mitigated or an environmental hazard target or collateral concern that cannot be mitigated There are other unique situations that may elevate an attack to CDE Level 5 as well At CDE Level 5 civilian or noncombatant casualties are expected and commanders must be aware they are assuming significant risk of collateral damage when engaging a target analyzed under CDE Level 5 For additional information see CJCSI 3160 01Series No-Strike and Collateral Damage Estimation Methodology e CJCSI 3122 06B Sensitive Target Approval and Review STAR Process Classified provides guidance for the CCMDs for designating sensitive targets and nominating them for national-level review The STAR process supports contingency and CAP STAR products which usually consist of a briefing slide or series of slides are used to present sensitive targets for national-level review CJCSI 3122 06 Series provides examples of STAR products but does not require a certain format because STAR products may vary by CCMD and planning effort The CDM outlined in CJCSI 3160 01 Series supports the STAR process by assessing and identifying collateral damage related to sensitive targets The material used to determine the CDE will form the basis of the STAR products dealing with collateral damage For additional information see CJCSI 3122 06 Series Sensitive Target Approval and Review STAR Process Classified 5 Phase 4 – Commander’s Decision and Force Assignment 142 a Overview The force assignment process integrates previous phases of joint targeting and fuses capabilities analysis with available forces sensors and weapons systems It is primarily an operations function but requires considerable intelligence support to ensure ISR assets are properly integrated into the plan The process of resourcing JIPTL targets with available forces or systems and ISR assets lies at the heart of force assignment Once the JFC has approved the JIPTL either entirely or in part tasking orders are prepared and released to the executing components and forces The JTC facilitates the publication of tasking orders by providing amplifying information necessary for detailed tactical-level planning of operations 1 During any current operation the joint targeting process also documents the logical linkage between tasks effects objectives and guidance This documentation traces the analytical reasoning that supported the nominated targets and the details of the capability effectiveness estimates The work of mission planners is significantly enhanced when they are furnished with detailed insights into the reasoning that resulted in their unit tasking Furthermore because the pairings of capabilities against targets are made using nominal weapon and weapon system performance data there may be divergences with more current and or specific data used by unit-level planners Making the factors used in joint force assignment available to the mission planners and providing them real-time collaboration capability with other targeting specialists enables adjustment and fine-tuning of mission planning It also provides a channel to discuss the mitigation of risk for the attacking force since variations in tactics may be required that could affect the results created at the target The joint targeting process must account for these variations and adjust expectations accordingly This is a critical path of information flow during execution that reduces the likelihood of confusion between joint force assignment expectations and actual achievement Ultimately the exchange of information during Phase 4 and the reconciliation of a COP are critical elements during Phase 6 of the JTC where outcomes are analyzed and future actions are determined 2 Targeteers work closely with planners to balance the available employment options with their expected effects The targeteers’ recommendations should reflect an objective assessment of the most appropriate capability to create the effect required to meet the commander’s objective no matter the source During force assignment targeteers also provide updated target status effectiveness analysis and collateral damage estimates 3 At the component JFACC level weaponeering information is used to analyze force selection to determine the likely impact on a target element's physical and functional capability For lethal force this is based on PD and probability of arrival for a weapon system For nonlethal force this is based on expected effects 143 b Five general steps in force assignment are described in the following paragraphs 1 Consolidate Target Development and Capabilities Analysis Results In this step targeting personnel assemble the necessary data from the work done in Phases 2 and 3 To make this complex data more useful to their operations counterparts the targeting personnel must prepare summary files with worksheets on pertinent information collected on each potential target Target files should contain four types of information target development data capabilities analysis or number of assets required CDE and attrition calculations a Target Development Data The process of target development produces extensive detailed target folders and supporting products for each target on the JIPTL While crucial for the overall JTC this mass of detail may very quickly overwhelm the force assignment team unless distilled down into a summary containing only the essential information needed to perform the force assignment function To condense the material targeteers prepare target briefs summarizing the contents of the target folder Mandatory information includes all information necessary for the JFC to decide how the target’s engagement contributes to the JFC’s objectives For additional information on ETF structure and contents see CJCSI 3370 01 Target Development Standards Appendix A to Enclosure E b Capabilities Analysis During capabilities analysis estimates on weapons effects and damage criteria are typically arrayed using the following factors forces delivery systems weapons fuzing reliability and delivery parameters arrival conditions The results from the capabilities analysis provide multiple calculations which estimate the physical damage resulting from planned actions against the target Targeting personnel may also provide the projected effects of nonlethal applications on the target The force assignment team will normally require several possible weaponeering solutions for each JDPI or on each target arranged in order of effectiveness c Collateral Damage Estimation Every target where a weaponeering solution was determined should also have an estimate of the projected collateral damage resulting from each anticipated weapon type Estimates should reflect the collateral damage projected to occur from the use of the weapons required to create the desired effects When presented alongside weaponeering results CDE facilitates the commander’s application of the LOW principle of proportionality and provides a mechanism to highlight strategic risk due to collateral damage 144 d Attrition Calculations Intelligence analysts provide data on the enemy defensive posture capabilities and intentions Working with planners weaponeers run attrition models to estimate the probability of the weapon system arriving at the target and include probability of release or probability of arrival Other factors include maintenance failure adversary defenses and weather Weaponeers should factor any attrition analysis and probability of release or probability of arrival data into their PD calculations 2 Assemble Data on Friendly Force Status Factoring in Operational Limitations and Apportionment Guidance Planners and their logistics counterparts assemble data on the current status and availability of friendly forces and munitions The JFC approves specific apportionment guidance describing the division of military effort among the different missions Apportionment affects how the force assignment team tasks dual- or multirole platforms sequences force activities and directs force packages to operate in different parts of the OA Other issues affecting force assignment include the maintenance status of combat and support assets battle damage to equipment from previous missions operator and munitions availability and location of stockpiles relative to combat assets However simply knowing what forces are available does not give the complete operational picture Planners should consider weather adversary operations force protection concerns OE management issues LOW ROE and SPINS constraints Packaging timing issues OAs required support assets e g availability of air-refueling aircraft for aerial missions and other considerations also affect which targets can be acted against 3 Assigning Forces to Specific Targets and Supporting Missions In this step planners assign forces munitions nonlethal capabilities and ISR assets to specific targets and aimpoints They develop force packages assign supporting assets and resolve timing sequencing and deconfliction issues Operational limitations may require modification to targeteers’ initial recommendations Timing event sequencing and interaction of combat forces with supporting assets become crucial in crafting an effective and actionable CONOPS and fire support plan The operational characteristics of a particular weapons system when tasked against a specific target may require adjustments to the overall plan or order Often targets are not attacked in the same priority order as they appear on the JIPTL Targeting personnel must be ready to assist in evaluating the impact of these changes upon the entire targeting effort As changes are made due to operational and special limitations such as collateral damage restrictions it is important to ensure achieving the commander’s objectives does not result in inadvertently violating existing constraints or restraints a Component commanders make air capabilities forces available to support the JFC’s mission and CONOPS These air capabilities forces are tasked by the JFACC based on the JFC’s approved air apportionment and 145 prioritization decision Only the JFC has the authority to reassign redirect or reallocate a component’s organic air capabilities forces b When a component does not have enough organic air capabilities forces to support their assigned mission the component will nominate targets for joint tasking c Component organic assets not under joint tasking should also appear on the ATO to enable coordination and minimize the risk of fratricide The inclusion of component organic air assets in the ATO does not imply any command or tasking authority over them nor does it restrict component commanders’ flexibility to respond to OE dynamics Component organic air capabilities forces though not available for joint air tasking must still comply with the established ROE ACP ACO area air defense plan and SPINS 4 Present Joint Targeting Recommendations to the Joint Force Commander for Approval The commander’s decision in Phase 4 is to either approve the draft JIPTL approve targets to be added to or removed from the JIPTL or approve a particular way or ways of engaging a particular target or targets The force assignment team also prepares a comprehensive briefing on the recommended plan explaining the rationale behind the targeting decisions and target selection The plan is briefed to the JFC as part of the JTCB process Generally operations and intelligence staffs work together to produce and brief the recommended plan a Planners must inform the submitting component commander if a component-submitted HPT cannot be attacked targeting effect created or targeting objective achieved That component commander may modify the targeting effect or objective or accept the fact the targeting objective will not be achieved during this cycle b If necessary the component commander can seek modifications to operational objectives targeting guidance or prioritization from the JFC via the JTCB process to enable servicing of the submitted HPT 5 Issue Tasking Orders to Forces a Once the plan developed by the force assignments team is approved tasking orders to the assigned combat and support forces must be prepared and issued It is important to include tasking for intelligence organizations supporting mission planning and CA during this phase b Mission Statement The joint force staff translates the JFC’s operational planning guidance and approved COA into tasks to subordinate units contained in the CONOPS The JFACC SD does the same process at the JAOC for the JFACC level to develop the JAOP Tactical mission tasks 146 describe the results or targeting objectives and targeting effects the commander wants to achieve create – the what and why of a mission statement Thus a mission statement is a short sentence paragraph describing the unit’s task or tasks and purpose that clearly indicate the action s to be taken and the reason s for doing so The mission statement normally contains the elements of who what where why and when but seldom specifies how The how is normally defined in the CONOPS 1 The “who ” “where ” and “when” of the mission statement is straightforward The “what” and “why ” however are more challenging to write clearly and can be confusing to subordinates if not written well 2 The “what” in the mission statement is the tactical mission task to be accomplished “What” is typically expressed either in terms of an intended targeting effect e g block canalize defeat destroy or in terms of an action by a friendly force e g contain destroy isolate The commander and staff should carefully choose the term that best describes either the action to be taken by the friendly force or the commander’s intended targeting effect to be created 3 The “why” or purpose of a mission statement puts the task into context by describing the reason for performing the task The purpose is normally described using a descriptive phrase and is often more important than the task The following example includes a purpose in the mission statement “NLT 031100Z JUL 03 When 1st BCT Who secures What task OBJ BRAVO Where to prevent enemy forces from crossing the BLUE RIVER Why purpose ” 4 Normally the staff develops the task by adding the phrase “in order to” and then provides the task’s purpose “In order to” phrases might include “divert deny enable deceive prevent open envelop surprise cause protect allow create influence support etc ” 5 Task statements normally do not specify “how ” There may be occasions however where an activity e g raid ambush infiltrate provides a needed overarching doctrine of how to accomplish a task that will enhance clarity and provide context Here is an example of a mission task statement that includes an activity “At 211000Z Aug 2006 When 1st BCT Who infiltrates How activity to seize What task Objective BRAVO Where in order to prevent enemy forces from interfering with the rapid crossing of 3rd US Infantry Division over the Blue River Why purpose ” c Apportionment Apportionment is in the general sense the distribution for planning of limited resources among competing requirements Air apportionment is the determination and assignment of the total expected effort by percentage or 147 by priority that should be devoted to the various air operations for a given period of time The total resources made available to the JFACC are determined by the JFC in consultation with component commanders on the basis of assigned operational objectives effects and tasks in the CONOPS For example the JFC may determine counterair is the first priority for Phase 1 and should include 50 percent of the available air assets based on his intent for operations on those specific days His second and third priorities may be AI and CAS comprising 30 percent and 20 percent of the available air assets respectively 1 The air apportionment recommendation provided by the JFACC is a vital part of the joint air planning and tasking process Apportionment helps the JFC ensure the weight of the air effort is consistent with the operational objectives effects and tasks for each phase The apportionment percentages will vary throughout the operation depending on the enemy’s air ground and sea capabilities intentions and phasing of the OPLAN In determining apportionment the JFC will normally use one or more of the following methods to assign priority or percentages of effort a By geographic areas b Against assigned mission-type orders c Against target sets d By the type of fires e g strategic attack interdiction counterair maritime support CAS 2 Apportionment considerations may be discussed at JFC planning JTCB or JFACC TET meetings Component commanders or their designated representatives present the following at the meetings a Component concept s of operational maneuver supporting the JFC plan and intent This includes the component commander’s targeting objectives requirements including timing and coordinating instructions and the targets requested for attack b Associated general or specific HPTs that have been identified as critical to the components scheme of maneuver Note The component commander or designated representative must be the advocate for component nominated HPTs to ensure their inclusion in the JIPTL c Associated target priorities and timing of attack d Rationale for target designation priorities and desired targeting effects 148 3 The JFACC should determine how best to achieve targeting effects to meet the other component commander’s targeting objectives and recommend the necessary apportionment of JFACC-assigned forces capability to the JFC d Allocation After the JFC promulgates the apportionment decision the JFACC and staff conduct the allocation process There are two types of allocation relevant to the air tasking cycle 1 The first is “target allocation” and it starts early in the targeting process Prior to the TET target coordination meeting the MAAP team determines how many aimpoints can be serviced on the given ATO day from the MAAP team The TET then goes over the lists of nominated targets and determines which “make the cut” on that day’s proposed JIPTL The TET must work closely with the SD and the MAAP team to ensure the prioritized list ties into the JAOP and AOD appropriately The SD must ensure the TET understands how effects and objectives are prioritized how they are to be achieved over time and that it has a macro-level idea of the number of targets associated with each objective The TET then collects target nominations from other sources and works a daily allocation of targets that have been planned against the effects and objectives to build the daily JIPTL 2 The second type of allocation is “force allocation” or air allocation as it is customarily thought of This is the translation of the air apportionment decision into the total number of sorties or missions by weapon system type available for each operation or task Force allocation is the responsibility of the CPD MAAP team which takes the final prioritized list of weaponeered targets and allocates airpower by melding available capabilities and resources with the TET’s weaponeering recommendations Although not complete until the MAAP is produced force allocation starts early The result is a translation of the total weight of air effort into the total number or sorties or missions required to achieve desired effects 3 Allocation of aircraft and weapons must fulfill the JFC’s original targeting guidance and intent Aircraft or weapons should not be diverted to other targets unless unanticipated changes in the situation so dictate If diversions occur appropriate modifications to the ATO may be required to support the JFC’s apportionment decision and intent for subsequent phases of the operation e Master Air Attack Plan Development The MAAP is the JFACC’s time-phased air and space scheme of maneuver for a given ATO period The MAAP synthesizes commander’s guidance desired effects supported components’ schemes of maneuver friendly capabilities and allocates friendly resources against approved targets The MAAP is usually presented in the form of a decision briefing for the JFACC The CPD MAAP team is responsible for producing the MAAP 149 1 Allocation Request Message On the basis of the JFC’s apportionment decision internal requirements and air support request messages each air capable component sends an allocation request ALLOREQ message to the JFACC timed to coincide with the beginning of the MAAP part of the tasking process usually NLT 36 hours prior to the start of a given ATO day ALLOREQ messages contain the following information a Number of sorties by assigned mission and type aircraft to be flown during the air tasking day b Excess sorties not needed by the air capable component and available for tasking by the JFACC c Request for additional air support beyond the capability of the air capable component making the request 2 Sortie Allotment Message The JFACC reviews each component’s ALLOREQ and sends a sortie allotment message SORTIEALOT with JFC concurrence back to the components 12-18 hours before ATO day commences The SORTIEALOT informs commands which mission requests will be fulfilled and which will be delayed during that ATO cycle The SORTIEALOT confirms the ALLOREQ and provides general guidance for planning operations The SORTIEALOT contains three kinds of instructions a Revisions if any to the components planned allocation of sorties With JFC concurrence the SORTIEALOT could convey revisions or redirection of missions outside of the apportionment guidance b Approval or changes to the component requests and allotment of excess sorties c Revisions to mission data in component requests such as a changed mission priority or TOT Component liaison elements such as the BCD and the JFACC usually coordinate such revisions in advance 3 Master Air Attack Plan Team The MAAP team works with the TET to support JIPTL production Once the JIPTL is approved the MAAP team takes input from the TET component liaisons the JAOC AMD and others to produce the MAAP With the support of liaison representatives the MAAP team determines an overall sortie flow for the ATO period and determines how that flow should be divided into “packages ” Packages are discrete sets of missions and sorties designed to complement each other or provide required support for example tankers and EW assets “packaged” with the strike assets they are supporting The MAAP team also determines required TOT or time on station Packages are arranged in sequence and used to determine a timeline flow and resource requirements for the ATO period 150 Each package must be deconflicted in time space and effect The end result is a MAAP 4 Another part of the allocation and MAAP development portions of the tasking process is creation of an ISR and assessment plan Theater ISR assets must be carefully orchestrated to ensure optimal coverage of the OE ISR assets should be positioned to provide tactical assessment of targets planned for attack detect emerging targets and be flexible enough to collect against them as well At the same time ISR assets must continue to monitor the “bigger picture ” to help discern whether desired effects are being created and whether the enemy is adapting his COAs to our actions The assessment plan must be closely coordinated with all other planning efforts 5 Targeting personnel assist air operations planners in balancing expected effects with available employment options when supporting the force assignment process Their recommendations should reflect an objective assessment of the most appropriate capability to achieve the effect required to meet the targeting objective During this process targeting personnel provide current target status including BDA effectiveness analysis and collateral damage estimates 6 The JAOC should establish procedures to ensure organizations nominating targets receive continuous feedback on the status of their nominations throughout the tasking cycle For example not all nominated targets will be approved for inclusion in the JIPTL nor will all targets on the JIPTL be included on the ATO There must be a feedback mechanism to ensure targets not attacked for any reason are reported to the nominating authority for consideration for future submissions 7 Collection planning and target planning are consolidated in MAAP development to enable production of a comprehensive ATO SPINS ISR synchronization matrix etc Consolidation ensures the targets selected for inclusion in the ATO are matched with CRs for pre-strike verification as well as post-strike physical and functional assessment f Air Tasking Order Production After the MAAP development process is complete the ATO production process merges the ATO data with any inputs to SPINS communications notes and the ACO The consolidated orders are electronically transmitted to all users via the TBMCS 1 JFC and JFACC guidance the AOD target worksheets the MAAP and component requirements are used to finalize the ATO SPINS and ACO During execution of the operation detailed capabilities analysis at the tactical level is used to optimize weapons delivery parameters validate ordnance loads and support ongoing mission planning to support daily ATO cycles 151 2 Airspace control and AD instructions must be provided in sufficient detail to allow subordinates to plan and execute all missions listed in the ATO These are usually captured in the ACO and the day’s SPINS These instructions must facilitate combat operations without undue restrictions balancing combat effectiveness with the safe orderly and expeditious use of airspace Instructions must also provide for quick coordination of task assignment reassignment and must direct aircraft identification engagement procedures and ROE appropriate to the nature of the threat These instructions should also consider the volume of friendly air traffic friendly AD requirements identification friend or foe technology weather and adversary capabilities Instructions contained in the SPINS and the ACO are updated as frequently as required 3 The ATO ACO and SPINS provide operational and tactical direction at appropriate levels of detail The level of detail should be very explicit when forces operate from different bases and multi-component or composite missions are tasked By contrast less detail is required when missions are tasked to a single entity or base 6 Phase 5 – Mission Planning and Force Execution a Overview Upon receipt of tasking orders detailed planning must be performed for the execution of operations The joint targeting process supports this planning by providing planners with direct access to detailed information on the targets supported by the nominating component’s analytical reasoning that link the target with the desired effect Phase 2 This will provide the background information necessary for the warfighter to focus on the JFC’s objectives as the operation unfolds 1 Combat operations are dynamic During force execution the OE changes as a result of actions from the joint force adversary and other actors The joint targeting process monitors these changes in order to allow commanders to decisively use joint force capabilities to seize and maintain the initiative These dynamic changes require particular attention to PID CID and target validation 2 Target validation during this phase includes analysis of the situation to determine if planned targets still contribute to achieving operational objectives including changes to plans and objectives if targets are accurately located and how planned actions will impact on other friendly operations b Lessons learned from recent operations have demonstrated the need for a distinct focus on DT during Phase 5 Phases 1 through 4 of the JTC collectively produce targeting tasks products and the commander’s guidance for all targeting whether deliberate or dynamic 1 In coordination with joint components and other agencies the JFC and staff develop dynamic targeting guidance which should include both priorities for 152 dynamic targeting and identification of component requirements for dynamic targeting action at a minimum Guidance should also include TST criteria and procedures for component critical targets as well as guidance for acquisition and action against the targets The JFC should articulate risk tolerance sufficiently to let on-scene commanders understand his intent when DT requires accelerated coordination 2 DT has often been called F2T2EA or the “kill chain” and has also been used for specifically engaging TSTs see Figure III-14 Phase 5 Targeting Steps F2T2EA’s applicability extends to all targets whether developed during deliberate targeting or DT TOO have been the traditional focus of DT because decisions on whether and how to engage must be made quickly However planned targets are also covered during this phase but the steps simply confirm verify and validate previous decisions in some cases requiring changes or cancellation Figure III-16 Phase 5 Targeting Steps 3 The steps of DT may be accomplished iteratively or in parallel The find fix track and assess steps tend to be ISR-intensive while the target and engage steps are typically labor- force- and decision-making intensive 153 4 Dynamic is different from deliberate targeting in terms of time available but not much different in the substance of the steps Targets requiring immediate response may be fully anticipated and planned in advance as deliberate actions in the joint targeting process for execution by designated forces However if their nature precludes detailed advanced execution planning e g a mobile ballistic missile threat they may be initially identified during the deliberative analytical and planning phases of the JTC with appropriate advance ISR tasking Once detected they may then be prosecuted using dynamic targeting 5 The primary focus of dynamic targeting should be the prosecution of a Time-Sensitive Targets The JFC is ultimately responsible for TST prosecution and relies upon the component commanders for conducting TST operations b Component HPTs that are not TSTs but are considered crucial for success to friendly component commanders’ missions because of their fleeting nature or threat to friendly forces c Targets scheduled to be struck on the current ATO in execution but which have changed status in some way such as FSCM changes Also called “On-call Planned targets ” d TOOs and those emerging during execution that friendly commanders deem worthy of targeting 6 To avoid unnecessary diversion of assets from the overall plan it is important to limit the total number of targets designated as TSTs to only those meeting the definition in JP 3-60 Joint Targeting and JP 1-02 Department of Defense Dictionary of Military and Associated Terms – “A joint force commander validated target or set of targets requiring immediate response because it is a highly lucrative fleeting target of opportunity or it poses or will soon pose a danger to friendly forces ” It is also important to provide clear guidance to all levels of C2 and force application on what constitutes a TST or component HPT 7 In addition to TST guidance the JFC establishes specific guidance on how coordination deconfliction and synchronization will occur among functional Service components assigned in the OA The components use this guidance to establish planned and reactive procedures for attacking the prioritized TST and immediate targets Some examples of JFC guidance to facilitate TST prosecution include a Establish planned FSCMs with definable trigger events against specific TST and immediate targets 154 b For those targets that component commanders consider the component equivalent of a TST the applicable component commanders should coordinate relative priorities and establish guidance at the JTCB through the JFE or via other appropriate means c Designate TST and immediate target engagement authority based on the JFC OA assigned functional mission or a combination thereof If necessary specify those exceptional circumstances when component commanders have the authority for immediate engagement of TST regardless of assigned OA or mission The JFC should determine those situations if any where the immediate destruction of the imminent target outweighs the potential for friendly fire collateral damage or duplication of effort This determination would allow a component to bypass the requirement for informing coordinating deconflicting or synchronizing with other components However if time allows these efforts should always be accomplished before engagement d Identify specific data links and communication requirements between component C2 elements to conduct rapid coordination This includes authorizing direct liaison and coordination authority e Establish priority “quick fire” sensor-to-shooter communication links with defined conditions for circumventing or bypassing normal command coordination channels to improve timeliness of response 8 Successful DT requires a great deal of prior planning and coordination within the JAOC and with other components If DT is to be done correctly air planners must develop CONOPS that make capability available to the combat operation division prior to the start of execution This can be done in a number of ways Among the most common methods are a Preplanned target reference methods and FSCM such as kill boxes joint fires areas b Pre-positioned or on-call ISR and strike packages for rapid response to emerging targets c Using JIPOE to determine the most probable areas where targets will emerge during execution d Coordination and synchronization of DT operations by streamlining and developing procedures for rapid handover of the mission tasking to another component for mission execution if the primary component cannot attack a target that emerges 9 Error prevention and mitigation is an important consideration in planning for dynamic targeting Primary issues for consideration are 155 a Ensuring aircrew have the most current information pertaining to the location of SOF friendly ground forces and no-strike target lists b Ensuring robust ROE and related legal considerations are understood by all participants 10 Combat Identification Progression For prospective targets there are essentially three levels of CID that are relevant to those tasked to carry out actions against immediate and TSTs At the first level the track or entity is identified as friendly foe or neutral At the next level the prospective target’s type of platform is identified This will aid in determining the nature of tactical action required against it and will assist in prioritizing the target Finally a third level entails determining the prospective target’s intent such as by its track relative to friendly forces when possible This will further aid in establishing the prospective target’s priority and may sometimes entail reclassifying a target as a TST based on its potential threat to friendly forces 11 Liaison Officers LNOs from other functional components or Services may be very helpful during the dynamic targeting process For example the SOLE may be able to provide the JFACC with additional options for dealing with emerging targets provide locations and activities of SOF and other friendly forces assist with the prosecution of targets or assist in deconfliction However with other components direct cross component watch station-towatch station coordination may provide the best means to rapidly coordinate dynamic targeting and avoid delays or possible miscommunication through liaison elements Liaison elements may not have access to component asset availability needed to coordinate re-allocation decisions c Phase 5 Steps Both deliberate and dynamic target categories are prosecuted during this phase Because scheduled deliberate targets have already completed the find fix and tracks steps of Phase 5 due to being previously known fixed targets much of the following discussion will focus on dynamic target execution where appropriate 1 Step 1 - Find During this step emerging targets are detected and characterized for further prosecution a Inputs to step 1 include 1 Clearly delineated JFC dynamic targeting guidance and priorities 2 Focused JIPOE to include identified NAIs target areas of interest and cross cueing of intelligence disciplines to identify potential target deployment sites or OEs 3 Collection plans based on the JIPOE 156 b The find step involves intelligence collection based on the JIPOE Traditional ISR nontraditional ISR such as aircraft targeting pods and radar warning receiver indications and SOF may provide initial detection of a potential target for both deliberate and DT In this section the term “sensor” refers both to traditional and nontraditional ISR means c The term “emerging target” is used to describe a detection that meets sufficient criteria to be evaluated as a potential target The criticality and time-sensitivity of an emerging target and its probability of being a potential target is initially undetermined Emerging targets normally require further ISR and or analysis to develop confirm and continue the targeting process During step 1 see Figure III-15 Find Step Determinations and Actions an emerging target will be 1 Validated as a target meeting requirements established during deliberate targeting 2 Designated a potential target or TST requiring DT 3 Designated a potential target not requiring dynamic targeting and passed to deliberate targeting 4 Continued to be examined or analyzed by sensors as a potential target that is continuing the find step 5 Discarded completely or entered on the NSL d If an emerging target is detected identified and determined to be a potential target by a system capable of engaging it this may result in the find and fix steps being completed nearly simultaneously without the need for traditional ISR and the target and engage phases being completed with a much abbreviated coordination and approval process For example use of aircraft systems that carry ISR and weapons capability may enable accomplishment of Steps 1-5 and assessment using a single platform e Output of the find step potential targets detected and nominated for further development 157 Figure III-17 Find Step Determinations and Actions 2 Step 2 - Fix A “fix” is a position determined from terrestrial electronic or astronomical data The fix step of this phase includes action to determine the location fix of the potential target for DT and on-call target for deliberate targeting a Inputs to step 2 include 1 Potential targets requiring dynamic targeting 2 Sensor information on the target 3 On-call targets for deliberate targeting b The fix step begins after potential targets requiring dynamic targeting or on-call targets for deliberate targeting are detected When a potential target is identified sensors are focused to confirm target identification and its precise location The correlation and fusing of data confirms identifies and locates the target and it may then be characterized as a TST or other target requiring dynamic or deliberate targeting TSTs receive the highest priority in dynamic targeting 158 c A determination or estimation of the target’s window of vulnerability frames the timeliness required for prosecution and affects the required prioritization of assets and risk assessment d Output of step 2 are 1 PID 2 Target location accuracy refined to a level required for target engagement 3 Determination or estimation of target time characteristics 3 Step 3 - Track During this step the target is observed and its activity and movement are monitored a Inputs to step 3 include 1 A positively identified target 2 Target location and plot of movement if applicable b The track step begins once a definite fix is obtained on the target and ends when the engagement’s desired effect upon the target is determined Note some targets may require continuous tracking upon initial detection as an emerging target Sensors may be coordinated to maintain SA or track continuity Target windows of vulnerability should be updated when warranted Relative priorities for ISR requirements are based on JFC guidance and objectives TSTs generally receive the highest priority If track continuity is lost the fix step will likely have to be repeated and potentially the find step as well c Output of step 4 are 1 Track continuity maintained on a target by appropriate sensor or combination of sensors 2 Sensor prioritization scheme 3 Updates to target window of vulnerability 4 Step 4 - Target During this step the decision is made to engage the target in some manner to create desired effects and the means to do so are selected and coordinated a Inputs to step 4 include 159 1 Identified characterized located and prioritized target 2 Restrictions CDE guidance WMD consequences of execution LOW ROE NSL and RTL component boundaries and FSCMs 3 SA on available assets from all components b The target step begins with target validation That is operations personnel ensure all vetted targets meet the objectives and criteria outlined in the commander’s guidance Additionally validation reviews the target’s compliance with LOW and ROE and ensures it is not otherwise restricted The target phase matches available engagement and sensor assets against the desired effect Restrictions are resolved the actions against the target are coordinated and deconflicted and a risk assessment is performed The target is weaponeered engagement options are formulated a recommendation is nominated an option is selected to affect the target and assessment requirements are submitted The target phase can be time-consuming due to the large number of requirements to satisfy Target step actions can be initiated and or completed in parallel with previous phases to enable timely decisions c Output of step 4 are 1 The target is validated 2 Target data information or intelligence products are finalized in a format useable by the system that will engage it 3 Asset deconfliction and target area clearance considerations to include interagency and multinational partner deconfliction are resolved 4 Target execution is approved decision in accordance with JFC and component commander guidance is validated 5 Assessment CRs are submitted 6 Collateral damage estimates are performed 7 Collateral affects estimates for chemical biological or radiological targets and environmental concerns are performed 5 Step 5 - Engage In this step action is taken against the target a Inputs to step 5 include 1 Target approval decision 160 2 Selected engagement option b During the engage step the engagement is ordered and transmitted to the selected asset Engagement orders must be transmitted to received by and understood by those engaging the target The engaging component manages and monitors the actual target engagement The CID process is conducted prior to target engagement and continues throughout the engagement in coordination with the controlling agency for any changes to the OE that may affect the engagement decision c Output of step 5 are 1 Issuing and passing of the engagement order 2 Engagement direction and control 3 Target engagement via lethal or nonlethal means 6 Step 6 - Assess In this step initial assessment of action against the target is performed a Input to step 6 is target engagement b During the assess step initial assessment of the physical or functional status of the target takes place For attacks in the physical environment the assessment confirms impact of the weapon on the target and makes an initial estimate of the damage For nonlethal weapons the initial assessment attempts to detect changes in functionality indicating a successful engagement c For both lethal and nonlethal weapons this initial assessment is part of BDA Phase I Attack recommendations are generally not made using BDA Phase I information However in cases of a confirmed miss a reattack may be authorized based on target priority and weapon availability d Further assessment takes place in phase 6 targeting assessment 7 Phase 6 – Targeting Assessment a Overview The targeting assessment phase is a continuous process that assesses the effectiveness of the activities that occurred during the first five phases of the JTC The targeting assessment process helps the commander and staff determine if the ends ways and means of joint targeting have resulted in progress toward accomplishing a task creating an effect or achieving an objective Targeting assessment occurs at the tactical operational and strategic levels of war The 161 assessment of target engagement results must be integrated to provide the overall joint targeting assessment 1 The targeting assessment phase is common to both deliberate and dynamic targeting of the joint targeting process and examines the results of the target engagement Effective assessments in phase 6 require detailed continuous inputs from the first five phases of the joint targeting process 2 Assessment is used to measure progress of the joint force toward mission accomplishment Commanders continuously assess the OE and the progress of operations and compare them to their initial vision and intent Commanders adjust operations based on their assessment to ensure tasks are completed effects created objectives achieved and the desired end state reached The assessment process is continuous and directly tied to the commander’s decisions throughout planning preparation and execution of operations Staffs monitor key factors that can influence operations and provide the commander timely information needed for decisions The assessment process helps the commander and staff decide what and how to measure to determine progress toward accomplishing a task creating an effect or achieving an objective Commanders and their staffs determine relevant assessment actions and measures during planning They consider assessment measures as early as mission analysis and include assessment measures and related guidance in commander and staff estimates They use assessment considerations to help guide operational design because these considerations can affect the sequence and type of actions along LOOs Phase 6 is a continuous process that measures the overall effectiveness of employing joint force targeting capabilities during military operations It supports the commander’s decisions within the JTC and contributes to the overall operation or campaign assessment process 3 During conflict the US will use all instruments of its national power against the full spectrum of adversary systems – PMESII and others Organizationally diverse yet operationally interconnected instruments of national power must be synchronized to achieve the desired objectives Assessment must parallel this multidimensional approach Friendly adversary and neutral diplomatic informational and economic actions applied in the OE can impact military actions and objectives Conversely military actions will influence the employment and effects of diplomatic informational and economic instruments of national power in the OE The commander should plan to assess the results of these actions This typically requires collaboration with other agencies such as elements from the Department of State DOS or the Department of Homeland Security DHS national intelligence agencies multinational partners intelligence sources and other CCMDs to generate a complete and accurate assessment 4 The outputs from phase 6 are CDA MEA and reattack recommendations RR 162 b Assessment and the Levels of War Assessment occurs at all levels see Figure III-16 Assessment Levels and Measures and across the range of military operations Even in operations that do not include combat assessment CA progress is just as important and can be more complex than traditional CA As a general rule the level at which a specific operation task or action is directed should be the level at which such activity is assessed To do this JFCs and their staffs consider assessment ways means and measures during planning preparation and execution This properly focuses assessment and collection at each level reduces redundancy and enhances the efficiency of the overall assessment process Figure III-18 Assessment Levels and Measures 1 Operational and Theater Strategic-Level Assessment Assessment at the operational and strategic levels typically is broader than at the tactical level 163 e g CA and uses MOEs that support strategic and operational mission accomplishment Strategic- and operational-level assessment efforts concentrate on broader tasks effects objectives and progress toward the end state In general assessments should answer two questions “Is the joint force doing things right ” and “Is the joint force doing the right things ” The JFC also can use MOEs to determine progress toward success in those operations for which tactical level CA ways means and measures do not apply Strategic and operational level assessment helps the JFC adjust planning and execution as necessary and also provides the President and SecDef a way to measure progress towards national-strategic objectives 2 Tactical Level Assessment Tactical level assessment typically uses MOPs to evaluate task accomplishment The results of tactical tasks are often physical in nature but also can reflect the impact on specific functions and systems Tactical level assessment may include assessing progress by phase lines PLs neutralization of enemy forces control of key terrain or resources and security relief or reconstruction tasks Assessment of results at the tactical level helps higher level commanders determine operational and strategic progress so JFCs must have a comprehensive integrated assessment plan that links assessment activities and measures at all levels c Combat Assessment CA encompasses many tactical-level assessment actions and has implications at the operational level as well CA typically focuses on determining the results of weapons engagement with lethal or nonlethal capabilities and thus is an important component of joint fires and the joint targeting process To conduct CA it is important to fully understand the linkages between the targets and the JFC’s objectives targeting guidance and desired effects This linkage begins with targeting tasks effects and objectives which support assigned operational tasks effects and objectives It is important to understand the difference between operational objectives effects targeting objectives effects and munitions effects CA is composed of three related elements BDA MEA and RR or future targeting 1 CA effectively “closes the loop” and feeds the other elements of the targeting process To determine the performance of an operation three questions need to be answered First were the assigned tasks completed at the target and with respect to the larger target system BDA Second did the forces assigned perform as expected MEA Finally if the desired targeting outcomes were not achieved or if the employed forces did not perform as expected what should be done now RR From the answers to these questions an assessment can be made and future targeting options can be recommended 2 The CCMD and the subordinate JTF should establish a CA management system and combine the expertise of operations and intelligence staffs A comprehensive CA program greatly assists the JFC in determining future 164 targeting requirements facilitates planning and supports more efficient execution 3 Battle Damage Assessment The purpose of BDA is to compare postexecution results with the projected expected results generated during target development Effective BDA requires a coordinated and integrated effort between joint force intelligence and operations functions Traditionally BDA is composed of physical damage change assessment functional damage change assessment and functional assessment of higher-level target system BDA takes a three-phased approach to proceed from a micro-level examination of the damage or effect inflicted on a specific target element to ultimately arriving at macro-level conclusions regarding the functional outcomes created in the higher-level target system Phase 3 analysis suggests BDA and consequently CA can have both tactical and operational impact These three assessments require different sensors analytical elements and timelines and are not necessarily subcomponents of each BDA report a BDA is primarily an intelligence responsibility requires inputs and coordination from operations and can be federated throughout the IC b The most critical ingredient for effective BDA is a comprehensive understanding of the linkage between the specific targeting effect objective and the operational level task effect and objective it supports For BDA to be most effective a comprehensive plan must be developed which incorporates intelligence architecture and ISR resources and provides information support that ensures timeliness Pre-conflict planning requires CMs with a thorough understanding of collection systems capabilities both organic and national as well as their availability Targeting personnel should also have a basic understanding of the collection systems supporting the operation c During combat BDA reporting should follow standardized formats and timelines and be passed to command planners and force executors immediately The CJCSM 3162 01series Joint Methodology for Battle Damage Assessment establishes joint methodology for conducting BDA and provides analysts with the definitions methodology and principles of reporting required to conduct BDA This manual also bridges the gap between doctrinal guidance in Joint Publications and the Combatant Commands BDA Concepts of Operations Another useful guide the DIA BDA Reference Handbook contains detailed technical information to support BDA analysis during military operations and to assist in providing basic training for BDA team members The three phases of BDA are described below d Battle Damage Assessment Phase 1 - Initial Target Assessment Initial Target Assessment reports on physical change assessment target element and functional damage target A physical damage assessment is an 165 estimate of the quantitative extent of physical damage through munitions blast fragmentation or fire damage to a target element based on observed or interpreted damage This post-attack target analysis should be a coordinated effort among combat units component commands the subordinate joint force the CCMD primary theater BDA cell national agencies supporting commands and the JIOC Some representative sources for data necessary to make a physical damage assessment include the ATO or MAAP mission reports MISREPs aircraft cockpit video weapons system video visual verbal reports from ground spotters or combat troops controllers or observers artillery target surveillance reports signals intelligence SIGINT human intelligence HUMINT imagery intelligence IMINT measurement and signature intelligence MASINT or open-source intelligence 1 Key factors in determining the extent of physical damage are target type and size Was the attacked target element a piece of equipment or a building or bunker How hard is the target How big is the target 2 To quantify physical damage the assessment is conducted against critical elements Destruction of an entire building may not be required if the stated objective is to destroy a specific portion of the building based on the function critical element conducted within that section of the building Assessments of “NO DAMAGE” or “DESTROYED” are easily defined and understandable The difficulty comes in subjective judgment specifying the level of damage between these two extremes Intermediate damage definitions are dependent on target type and the ease of assessing damage For example in buildings “LIGHT” “MODERATE” and “SEVERE” damage is determined by the percent of the target area building damaged In contrast when assessing armored vehicles only the “DAMAGED” category is used Likewise runways have more specific categories that include “CRATERED” “CUT” and “INTERDICTED ” In assessing physical damage consider whether the enemy may have used camouflage concealment and deception techniques to either minimize or amplify the apparent extent of physical damage thereby distorting the assessment 3 In determining the level of physical damage we assign a confidence level to the assessment The three terms used to identify confidence are CONFIRMED 95 percent or greater confidence PROBABLE greater than 50 percent confidence and POSSIBLE less than 50 percent confidence Detailed information and definitions of these confidence levels along with physical damage definitions for specific target elements may be found in CJCSM 3162 01 series Joint Methodology for Battle Damage Assessment The joint force may provide additional guidance reporting when certain confidence levels are appropriate 4 Collateral damage is also assessed and reported during BDA 166 5 Initial reports are often based primarily on visual observation of the target and usually derived from a single source Further analysis continues with all-source reporting resulting in further supplemental reports The command designated BDA cell is responsible for collating reports and making the final assessment 6 BDA Phase I is usually the first indicator of problems with weapons systems or tactics assessed during MEA 7 Change Assessment Change Assessment is identifying and assessing measurable change to the target element resulting from weapons that do not create physical change This type of assessment is the nonphysical damage equivalent of physical damage assessment Both physical damage and change assessments required a confidence call 8 Functional Damage Assessment FDA A FDA is an estimate of the degradation or destruction of the functional operational capability of a target target system to perform its intended mission Functional assessments are inferred from the assessed physical damage and all source intelligence information This assessment must include an estimation of the time required for recuperation or replacement of the target’s function BDA analysts need to compare the desired targeting effect or objective for the attack with the current status of the target to determine if the targeting objective was met FDA's are performed in all three phases of BDA reporting In Phases 1 Initial Target Assessment and Phase 2 Supplemental Target Assessment a FDA is conducted at the target level and in Phase 3 Target System Assessment at the target system level e Battle Damage Assessment Phase 2 - Supplemental Target Assessment Like Initial Target Assessment Phase 1 Supplemental Target Assessment Phase 2 reports on the physical change target element and functional target damage levels However in this phase all-source intelligence is provided and more time is available to provide a detailed reassessment due to damage levels based on cumulative effects Analyst functional damage assessment on the target in Phase 2 is required 1 Functional damage assessment reviews all physical damage assessments and amplifies the initial analysis A key step in functional damage assessment is identifying and establishing the installation or target’s critical elements and their interconnectivity A critical element is defined as one which if destroyed or not operating will preclude the installation from functioning Additionally the target’s “normal” level of operation must be quantified If it is an industrial target what does it produce If it is a military installation what basic purpose does it serve Without these pre-attack assessments wartime functional damage assessments may be 167 inadequately stated Ideally BDA will be performed by or with the input of the targeteer who originally targeted the facility equipment 2 An estimate of the recuperation time required for the enemy to repair or reconstitute should always be part of a battle damage assessment report BDAREP This time expressed in hours days etc is an estimate based upon type degree and location of the physical damage Factors used to calculate recuperation times include the availability of spares backup or alternate replacement functions operational tempo expected duration of hostilities and the enemy’s determination to repair or replace This phase requires the integration of theater and national source information The theater JIOC has access to these sources and provides significant support SIGINT IMINT and MASINT sources are also useful during this phase 3 Often BDA analysts have relatively little information by which to make a functional damage assessment Therefore it is important for analysts to verify the target critical elements were properly identified weapons effects were reasonably predicted beforehand and all available and relevant intelligence information is considered in the assessment 4 Developing appropriate indicators and collection plans ahead of time is crucial to timely Phase II assessments especially if the damage cannot be directly observed These indicators allow analysts to rapidly identify the critical elements what sources are capable of collecting the required information best collection time what specific change in activity the sensor should collect and how this change in activity determines the target’s functional status This facilitates BDA collection planning since optimal collection times are more easily determined well in advance Examples of such indicators and collections plans may be found in various DOD agency products such as the JWAC’s “Functional Damage Assessment FDA Guides for Electric Power Industry Lines-ofcommunications Petroleum-Oil-Lubricants Industry and Telecom Networks ” f Battle Damage Assessment Phase 3 - Target System Assessment Target System Assessment reports on the functional damage assessment at the target system level This phase provides a broad assessment based on all source reporting of the overall impact on an adversary target system relative to the targeting objectives established These assessments are typically conducted at the national-level by fusing Phases 1 and 2 BDA reporting on targets within a target system A typical timeline associated with this report is collection dependent 1 Phase III produces a target system assessment for the theater of operations SMEs compile the functional damage assessments of the individual targets within a system and apply it to the current system 168 analysis or enemy order of battle EOB Although different weapons are involved the process described above applies to BDA of targets attacked with nonlethal fires as well SIGINT will often be the most capable collection asset of determining the actual functional damage to the target in these cases g Federated Battle Damage Assessment Federated BDA allows the supported CCDR to establish pre-planned partnerships to share responsibilities and leverage appropriate expertise from outside the theater The CCDR may request federated BDA support from multiple commands and agencies through the JS J-2 Upon approval each agency in the partnership will be assigned specific targets either by individual target sets categories or by geographic region The JS J-2 will work with the requesting command to form the best federated partnership based on available resources and capabilities For additional information on the BDA process see Chairman of the Joint Chiefs of Staff Manual 3162 01 Joint Methodology for Battle Damage Assessment 4 Munitions Effectiveness Assessment MEA is an element of CA as the assessment of the military force applied in terms of the weapons system and munitions effectiveness to determine and recommend any required changes to the methodology tactics weapon system munitions fusing and or weapon delivery parameters to increase force effectiveness a The purpose of MEA is to compare the actual effectiveness of the means employed to their anticipated effectiveness calculated during the capability analysis phase of the JTC The results of MEA support both near term improvement in force employment and long-term improvements in lethal and nonlethal capabilities Consequently a critical ingredient for effective MEA is detailed familiarity with all inputs to the calculations performed in capability assessment that resulted in weapon system selection b MEA is conducted concurrently and interactively with BDA assessments MEA is primarily the responsibility of component Service commanders with inputs and coordination from the IC MEA evaluates weapons parameters such as delivery accuracy fusing and damage mechanisms blast fragmentation and penetration MEA targeting personnel seek to identify through a systematic trend analysis any deficiencies in specific weapons systems tactics munitions performance or combat tactics by answering the question “Did the employed forces perform as expected ” If a deficiency is identified the operators targeteers and analysts make recommendations for weaponeering or procedural changes different tactics or system modifications Using a variety of intelligence and operations inputs to include Phase 2 functional damage assessments operators prepare a report assessing munitions performance and tactical applications The report details weapon performance against specified 169 target types Such information could have a crucial impact on future operations Of note MEA efforts can continue years after the conflict has ended by using archived data and information collected later by on-site inspections of targets struck during the conflict 5 Future Targeting and Reattack Recommendations Future target nominations and RRs merge the picture of what was done BDA with how it was done MEA and compares the result with predetermined MOEs that were developed at the start of the JTC The purpose of this phase in the process is to determine degree of success in creating desired targeting effects achieving targeting objectives to formulate any required follow-up actions and to indicate readiness to move on to new tasks in the path to supporting the overall JFC objectives a This activity develops recommendations on which targets may require reattack based upon the enemy’s remaining capability capacity and potential for recuperation In doing so it also attempts to solve deficiencies identified during the BDA and MEA processes Reassessments of objectives target selection vulnerabilities timing tactics weapons and munitions all factor into the new recommendations b Future targeting recommendations range from attacking different targets to changing munitions or delivery tactics The RR and future targeting is a joint operations and intelligence function and must be assessed against the relative importance of the target to the current targeting effort operation At the tactical component level this activity prompts decisions on immediate reattack At the operational strategic level the daily operational assessment is incorporated into strategy development future target selections based on updated targeting objectives targeting guidance and intent review of the ROE and guidance to components for immediate reattack of operational critical targets 6 Information Operations Considerations for Combat Assessment IO employment methods can differ from traditional force application and may require different mechanisms to measure the weapons effect on a target in support of the targeting objective Targeting analysts performing CA should work very closely with operations personnel and members of the IO cell to ensure all potential CA indicators are evaluated a The typical methodology for IO BDA uses a change assessment functional damage assessment and higher-level target system assessment to determine the effectiveness of the weapons and tactics employed to achieve the stated targeting objective Change assessment is based upon observed or interpreted battle damage indicators at selected monitoring points It uses a systematic understanding of complex target systems and leverages intelligence capabilities to identify and assess changes associated with the target The quantitative change during assessment is 170 used to assess the resulting functional damage This assessment is not limited to the intended target system and may even encompass several systems in order to ascertain and justify the assessment results IO MEA and RR are similar to traditional CA processes described above b Unlike conventional collateral effects it is possible for intended and unintended effects of IO to not be directly observable Specialized sensors may be required to detect results Therefore a more detailed analysis of the entire target system is warranted d Estimated Damage Assessment EDA EDA is an analysis technique or change assessment process that supports a physical damage assessment by anticipating damage using probability of weapon success to support EDA This action is performed when BDA-related intelligence is not available but an assessment is required The current CA process relies on phased BDA analysis as a major part of assessing combat task completion If no data is available for a target the assessment is usually left blank or unknown Based on the BDA scenario and commander’s targeting guidance analysts may try to provide a prediction of the estimated damage for both individual target elements and higher-level target components sets systems based on the initial predictions as place holders for the probabilities of success This process is facilitated by the precision and reliability of many modern weapon systems As the operation is executed the predictions for targeting effects on individual target elements are updated continually with the latest available information on the action taken Such updates might be definitive BDA or it may be information which while not definitive helps refine the estimate e g confirmation that a joint direct attack munitions successfully dropped through the clouds on the programmed coordinates Combining the latest information on individual target elements means an assessment cell can provide a more refined estimate of success As more definitive data becomes available the assessment becomes less of an estimate and more an actual assessment of what was or was not achieved Empirical data from the Joint Munitions Effectiveness Manual JMEM aids the analyst in determining the probability of weapons damage or effects based on historical testing and operational data Analyst who use EDA should report a confidence level of POSSIBLE less than 50 percent confidence and note this information in the BDA report 1 The overall goal of this approach is to provide the JFC with the best estimated assessment of the progress of the joint operation at any given time using all information available For lethal strikes this means using assessed effects where BDA is available It then predicts the effects for strikes where BDA is not yet available Such predictions should be based on historical data of previous strike performance and analyses of likely success given the specific planned weapon target pairings e g JMEM data Finally assessment agents assessors should continuously refine effects predictions based on the success of intermediate steps in the execution chain This means even where final definitive BDA is not available for a given strike assessors should 171 update the prediction of likely strike success as soon as it is known whether the planned task was actually performed update again as soon as it is known whether the weapon was successfully released and update again as soon as it is known if the weapon successfully guided to target 2 A key aspect of this iterative predictive approach is that it addresses the need for a smooth transition between assessing a plan prior to execution when only predictions are available to assessing a plan in the midst of execution when partial BDA information is available and finally through assessing success at the end of an operation approaching full BDA availability Estimation can also facilitate undertaking higher level assessments of more complicated interdependent systems 3 Estimating higher level effects based on estimates of what happens at specific target elements has advantages and limitations A key advantage is that by using the predictive approach discussed earlier assessors will have a more specific basis for estimating what happens at specific target elements This estimate will be based on a combination of prediction and when available execution data These estimated targeting effects on specific target elements can then serve as the input to the model of the higher-level target component set system in estimating higher-level effects A key limitation is that the fidelity of the estimate diminishes the further one gets from the initial direct targeting effects of the action or task accomplishment e Collateral Damage Assessment CDA leverages the information and analysis from Phases 1 and 2 of BDA to identify and characterize the location magnitude and cause of collateral damage that occurred during target engagement CDA evaluates direct and indirect targeting effects on nearby collateral objects and the noncombatant population addressing “the who what when where and why of collateral damage ” The outputs of CDA feed the JFC’s evaluation of COPS and provide the information and analysis to guide future development of collateral damage mitigation techniques f Post-Combat Assessment The joint targeting process does not end when hostilities cease During the stabilize and enable civil authority phases of the joint operation there is normally a critical need to collect all available information to feed both BDA and MEA analysis This data collection effort is essential to 1 Evaluate the full extent of target physical and functional damage 2 Determine the true effectiveness of employed delivery systems and munitions and 3 Critique and improve the assessment analysis and reporting process 1 Although there are many different types of data to collect for follow-on analyses generally they can be grouped into the areas of operational data intelligence and MEA exploitation Collection of operational or missionspecific data includes all executed mission type orders to include all executed ATOs all MISREPs and copies of aircraft or weapon system recorded data at a minimum This includes both national and tactical intelligence gathered 172 during the operations as well as continued post conflict damage assessment and analysis of reconstruction activities 2 Finally the optimal method to analyze munitions effects is to deploy MEA exploitation teams engineers tacticians and intelligence analysts to conduct on-site analyses of the damage from the ground-level perspective The goal of these “ground truth” operations is to bridge the gap of knowledge that exists between the level of damage the BDA collection assets have assessed during hostilities and what actual physical functional and cognitive effects were created in the adversary targets and systems Due to the perishable nature of critical data at many targeted sites planning for ground truth exploitation needs to be fully integrated into appropriate plans i e OPLANS for immediate execution following combat operations If feasible initial exploitation can also be accomplished during ongoing operations by ground forces 173 CHAPTER IV PRODUCTS AND PROCESSES SECTION A LAND AND MARITIME COMPONENT INPUTS 1 General a The targeting process uses and generates an enormous amount of information and data To make that information and data usable a number of tools and products exist to assist in the development and management of targeting products that support the targeting process The commander the targeting working group and supporting and supported units use them The products allow them to control and synchronize targeting in an effective and efficient way In the majority of cases formats for tools and products are not rigidly prescribed Each unit may develop techniques and tools that work best for them However tools and products contributing to joint fires networked systems see Appendix C “Joint Fires Networked Systems” must be interoperable Additionally tools and products must be continually updated to reflect changes in the OE Some factors to consider in developing tool formats include 1 Type and level of the command 2 OE 3 Assets available 4 Missions 5 Standing operating procedures 6 Existing C2 tools of record b Each Service component has established unique doctrine and tactics techniques and procedures for targeting Several publications address targeting procedures through their emerging doctrinal manuals The habitual integration of resources from one or more Service components has been developed to support the targeting requirements of another Service component and multinational forces The tools and products described in this section are those doctrinally used by the land and maritime components and those organizations involved in supporting the decide detect deliver and assess D3A TST decision-making process c D3A uses targeting tools and products to support decision making regarding what targets should be acquired and attacked where and when the targets likely will be found who can locate them how the targets should be attacked and if BDA is required Some of the more common tools and products of D3A include 174 1 Target spreadsheets folders – Detailed description of the HVT to include expected actions configuration and relative worth 2 High Payoff Target List – Prioritized list of HPTs 3 Target Selection Standards TSS – Accuracy requirements or other specific criteria that must be met before targets can be attacked 4 ISR Plan – Where and when should targets be found and who can find them 5 Attack Guidance Matrix AGM – Matrix outlining desired effects when and how targets should be attacked 6 Targeting synchronization matrix TSM – Prioritized matrix of targets that should be acquired and attacked during the upcoming cycle or phase 7 Delivery standards matrix – Provides criteria for the attack of HPTs in each phase of the battle It also facilitates objective decision making for attacking targets at the lowest level possible These seven products are discussed in greater detail later in this section For additional Information on D3A see FM 3-60 The Targeting Process 2 Decide Detect Deliver and Assess Target Value Analysis a Target value analysis occurs during the decide function of D3A and yields HVTs for a specific enemy COA It involves a detailed analysis of enemy doctrine tactics equipment organizations and expected behavior for a selected COA The target value analysis process identifies potential HVT sets associated with critical enemy functions that could interfere with the friendly COA or that are vital to enemy success b If an HVT can be successfully acquired is vulnerable to attack and such an attack supports the JFC’s scheme of maneuver the target may be nominated as a HPT c Wargaming Wargaming helps identify which target acquisition assets will be tasked how information will be processed which means will be used to attack what requirements exist for CA and target sets During wargaming a decision support template is developed In addition other products from these wargaming efforts are the HPT list AGM TSS and ISR plan See Figure IV-1 Combined High-Payoff Target List Target Selection Standards Attack Guidance Matrix Sample Of note these products are not recognized as joint terms but may be found in FM 3-60 The Targeting Process They are specific to D3A 175 Figure IV-1 Combined High-Payoff Target List Target Selection Standards Attack Guidance Matrix Sample 176 d After wargaming all of the COAs the staff compares them and recommends a COA to the JFC for approval Upon approval of the COA the targeting products for that COA become the basis for targeting for the operation The targeting team meets to finalize the HPT list TSS AGM and input to the ISR plan The team also performs any additional coordination required After accomplishing these tasks targeting team members ensure targeting factors that fall within their functional areas are placed in the appropriate part of the OPLAN OPORD For additional information on target value analysis see FM 3-60 The Targeting Process Chapter 2 The Targeting Methodology 3 High-Payoff Target List a The HPT list is a prioritized list of the HPTs by phase of the joint operation While target value is usually the greatest factor contributing to target payoff other things to be considered include 1 The sequence or order of appearance 2 Ability to detect identify classify locate and track the target 3 Degree of accuracy available from the acquisition system 4 Ability to engage the target 5 Ability to defeat the target on the basis of attack guidance 6 Resource requirements necessary to accomplish all of the above b The column headings on the HPT list include see Table IV-1 High-Payoff Target List 1 Priority – The priority of the targets is listed 2 Category – Identifies the target category including designation as a TST 3 Target – The title or a brief description of the intended target is listed c Targets are prioritized according to the considerations above within specific time windows The targeting working group sets priorities for the targets according to 177 its judgment and the advice of the fires cell targeting officer and the field artillery intelligence officer Target spreadsheets give a recommended priority and attack sequence If the target spreadsheet or wargaming departs from the commander’s guidance it is noted on the proposed HPT list to inform the commander of the conflict The target category of the HPT is shown either by name or by number on the list The category name and number are shown on the target spreadsheet d One way to organize the HPT list is to group all HPTs into target sets that reflect the capabilities and functions described in the targeting objectives Target sets are identified and prioritized for each phase of the operation Within the sets individual targets are rank-ordered by target value sequence of appearance importance or other criteria that satisfy the targeting objectives In this way the targeting team reduces modifies and reprioritizes HVTs while ensuring HPTs support the CONOPS e The JFC’s guidance may require changes which should be annotated on the HPT list The target name or number and description are placed on the list for specific HPTs in each category Once the JFC approves or amends the HPT list it goes back to the targeting team to help them develop the AGM and collection plan Table IV-2 High-Payoff Target List For additional information on high-payoff target lists see FM 3-60 The Targeting Process Chapter 2 The Targeting Methodology f Target Selection Standards 1 TSS are criteria applied to enemy activity acquisitions and battlefield information and used in deciding whether the activity is a target TSS put 178 nominations into two categories targets and suspected targets Targets meet accuracy and timeliness requirements for attack Suspected targets must be confirmed before any attack 2 TSS are based on the enemy activity under consideration and available weapon systems by using the following a Weapon system target location accuracy requirements target location error TLE Special consideration must be given to TLE for the employment of guided precision munitions b Size of the enemy activity point or area c Status of the activity moving or stationary d Timeliness of the information 3 Considering these different TSS may exist for a given enemy activity based on different weapons system For example an enemy artillery battery may have a 150-meter TLE requirement for attack by cannon artillery and a 1 kilometer requirement for attack aircrafts TSS are developed by the fires cell in conjunction with the military intelligence MI personnel Intelligence analysts use TSS to quickly determine targets from battlefield information and pass the targets to the fires cell Weapon system managers such as fires cells fire control elements or fire direction centers use the TSS to identify targets for attack quickly Commands can develop standard TSS based on threat characteristics and doctrine matched with the standard available weapon systems g Target Selection Standards Matrix This product summarizes TSS and is usually comprised of the following essential elements See Table IV-2 Target Selection Standards Matrix 1 High-Payoff Target – This refers to the designated HPT the CM is tasked to acquire 2 Timeliness – Valid targets are reported to weapon systems within the designated timeliness criteria 3 Accuracy – Valid targets must be reported to the weapon system meeting the required TLE criteria The criteria are the least restrictive TLE considering the capabilities of available weapons system 179 Table IV-3 Target Selection Standards Matrix h Target Selection Standards Worksheet This product incorporates TSS into a document that can be used to track and confirm or deny targets generated by each sensor source The column headings are described below See Table IV-3 Target Selection Standards Worksheet 1 High-Payoff Target – This column lists the HPT from the HPT list 2 Source – Sensor agent 3 Target Location – Location by grid coordinates 4 Accuracy Target Location Error – Sensor reliability normally stated in meters 5 Time of Target – Record the date-time group the sensor acquired the target 6 Time Limit – How old the acquisition can be and still be attacked 7 Validity Confirmed – Confirmation by a second source is recorded by using YES or NO Confirmation by another sensor may not be necessary depending on the sensor 8 Clearance Cleared – Who or what agency cleared the target for attack which is especially critical where the potential for fratricide exists 180 Table IV-4 Target Selection Standards Worksheet i For nonlethal attacks the J-3 may have to develop descriptive criteria to supplement or replace criteria developed by the FSE For example nonlethal TSS during a peace operation may describe what constitutes a hostile crowd such as a group larger than 25 people armed with sticks or other weapons and with leaders using radios or cellular telephones to direct it To do this the J-3 identifies specific pressure points such as one’s credibility The J-3 then attacks these pressure points with specific means products delivered to a specific communications node or system to cause a specific effect For additional information on TSS see FM 3-60 The Targeting Process Chapter 2 The Targeting Methodology 4 Intelligence Surveillance and Reconnaissance Plan a ISR is a continuous combined arms effort led by the operations and intelligence staffs in coordination with the staff that sets reconnaissance and surveillance in motion The PIR and other intelligence requirements IRs drive the collection effort The commander takes every opportunity to improve his situational understanding about the enemy and terrain Commanders integrate reconnaissance and surveillance to form an integrated ISR plan that capitalizes on their different capabilities The ISR plan is often the most important part of providing information and intelligence that contribute to answering the CCIR b The ISR plan provides a framework that CMs can use to determine and evaluate intelligence needs and then use the plan to meet those needs Because of the diversity of missions capabilities and requirements the ISR plan has no prescribed doctrinal format However a dynamic ISR plan should 1 Use the JFC’s IRs PIRs and CCIRs as its baseline 2 Help the JFC see as deep in depth and time as possible 3 Cover the JOA 181 4 Have a four-dimensional OE approach width length height and time Note some components may add a fifth dimension EM 5 Cover the collection capabilities of higher and adjacent units 6 Be flexible enough to respond to changes as they occur 7 Cover only priority requirements 8 Be a working document 9 Contain precise and concise language c Information Collection Matrix The information collection matrix is the requirements planning tool that links PIRs essential elements of information indicators and specific information requirements with NAIs and TAIs Constructed in spreadsheet format and composed of individual worksheets as required the matrix provides detailed collection and reporting requirements The information collection matrix is not a tasking document Although not published as part of the base order the matrix is a key tool used by intelligence and the operations staffs in the execution of the information collection plan See Figure IV-2 Sample Information Collection Matrix 182 Figure IV-5 Sample Information Collection Matrix d Intelligence Surveillance and Reconnaissance Synchronization Matrix The ISR synchronization matrix is a product used by the intelligence officer to ensure collection tasks are tied to scheme of maneuver in time and space effectively linking reconnaissance and surveillance to maneuver and effects The ISR synchronization matrix is typically constructed in spreadsheet format and is always accompanied by an ISR overlay that graphically depicts the information contained in the matrix The intelligence officer uses the matrix to synchronize reconnaissance and surveillance tasks in the same way the operations officer uses the maneuver synchronization matrix to synchronize the overall unit scheme of maneuver This product may also be referred to as a collection synchronization matrix See Table IV-4 Sample Intelligence Surveillance and Reconnaissance Synchronization Matrix 183 Table IV-6 Sample Intelligence Surveillance and Reconnaissance Synchronization Matrix For additional information on ISR plans information collection and associated matrixes see ATTP 2-01 Planning Requirements and Assessing Collection and FM 3-60 The Targeting Process 184 5 Attack Guidance a Knowing target vulnerabilities and analyzing the probable effect an attack will have on enemy operations allows a staff to propose the most efficient available attack option Key guidance is whether the commander wishes to disrupt delay limit damage or destroy the enemy During war gaming decision points linked to events areas of interest or points on the battlefield are developed These decision points cue the command decisions and staff actions where tactical decisions are needed b Based on commander’s guidance the targeting working group recommends how each target should be engaged in terms of the effects of fire and attack options to use Effects of fire can be to harass suppress neutralize or destroy the target The subjective nature of what is meant by these terms means the commander must ensure the targeting working group understands his use of them Application of fire support automation system default values further complicates this understanding c Following recommendations from the targeting working group the commander approves the attack guidance This guidance should detail the following 1 A prioritized list of HPTs 2 When how and desired effects of attack 3 Any SPINS 4 HPTs that require BDA d This information is developed during the war game Attack guidance applies to both planned targets and TOO Accordingly attack guidance may address specific or general target descriptions Attack guidance is provided to weapon system managers via the AGM e Attack Guidance Matrix The AGM is a synchronization and integration tool and is normally included as part of the fire support annex However it is not a tasking document Only one AGM is produced for execution at any point in the operation However each phase of the operation may have its own matrix To synchronize lethal and nonlethal fires all attack systems including MISO IO CO and EA are placed on the AGM The AGM consists of the following elements see Table IV-5 Example of Attack Guidance Matrix 1 High-Payoff Target – A prioritized list of HPTs identified during war gaming 2 When – Indicates when to attack each target set 3 How – Links the weapon system to the HPT 185 4 Effect – The desired effects on the target or target system 5 Remarks – Remarks restrictions limitations and or SPINS such as BDA requirements and additional coordination requirements Table IV-7 Example of Attack Guidance Matrix For additional information on attack guidance see FM 3-60 The Targeting Process Chapter 2 The Targeting Methodology 6 Targeting Synchronization Matrix a The TSM synchronizes targeting by assigning responsibilities to detect deliver and assess attacks on specific HPTs The HPT is listed in priority by category under the DECIDE column Units and agencies are listed under the DETECT DELIVER and ASSESS columns across from the specific HPT for which they are responsible As responsibilities are fixed the asset envisioned to be used is also indicated This provides the targeting working group the checks to ensure all assets are used and assets or agencies are not overtaxed This form could also be prepared for a specific event or for each phase of the battle See Table IV-6 Targeting Synchronization Matrix b Both nonlethal and lethal assets may be included in the same matrix 186 Table IV-8 Targeting Synchronization Matrix For additional information on TSM see FM 3-60 The Targeting Process 7 Delivery Standards Matrix a The delivery standards matrix provides criteria for the attack of HPTs in each phase of the operation It also facilitates objective decision-making for attacking targets at the lowest level possible When HPTs are identified they are automatically engaged if they meet the criteria established by the matrix See Table IV-9 Delivery Standards Matrix b The matrix provides instructions for each HPT for all phases of the operation related to the following 1 TLE 2 Size of the target 3 Target activity 4 Time of acquisition 187 Table IV-9 Delivery Standards Matrix For additional information on the delivery standards matrix see FM 3-60 The Targeting Process Appendix D Example Formats and Target Reports 8 Time-Sensitive Targeting Decision Matrix a The JFC’s objectives intent and guidance should be clear and concise while being detailed enough to allow formulation of a TST decision matrix for graphical display to facilitate rapid decision making A TST decision matrix allows subordinate commanders to quickly reference the JFC’s intent for each TST type function and take immediate appropriate action see Table IV-8 Notional Time-Sensitive Target Decision Matrix A decision matrix is a tool not a substitute to assist personnel in fully understanding the underlying TST guidance ROE CID and TST operating procedures that form the matrix The TST decision matrix framework should include the following 1 TST priority 188 2 Target type function 3 Desired effect 4 Assigned approval authority 5 Acceptable risk level Table IV-10 Notional Time-Sensitive Target Decision Matrix b The JFC objectives and guidance set a basic procedural framework for components to expedite operations against TSTs Components do not need to consult the JFC for every target determined to be a TST Once this guidance is stated the components establish planned and reactive procedures for finding fixing tracking targeting and engaging the prioritized TSTs An assessment must be conducted to confirm TST engagement results Component responsibilities may include the following 1 Identify and assign primary sensors and weapon systems to support TST attacks and CA 2 Establish planned and deconflicted FSCMs against specific TSTs 189 3 Define TST engagement authority based on the component commander’s OA assigned functional mission or a combination thereof 4 Identify specific communication data links between component C2 elements of the joint force to conduct rapid TST attacks This normally includes authorizing direct liaison and coordinating authority 5 Conduct an assessment to confirm engagement results For additional information on the TST decision matrix see MTTP for Dynamic Targeting ATP 3-60 1 FM 3-60 1 MCRP 3-16d NTTP 3-60 1 and AFTTP 3-2 3 9 Target Report When targeting information is passed from one agency to another all essential information must be included to allow proper analysis and attack Although there are no formal formats for this information the sample format below provides enough information to properly formulate the best attack response See Table IV-9 Target Report Table IV-11 Target Report For additional information on target reports see FM 3-60 The Targeting Process Appendix D Example Formats and Target Reports 190 SECTION B AIR COMPONENT INPUTS JOINT AIR TASKING CYCLE 1 General a The joint air tasking cycle is used for the efficient and effective employment of available joint air capabilities forces It provides a process for the planning coordination allocation and tasking of joint air missions sorties within JFC guidance See Figure IV-3 Joint Air Tasking Cycle The cycle accommodates changing tactical situations or JFC guidance as well as requests for support from other component commanders A timely joint ATO is critical as other joint force components conduct their planning and operations based on a prompt executable joint ATO and they are dependent on its information Much of the day-to-day joint air tasking cycle is conducted through an interrelated series of information exchanges and active involvement in plan development target development and air execution through designated component LNOs or messages which provide a means of requesting and scheduling joint air missions Figure IV-12 Joint Air Tasking Cycle 191 b The cycle begins with the JFC’s objectives incorporates guidance during JFC and component coordination and culminates with CA of previous actions The ATO articulates the tasking for joint air and space operations for a specific time period normally 24 hours Detailed planning normally begins 72 hours in advance of the execution period to enable the integration of all component requirements The net result of this tasking process is a series of ATOs and related products in various stages of progress at any time A typical joint air tasking cycle snapshot in time reveals the following 1 At least one ATO undergoing assessment at various levels 2 An ATO currently being executed 3 An ATO currently in production 4 An ATO in planning target development and weaponeering 5 An ATO in strategy development guidance and objectives c The full ATO cycle from JFC guidance to the start of ATO execution is dependent on the command procedures A 72-hour ATO cycle starting from guidance and ending after a 24-hour execution period is fairly standard The precise time frames for the joint air tasking cycle must be specified in the OPLAN or the JFACC’s JAOP Long-range combat air assets positioned outside the theater but operating in the JOA may be airborne before ATO publication execution These assets require the most current draft ATO information and updates as required Intertheater air mobility missions may not necessarily operate within an established ATO cycle The JAOC’s CPD should consider how these and intratheater air mobility missions are integrated into the ATO d The ATO matches specific targets compiled by the JFACC with the capabilities forces made available to the JFACC for the given ATO day Other component air missions that appear on the ATO are not under the control of the JFACC but their presence on the ATO provides visibility to assist overall coordination and deconfliction For additional information on the joint air tasking cycle see JP 3-30 Command and Control of Joint Air Operations 2 Air Tasking Order a Purpose The ATO is used to task and disseminate to components subordinate units and C2 agencies projected sorties capabilities or forces to targets and specific missions It normally provides specific instructions to include call signs targets controlling agencies etc as well as general instructions The ATO may subsume the ACO and SPINS or these may be published as separate orders The 192 ATO production team relies primarily on TBMCS tools to produce and publish the joint ATO b Production ATO production consists of developing publishing and disseminating the daily ATO which tasks air capabilities in accordance with the MAAP Two primary tasks within production are technical production and distribution of the ATO ACO and associated SPINS ATO production translates the MAAP into executable air missions that are assigned to subordinate and supporting commanders The ultimate goal is timely development and transmission of an accurate ATO so those executing the missions have the time they need for detailed planning 193 Figure IV-13 Notional Joint Air Tasking Cycle Timeline 194 Figure IV-14 Joint Air Tasking Cycle Battle Rhythm c Air Operations Directive The AOD is an air component document similar to a FRAGORD The daily AOD gives planners the priority of effort operational constraints and any other specific guidance governing the planning execution of air and space operations during a particular ATO period Airspace personnel should review the AOD to gain an overall view of what airspace requirements the ATO development created and to understand daily priorities for airspace deconfliction In addition the AOD may have specific guidance references for the airspace i e plan for high value airborne asset retrograde procedures due to threat The AOD translates the JFACC’S JAOP into guidance for the planning and execution of a specific ATO The JFACC uses the AOD to express the intent for a specific day and communicates the JFC’s apportionment decision Apportionment guidance should reflect prioritized operational objectives and relevant tactical tasks with approximate weights of effort for each objective Specific weights of effort should be avoided to allow maximum flexibility in planning the application of airpower 195 1 The AOD along with the space and cyberspace operations directives where appropriate is the primary vehicle for communicating desired effects to target developers and others involved in the tasking process The Air Operations Center Strategy Division AOC SD drafts the AOD for JFACC approval In a normal battle rhythm this is done on a daily basis By outlining desired effects in the AOD target developers within the JAOC’s Intelligence Surveillance and Reconnaissance Division ISRD gain the flexibility to identify and nominate the most effective means to create the desired effects Conversely target-based AOD guidance can reduce target selection flexibility and resulting in the inefficient use of resources Robust logical desired effects with appropriate MOEs and ISR collection requirements CRs are a necessary part of the AOD 2 The AOD should also be used to express the JFC’s and JFACC’s guidance regarding TST target categories target sets what the priority is among them and what conditions would cause preplanned missions to be retasked Categories of TSTs HVTs and other objects of dynamic targeting should be presented in the context of the desired effects and those desired effects prioritized against the desired effects for preplanned targets Other divisions in addition to the Combat Operation Division COD have important roles to play in dynamic targeting The SD for instance must capture macro-level targeting guidance to include component priorities in the daily AOD Many items in the AOD like commander’s intent anticipated weapons available ROE acceptable risk levels and elements of the ISR collection plan may be vital This allows the COD to rapidly assess the value of preplanned targets against TST or emerging targets to determine whether or not to re-task assets This guidance also reduces the possibility of all newly detected targets being struck Just because a target can be engaged within the ATO execution period does not mean that effort should be diverted from preplanned targets to engage it 3 While daily guidance is critical to subsequent ATOs the SD’s strategy plans team also works on long-range planning including the analysis of branches and sequels Conclusions drawn from this analysis should be disseminated throughout the JAOC to assist in focusing future target development and intelligence collection efforts 4 Finally the AOD should include the JFACC’s guidance on which targets or target sets require immediate assessment feedback ISR collection assets are usually limited in number and the CRs for target development JIPOE I W 196 and other taskings may have a higher priority than CA A focus on a select few high-priority targets or sets for assessment aids JAO efficiency e Special Instructions SPINS are a separate instruction or section of the ATO that provides information that is not otherwise available in the ATO but is necessary for its implementation It includes such information as JFCs’ guidance often including the AOD itself the C2 battle management plan ROE PR procedures the communications plan and general instructions for inter- and intra-theater airlift It may also include the ACO f Airspace Control Plan The ACP establishes procedures for the ACS in the JOA The JFC approves the ACP To provide effective operational procedures the ACP and AD plan must be integrated with the JFC’s operation plans and orders Both plans should complement available C2 systems and capabilities The ACP must consider procedures and interfaces with the international or regional air traffic systems necessary to effectively support air operations Because the airspace control area normally coincides with AD boundaries coordination between combat zone airspace control and area AD operations is essential The ACP is a directive for all joint force elements using the airspace to include manned and unmanned aircraft and indirect fires Implementation of the ACP begins with the distribution of the ACO and is executed when components and users comply with the ACO as described in JP 3-30 Command and Control for Joint Air Operations The ACP establishes the ACS the control nodes and airspace procedures g Airspace Control Order The ACO is an order that implements specific control procedures for established time periods based on the general guidance contained in the ACP that provides the details of the approved requests for ACM It defines and establishes airspace for military operations as coordinated by the ACA It notifies all agencies of the effective airspace activation time composite structure of the airspace to be used and the altitudes distances and the controlling agency for all ACMs The ACO may include airspace coordination measures ACMs and FSCMs such as air routes base defense zones coordinating measures lines drop zones pickup points restricted areas etc and any other pertinent airspace information deemed necessary by the airspace control authority ACA to limit fratricide and maximize combat effectiveness 1 The ACO will be published either as a part of the ATO or as a separate document The ACO message is a jointly approved message developed by the airspace management control team in the JAOC and published by the ACA A change to the ACO should be distributed whenever a new area is established or an existing area deleted 2 The ACO is executed during ATO execution and can be updated with additions changes or deletions as needed All air missions are subject to the ACO It provides direction to deconflict coordinate and integrate the use of airspace within the OA This does not imply the level of command authority over air assets The methods to accomplish deconfliction coordination and 197 integration range from positive control of all air assets in an ACA – to procedural control of all such assets with any effective combination of positive and procedural control between the two extremes The JFACC through the ACP will determine the appropriate method based on the JFC’s CONOPS h Airspace Control Means Request The airspace control means request ACMREQ message is a jointly-approved message used to request a specific airspace control measure or to identify relevant information that should be included in the ACO The ACMREQ will allow the originator to request that a defined block of airspace be designated as having special significance for air operations Requested control measures are deconflicted from other users by airspace management control team personnel and published in the ACO When procedural ACMs are established they reserve airspace for specific airspace users restrict the actions of airspace users control the actions of airspace users or require airspace users to accomplish specific actions i Cycle Inputs A number of inputs are required prior to initiating the ATO cycle Once these inputs are available the ATO production workflow begins Specific actions at predetermined times ensure ATO production remains on schedule within the established timing cycle Figure IV-4 Notional Joint Air Tasking Cycle Timeline identifies the steps required to produce an ATO while Figure IV5 Multiple Air Tasking Order Production Rhythm Notional depicts a notional multi-ATO rhythm ATO production team required inputs include the following 1 JIPTL from the targeting cell in TBMCS this is also known as the TNL 2 ACMs from the airspace management cell 3 Friendly order of battle data time permitting initially established during contingency planning otherwise during CAP 4 MAAP developed daily ABP from mission planning worksheets or MAAP Toolkit 5 SPINS inputs 6 Airlift missions ready for import by airlift import manager For additional information on the C2 of JAO throughout the range of military operations refer to JP 3-30 Command and Control for Joint Air Operations 198 APPENDIX A 1 INTELLIGENCE ORGANIZATIONS THAT SUPPORT TARGETING Intelligence Support Architecture a At the JFC level production focuses on the fusion of intelligence from all sources CCMD JIOCs possess organizational processes to integrate and synchronize military national operational and tactical intelligence capabilities to increase intelligence fidelity and timeliness of dissemination to warfighters and to decrease duplication of effort by intelligence centers b The CCMD JIOC is the primary intelligence organization providing intelligence to joint forces at the operational and tactical levels The JISE is the JFC J-2’s focal point for multidisciplined all-source collection production analysis and dissemination The JISE utilizes reach-back capabilities to the CCMD JIOC and the Defense Joint Intelligence Operations Center c Utilizing federated partnerships a JFC receives its principal intelligence support from the CCMD’s JIOC which receives information from all echelons and performs all-source analysis and production d The Intelligence Community IC The IC consists of 17 member organizations DIA National Security Agency NSA National Geospatial-Intelligence Agency NGA National Reconnaissance Office Army Intelligence Navy Intelligence Air Force Intelligence Marine Corps Intelligence Central Intelligence Agency CIA Department of State DOS Department of Energy DOE Federal Bureau of Investigation Department of the Treasury Coast Guard Intelligence Department of Homeland Security DHS the Drug Enforcement Administration DEA and the Office of Director of National Intelligence DNI Both DOD and non-DOD members of the IC routinely provide support to JFCs while continuing to support national decision makers e The following paragraphs contain information on the organizations that may provide expertise for federated intelligence support to targeting and allow access to more actionable information than would otherwise be available to JFC 2 Joint Staff J-2 Deputy Director for Targeting a The JS J-2 is a unique organization in it is a both a major component of the DIA which is a combat support agency CSA and a fully integrated element of the JS The J-2 provides continuous intelligence support to the CJCS JS National Military Command Center and CCMDs in the areas of targeting global warning intelligence and current intelligence b The JS J-2 Deputy Director for Targeting J-261 functions as the lead agent for providing and coordinating national-level intelligence support to joint targeting Specific J-261 responsibilities include 199 1 Providing CJCS and JS J-3 with targeting assessment and technical support during contingency and CAP 2 Providing the CCMDs if requested and validated with IC target development through all phases of the targeting cycle 3 Assisting the CCMDs in establishing coordinating or supporting federated intelligence operations to include target development and assessment 4 Assisting CCMDs with coordination of IC target vetting 5 Providing functional expertise on targeting and targeting-related issues undergoing JS SecDef and Presidential review This includes but is not limited to command target lists planning orders warning orders and STAR products For additional information see JP 2-0 Joint Intelligence 3 Defense Intelligence Agency The DIA is an intelligence CSA under the SecDef and is also a member of the national IC The Director DIA reports to the SecDef through the CJCS The DIA’s mission is to satisfy the military and military-related IRs of the SecDef and the Deputy SecDef the CJCS and the DNI and provide the MI contribution to national foreign intelligence and counterintelligence Analysts across the agency directly support targeting efforts by performing all-source target development material production TSA and assessment 4 National Joint Operations and Intelligence Center The National Joint Operations and Intelligence Center NJOIC is an integrated JS J-2 J3 J-5 element that monitors the global situation on a continual basis and provides the CJCS and SecDef a DOD planning and crisis response capability The intelligence component of the NJOIC maintains an alert center that consists of the Deputy Director for Intelligence regional desks corresponding to each geographic CCMD and representatives from each Service intelligence staff element the intelligence CSAs and the CIA The alert center is a continuously manned all-source multidiscipline intelligence center providing defense intelligence SA I W and crisis management intelligence support 5 National Security Agency Central Security Service The NSA Central Security Service CSS is a unified organization structured to provide for the SIGINT mission of the US and to ensure the protection of national security systems for all departments and agencies of the USG The NSA CSS provides critical intelligence support to all phases of joint targeting This support includes analysis of communications networks or other aspects of the information infrastructure as well as operational SIGINT The NSA is also an intelligence CSA under the SecDef and is dualtasked as a member of the national IC under the DNI The NSA provides direct 200 cryptologic and cyberspace support to the CCMD JIOCs through the CSS comprised of the Service cryptologic components and cyberspace support element respectively The NSA CSS is also responsible for providing the CCMD JS J-2 and NJOIC with the intelligence gain or loss assessment which is an evaluation of the quantity and quality of intelligence data lost if desired effects are created on a target The NSA CSS will keep the NJOIC CCMD JIOCs and other interested commands and agencies informed of agency activities that take place in each respective CCDR’s AOR or subordinate JFC’s OA 6 National Geospatial-Intelligence Agency By law the NGA is a CSA as well as a national intelligence organization and is directly subordinate to the SecDef and the Under Secretary of Defense for Intelligence The NGA is the primary source for GEOINT analysis products data and services at the national level In addition to the GEOINT support identified in JP 2-01 Joint and National Intelligence Support to Military Operations the NGA’s mission supports national and homeland security defense policy and force structure advanced weapons and systems development and natural disaster relief The NGA is the primary provider of positioning and navigation services to the DOD and the IC Since the NGA disseminates data and standard products and makes them available in repositories GEOINT-trained personnel throughout much of the IC including military personnel in the field can access the data to develop their own GEOINT analysis and nonstandard products The NGA serves as the DOD lead for all acquisition or exchange of commercial and foreign government-owned imagery-related remote sensing data for DOD components For additional information on NGA target support products and services see JP 2-03 Geospatial Intelligence Support to Joint Operations and JP 3-60 Joint Targeting 7 Defense Threat Reduction Agency DTRA provides special tools and expertise on WMD and helps safeguard the US and its allies by providing capabilities to eliminate reduce and or counter these threats and or mitigate their effects DTRA’s work covers a broad spectrum of activities but is directly involved in the targeting process by making collateral damage and casualty estimations when employing weapons against facilities that may contain WMD DTRA also provides target characterization and high-fidelity weapons effects modeling to support physical and functional defeat of hardened and deeply buried targets DTRA also verifies existing foreign controls of stockpiles of nuclear-related equipment and materials 8 Joint Information Operations Warfare Command The Joint Information Operations Warfare Command JIOWC is a CJCS-controlled activity reporting to the J-3 via the JS Deputy Director for Global Operations The JIOWC supports the JS by ensuring operational integration of IRCs in support of IO improving the DOD’s ability to meet CCMD IRC requirements as well as developing and refining IRCs for use in support of IO across the DOD The JIOWC’s specific organizational responsibilities include 201 a Supports the integration of OPSEC MISO MILDEC EW and destruction throughout the planning and execution phases of an operation b Interfaces with the JS Services DOD and non-DOD agencies to coordinate and integrate IO efforts for the JFC c Provides full spectrum IO to include human influence targeting support that can be tailored for integration into TSAs d Provides IO SMEs and advice to the JS and the CCMDs e Develops and maintains a joint IO assessment framework f Assists the Joint Information Operations Proponent in advocating for and integrating CCMD IO requirements g Upon the direction of the Joint Information Operations Proponent provides support in coordination and integration of DOD IRCs for JFCs Service component commanders and DOD agencies h Assists with strategic IO planning and theater engagement 9 Joint Warfare Analysis Center The JWAC provides the JS CCMDs JFCs and other DOD and non-DOD agencies with precision targeting and deterrent options for selected networks and nodes The JWAC conducts engineering and modeling analysis fused with scientific and intelligence data to produce optimized target sets that support the JFC’s objectives As such the JWAC is a key provider of information supporting target development and assessment It may also be a key provider of unique weaponeering cases and CDE analysis 10 Joint Technical Coordinating Group for Munitions Effectiveness The JTCG ME is a vital joint service activity that develops operational effectiveness estimates for all non-nuclear munitions and munitions effective miss distance tables that contain collateral damage distances for all air-to-surface and surface-to-surface conventional munitions The JTCG ME continuously updates JMEMs used by the Services for training and tactics development operational targeting weapons selection aircraft loadouts and planning for ammunition procurement survivability and development of improved munitions The JTCG ME directs the analytical effort of working groups necessary to determine degrading effects of various terrain environments on non-nuclear ME and improving the database for target vulnerability delivery accuracy and weapons characteristics 11 National Air and Space Intelligence Center 202 The National Air and Space Intelligence Center NASIC is an Air Force organization that assesses foreign air and space threats The NASIC can provide deployed forces with unique aerospace intelligence capabilities for DOD operational commands research and development centers weapon acquisition agencies and national planners and policymakers In collaboration with other IC elements the NASIC’s Counter Space Operations Cell provides foreign counterspace threat intelligence supporting military operations and serves as the primary NASIC focal point for operational defensive counterspace support As such the NASIC is seen as the “all-source intelligence integrator” for intelligence relating to suspected purposeful interference and EA affecting DOD and USG space systems 12 Non-Department of Defense Supporting Intelligence Organizations a Non-DOD organizations provide significant intelligence and operational support to joint targeting The principal non-DOD organizations supporting joint targeting are the CIA and DOS b Central Intelligence Agency Through its target support group TSG within its Office of Military Affairs OMA the CIA works closely with the DOD on many issues relating to every phase of the targeting cycle The TSG makes a variety of CIA resources available to military target planners The CIA can provide target systems analysis of communications system and intelligence WMD and counterterrorism Additionally in peacetime applicable requests for information are routed to the CIA to be addressed by the agency’s OMA The TSG provides information and expertise in support of military target development and processes formal requests for target nominations review and approval by the CIA’s leadership to add CIA-selected targets to a DOD plan TSG manages all military STO and Special Access Program compartments and deconflicts military targeting with CIA operational assets In a crisis or war CIA personnel or teams can be attached to CCMDs JFCs or joint force components as required c Department of State Bureau of Intelligence and Research The central point of contact within the DOS for intelligence analysis and research is the Bureau of Intelligence and Research INR The INR produces intelligence studies and analyses which have provided valuable information in support to targeting As the lead foreign affairs agency and the enabler of US diplomacy the State Department has a unique perspective on the nations of the world All-source reporting via Foreign Service channels at American embassies or consular posts has also proven useful particularly during the objectives and guidance target development and CA phases of the targeting cycle Intelligence concerning political and military leaders cultural trends and thoughts and economics can provide intelligence that ties military strategy to the entire spectrum of national power Such intelligence can enhance understanding of adversary motivations helping to influence or bend them to our will 203 APPENDIX B JOINT AND SERVICE COMMAND AND CONTROL SYSTEMS 1 Theater Air-Ground System a The TAGS is a system of systems a synergy of the various component air-ground systems orchestrating the planning and execution of air-ground operations see Figure B-1 Theater Air Ground System When all elements of the Air Force’s TACS AOC Army air-ground system AAGS Navy’s CWC naval tactical air control system NTACS Marine air command and control system MACCS with FSCC hierarchy and special operations air-ground system integrate the entire system is labeled the TAGS Technology has improved the JFACC’s ability to command and control joint air power The speed of modern warfare as well as the precision of today’s weapons dictates close coordination in the OA among the JFC’s components The JFACC must ensure all elements of the TAGS are in place and the various liaison positions are filled prior to or as soon as possible after the start of an operation or campaign b Actions at the joint force level establish the requirements for the TAGS including the GCC’s guidance perspective and strategy for the AOR They also establish the JFC’s JOA strategy command organization and relationships the campaign plan assignment of objectives and apportionment of forces It is important that personnel assigned to or working with the TAGS understand the decision processes and problems associated with the operational and tactical levels of command Armed with this knowledge commanders and staffs will better understand the TAGS functions and how to work within the system to receive or give support c Simultaneous joint operations with different end states can be conducted within a GCC’s AOR The effectiveness of the TAGS facilitates the JFC’s ability to integrate synchronize and direct joint operations d From a TAGS perspective targeting directly affects the preparation of the ATO For the TAGS to work effectively the joint targeting process and the joint ATO cycle must be synchronized Personnel working ATO development must understand the targeting process to fully realize its impact on the TAGS e The TAGS is critical to Army operations because it provides the commander with a system that integrates the different Services’ air-ground systems TAGS functions cross the full range of military operations and provide ground commanders with an enhanced capability to fight the close deep and rear battles The TAGS facilitates success in COPS while allowing ground commanders to shape the OE to influence future operations Army commanders expect the TAGS to provide the framework to synchronize supporting air operations with the ground effort The ability of the commander’s FSC G-3 Air and ALO to work closely together in all aspects of planning synchronizing and executing operations is critical to the ground battle’s success 204 f The JFC will organize the joint force to maximize the TAGS capabilities in support of air-ground planning targeting tasking execution and CA The JFC also influences the structure and the direction of the TAGS in several ways to include designating a JFACC ACA and AADC assigning missions and apportioning forces The basic duties and responsibilities of the components in performing JFACC ACA and AADC capacities remain the same regardless of whether the commander of the MARFOR Navy forces NAVFOR or AFFOR performs the function However as explained the MARFOR and NAVFOR JAOC capacity is limited and this has a direct bearing on the size of liaison elements g Component C2 elements are combined to form the TAGS Joint force components must work together in planning and executing JAO that accomplish JFC-assigned objectives comply with JFC guidance and satisfy various component commanders’ requirements The challenge to personnel working within the TAGS is to operate a system responsive to all components and supported echelons to accomplish the JFC’s campaign objectives 205 Figure B-1 Theater Air Ground System 206 2 Army Air-Ground System a The Army’s control system for synchronizing coordinating and integrating air operations with the commander’s scheme of maneuver is the AAGS The AAGS initiates receives processes and executes requests for air support and disseminates information and intelligence produced by aerial assets Although some elements within the AAGS such as the TACP belong to different Services or other nations they function as a single entity in planning coordinating deconflicting and integrating air support operations with ground operations The Army elements of the AAGS consist of operations fire support AD C2 and coordination liaison elements b The AAGS is used for synchronizing coordinating and integrating airspace users air and missile defense fires and other warfighting functions with the Army ground commander’s scheme of maneuver Although some elements supporting the AAGS such as the TACP ASOC air naval gunfire liaison company belong to different Services or other nations they function as a single entity in planning coordinating deconflicting and integrating air support operations with Army ground operations Coordination between the TACS and the AAGS includes the BCD in the AOC and the ACCE at the Army component commander’s HQ 3 Air Force Theater Air Control System a The COMAFFOR exercises command authority as defined by the JFC COMAFFOR may be assigned responsibilities as a JFACC ACA or AADC The COMAFFOR plans coordinates and executes AFFOR air operations and other assigned responsibilities through the component TACS which allows the required centralized planning and control and decentralized execution previously discussed The AFFOR staff normally functions within the Air Force component TACS If another component has JFACC responsibility the COMAFFOR retains Service component responsibilities which also would be accomplished through the TACS The TACS is the backbone of the AFFOR’s contribution to the TAGS and consists of units specifically trained and equipped to support the C2 process The TACS is designed to perform centralized planning and control and to facilitate decentralized execution It consists of airborne and ground elements to conduct tailored C2 of air and space operations throughout the range of military operations including AD airspace control and coordination of space mission support not resident within theater The elements that form the TACS are the Air Force AOC other separate agencies liaisons and C2 b Air Force contributions to the TAGS are threefold First AFFOR participate in gaining control of the air environment and conduct other missions and support activities throughout the theater for the JFC as a whole Second AFFOR plan coordinate and assist in control of air missions to achieve JFC-assigned air operations objectives Third AFFOR produce a communications system that enables the control of assets By exchanging liaison elements with other 207 components the COMAFFOR can contribute to a comprehensive and unified air operation Effective liaison is the key to planning and coordinating TAGS activities 4 Navy Tactical Air Control System a Naval forces provide strike aircraft and Tomahawk Land Attack Missiles TLAM from surface and subsurface platforms to attack targets These resources are provided to the TAGS as directed by the JFC Naval carriers and land-based aircraft are equipped and manned with trained personnel to perform all types of air-to-ground missions including CAS and AI Ships and aircraft that are part of the naval force are an integral part of Air Defense AD and airspace control of the JOA b The principle warfare commanders involved in airspace control are the area air defense commander AADC who is normally located on an AEGIS cruiser destroyer and the Strike Warfare Commander STWC The STWC is responsible to the CWC for planning directing monitoring and assessing maritime power projection ashore and may be responsible for striking surface targets at sea at extended ranges from the strike group The STWC normally exercises TACON of assigned strike warfare capable assets Typically the STWC does not plan or direct TLAM missions The STWC integrates or coordinates carrier air wing resources with TLAM missions via the launch area coordinator and Tomahawk strike coordinator The STWC coordinates naval surface fire support NSFS missions via the NSFS coordinator The STWC and his staff have the greatest interface with other TAGS agencies and organizations during ATO execution c The Navy also utilizes airborne C2 nodes Those nodes include the E-2C D Hawkeye which can provide similar services as Airborne Warning and Control System Joint Surveillance Target Attack Radar System JSTARS or USMC direct air support center airborne Tactical support centers are located at principal P-3C and P-8A aircraft deployment sites The tactical support center provides for a permanent reliable command and control integration support system from airbases dedicated for maritime patrol aircraft MPA operations during peacetime contingencies or full mobilization The tactical support center provides the maritime component commander MCC with the facilities and capabilities necessary to plan direct and control MPA operations in the assigned AOR d The primary air control system agency afloat during amphibious operations within an amphibious objective area AOA is the Navy tactical air control center TACC The Navy TACC possesses the functionality of future plans and COPS and can develop and disseminate an ATO and ACO During amphibious operations the Navy TACC coordinates the types of ACMs and controls all air operations within the OA until a land-based air control agency is established ashore Once a land-based air control agency receives control of all LF air 208 operations the Navy TACC may become a tactical air direction center TADC supporting the land-based air control agency Subordinate TADCs as designated monitor air control circuits in readiness to assume all or part of the duties of the air control agency if necessary or are established to control air operations during advance force operations when a fully operational TACC cannot be justified The NTACS and the MACCS are parallel organizations which accomplish the same functions at different times during amphibious operations e The Marine TADC is established early on in the amphibious operation During this time while overall control of aviation assets remains afloat the Marine TADC is subordinate to the Navy TACC When airspace management functions are passed from afloat to ashore the Marine TADC assumes the title and responsibilities of the Marine TACC The Navy TACC then may become a TADC in support of the Marine TACC f Both the Navy and the Marine Corps air control systems are capable of independent operations however in the conduct of an amphibious operation elements of both systems are used to different degrees from the beginning of the operation until the control is phased ashore Under the amphibious task force ATF commander the TACC typically on board the amphibious assault ship general purpose LHA or amphibious assault ship multipurpose LHD will normally be established as the agency responsible for controlling all air operations within the allocated airspace regardless of mission or origin to include supporting arms As the operation progresses the commander landing force CLF having the capability to control air operations may establish C2 systems ashore and incrementally accept responsibility for various C2 functions from the ATF commander When full capability is achieved the CLF may assume full air control responsibility from the ATF commander i e Navy TACC In some cases it might be neither necessary nor desirable to transfer authority ashore As the amphibious operation proceeds C2 of aviation operations is transitioned ashore as MACCS agencies are established on the ground g Ashore the maritime operations center MOC provides the commander numbered fleet commander NCC or JFMCC with a functionally organized staff and C2 systems to include collaborative air planning tools such as the TBMCS Operational level air planning occurs in the MOC The MOC conducts planning for naval strike AI TLAM NSFS missile defense maritime patrol and reconnaissance aircraft operations and PR missions 5 Marine Corps Air Command and Control System a The MACCS provides the ACE MAGTF commander with the means to command coordinate and control air operations It provides a robust air C2 capability and is capable of supporting AD and airspace management functions within the framework of joint and multinational operations The MACCS is tasked to meet the MAGTF’s air C2 needs It varies in size from small air support elements and Marine air traffic control detachment mobile teams typically 209 deployed with a Marine expeditionary unit to a fully functional MACCS used in MEF-level operations b The principal C2 agencies of the MACCS include the following 1 TACC includes future operations and plans COPS TADC 2 Tactical air operations center TAOC 3 Marine Corps direct air support center DASC 4 Maritime air traffic control detachment 5 Low-altitude AD battalion 6 Terminal control agencies for direct air support c The TACC is the senior MACCS agency and the one MACCS agency that exercises command It serves as the ACE commander’s operational command post The TACC provides the facility from which the ACE commander and the battle staff plan supervise coordinate and execute all current and future MAGTF air operations The TACC has the capability to plan produce and execute an ATO or ACO d During amphibious operations the Marine TACC functions as a TADC subordinate to the Navy before the transfer of control ashore When the MAGTF assumes control of all air operations within an AOA the TADC transitions to the Marine TACC e The TACC is equipped with TBMCS equipment and possesses the communications systems necessary to host JAOC functions and usually does so in an enabling or transitional role The intention in such instances is to pass these functions to a more robust air C2 agency as the tempo of air operations increases As is the case with all JAOCs Service liaisons and SMEs that reflect the makeup of the joint force are necessary to staff a TACC-hosted JAOC f The TAOC provides safe passage radar control and surveillance for CAS aircraft en route to and from target areas Until the Marine TADC or Marine TACC is established ashore the TAOC normally reports to the Navy TACC The TAOC or elements thereof typically deploy with the land elements of a Marine expeditionary brigade MEB or a MEF The TAOC’s capabilities incrementally increase as the size of the land force component increases i e MEB or MEF size land force g The DASC is the principle agency within the MACCS responsible for control and direction of air operations directly supporting ground forces Based upon the tactical situation the DASC is normally located with either the senior ground 210 command element GCE FSCC or the MAGTF FFCC The DASC assigns direct air support aircraft to terminal control agencies provides aircraft ingress and egress route instructions and disseminates advisory information When control is afloat the Navy TACC supervises the DASC’s operations When control is ashore the Marine TADC or Marine TACC supervises the DASC’s operations The DASC uses procedural control methods to control airspace users During amphibious operations it normally is the first major air control agency ashore landing and co-locating with the GCE’s senior FSCC h The TACP tactical air coordinator-airborne forward air controller-airborne and assault support coordinator-airborne all provide procedural airspace control The Maritime air traffic control detachment provides positive airspace control and air traffic control services 6 Special Operations Airspace Control SO airspace integration and deconfliction issues are worked in the JAOC by members of the special operations liaison element SOLE There also are SO airspace managers in the joint special operations air component JSOTF and joint SO air detachment that coordinate airspace issues through the SOLE 211 APPENDIX C 1 JOINT FIRES NETWORKED SYSTEMS Advanced Field Artillery Tactical Data System a Introduction The Advanced Field Artillery Tactical Data System AFATDS is a fully automated command control and communications system that prioritizes targets and pairs them with optimal fire support weapon systems It gives commanders timely accurate and coordinated fire support to prioritize and engage targets The AFATDS can execute as a completely automated system but allows for human intervention whenever necessary or at optional points The system does not force current doctrine but supports it Configurable commanders’ guidance is factored into each mission Tailorable rule sets are available for target processing weapon pairing information distribution and communications redundancy The AFATDS supports planning execution movement control artillery mission support field artillery FA fire direction operations and target analysis and engagement b Unit relationships are user-configurable to adapt to changing needs and force structure The system provides agility allowing for the establishment of the sensor-to-shooter link while enforcing mission coordination requirements The AFATDS provides critical SA Both friendly and enemy unit graphics are displayed along with target information from multiple sources Due to multi-level communications across the network unit status and weapon platforms are monitored and updated continually on the map Information may be directly accessed from the map symbols Friendly and enemy units targets and OAs can all be seen Each AFATDS workstation may filter the information to be displayed allowing the commander to monitor the dynamic current situation missions processing through the system and target updates from a unique perspective c Planning The planning function within the AFATDS allows for detailed planning and COA analysis by projecting friendly and enemy positions guidance specific to the plan and a task organization for the plan In order to assist with the planning function an enemy template tool is provided A system tool supports multi-phase maneuver COAs and can compare and recommend the best COA considering commander’s priorities Plans can be easily disseminated The planning activity does not affect the current situation until the operator implements the plan Plans are implemented into current by phase – this immediately updates the unit task organization guidance geometry and target database to reflect changes d Fire support planning provides integration of FA mortars NSFS aviation helicopters and air support into the force commander’s scheme of maneuver The AFATDS helps create a fire support annex to the commander’s OPLAN and a FA support plan 212 e Target Analysis and Engagement Target analysis and engagement is a robust aspect of the AFATDS TLM functions allow for copy and merge target duplication checks sorting searching and target data reception and transmission Fire plans and schedules of fires may be generated from lists groups or series targets There is an extensive set of guidance that can be applied e g TSS HPTs decay time target prioritization The fire support system task list alone can contain a 100-rule set of prioritized target to weapon system parings and a prioritized list of commander’s preferences Pre-planned missions can be linked to sensor reports for dynamic targeting The system can deal with many weapons and pair those weapons to targets minimizing the sensor to shooter timeline The system can filter sensor reports so every report does not have to be engaged and the system also selects the best weapon and munition based on target parameters e g environment countermeasures TLE age the munitions required e g effects capability hazard area and weapon status e g response time current mission load ammunition inventory The AFATDS can determine quantities of munitions to achieve a desired target damage effect f The AFATDS mission processing of sensor inputs considers mission value not first in first out The system will filter targets and process missions based on a configurable mission value and precedence The system analyzes cannon mortar rocket ATACMS fixed- and rotary-wing air naval cannon standard missile and Tomahawk as possibilities for weapons It is fully automatic keeps interested nodes appraised of targeting information and coordinates ground and airspace violations spatial coordination is four dimensional including time analysis The system considers commanders’ guidance latest unit status mission history and effects algorithms which determine munition quantity for both guided and unguided munitions During mission processing the operator may view and tailor the system recommendation The intervention display shows all key data and analysis results g Communications The AFATDS is not limited to FA communications but can communicate and exchange data with Army Air Force Marine Corps Navy and NATO systems The AFATDS is interoperable with all fires subsystems including gun display unit artillery fire control systems future combat systems Firefinder Radar Airborne Target Handover System and forward observer system It interoperates with the Army Battle Command Systems suite The system also interoperates with joint level automated systems such as Tactical Airspace Integration System TBMCS JSTARS Ground Control Station and Global Command and Control System GCCS The AFATDS also operates with Allied FA-C2 systems such as the United Kingdom’s Battlefield Artillery Target Engagement System and the German ADLER The AFATDS communications devices include the programmable Tactical Communication Interface Module TCIM or the Serial Personal Computer Memory Card Industry Association Tactical Communications Interface Modem The TCIM enables communication over wire combat net radio mobile subscriber equipment and satellite The system also uses a network-interfaced card to communicate over local area network for SECRET Internet Protocol Router Network SIPRNET Nonsecure 213 Internet Protocol Router Network NIPRNET and Enhanced Position Location and Reporting System operations 2 Joint Automated Deep Operations Coordination System a Introduction The Joint Automated Deep Operations Coordination System JADOCS is a joint warfighting application that provides joint and coalition coordination and approval of dynamic targeting missions It can also be used to build target lists for deliberate targeting It is a widely accepted easy-to-use C2 targeting tool and is deployed worldwide It provides for horizontal and vertical warfighting integration and coordination across joint and functional seams JADOCS incorporates multiple existing system interfaces AFATDS GCCS Air Defense System Integrator JTWC and multiple database interfaces MIDB ATO JTL NSL RTL The component and joint target managers provide for timely dynamic targeting information sharing coordination and C2 within the maritime force and between components for fires during the prosecution of dynamic targets see figure C-1 b JADOCS has a number of managers which can be tailored for exercise OPLAN or real world requirements Some managers are used for different types of dynamic targets target development dynamic ISR personnel recovery PR and humanitarian assistance disaster relief Each component will typically have a component target manager to supplement the joint TST manager 214 JOINT AUTOMATED DEEP OPERATIONS COORDINATION SYSTEM DIGITAL INTERFACES ASAS-L TES Enemy OB Radar Reports ELINT ARMY GCCS-A ADSI TAIS AFATDS 6 8 ATO ACO Dissemination F658 ACM Requests Fire Missions Control Measures Systems Status Q-36 Q-37 Radars Air Tracks AIR FORCE TBMCS NAVY USMC NFCS Fire Missions Control Measures Systems Status Acquisition Radars ATO Nominations ATO ACO Air Operations Database GCCS-M ATO Nominations Weather Overlays JWIS Tracks Unit Reports TBM ELINT BFT Reports WIP CoT PRMS LCMR RAIDER BFT DLARS UAS IPL Imagery ADSI JTT Targeting support JSWS CGS Moving Target Indicator Reports JOINT GCCS-J Tracks Unit Reports TBM ELINT BFT Reports MIDB PFPS AMPS Integrated Intel Database No Strike List Restricted Targets List Routes Overlay C2PC Overlay Legend ACO ACM ATO ADSI AFATDS ASAS-L BFT C2PC CoT DLARS ELINT GCCS-A GCCS-J GCCS-M IPL JSWS CGS JTT air control order Airspace Control Means Air Tasking order Air Defense Systems Integrator Advanced Field Artillery Tactical Data System All Source Analysis System Light Blue Force Tracker command and Control Personal Computer Cursor on Target Data Link Automated Reporting System electronic intelligence Global Command and Control System-Army Global Command and Control System-Joint Global Command and Control System-Maritime imagery product library Joint Services Workstation Common Ground Station joint targeting toolbox JWIS LCMR MIDB NFCS OB PFPS AMPS PRMS RAIDER TAIS TBM TBMCS TES USMC UAS WIP Joint Weather Impact System lightweight countermortar radar modernized integrated database Naval Fires Control System Order of Battle Portable Flight Planning Software Aviation Mission Planning System personnel recovery mission software Rapid Attack Information Dissemination Execution Relay Tactical Airspace Integration System Theater Battle Management theater battle management core system Tactical Exploitation System United States Marine Corps Unmanned aerial system work in process Figure C-1 Joint Automated Deep Operations Coordination System Digital Interfaces c JADOCS includes more than 67 software tools and managers for C2 and fires coordination including 1 Joint time-sensitive targeting and component dynamic targeting coordination management and C2 2 Access to the JTL through the JTT 3 Battlespace awareness 215 4 Real-time awareness of dynamic targets in development 5 Conflict identification of restricted targets planned targets friendly forces and preplanned fire areas 6 Situational awareness of ground forces 7 Joint coordinating measures i e ACMs and FSCMs 8 ISR coordination and management 9 CAS management 10 Certified collateral damage estimation 11 Personnel Recovery PR management 12 Targeting assessment management 3 Modernized Integrated Database a Purpose The Modernized Integrated Database MIDB Data Services Environment is the DOD’s authoritative all-source repository of worldwide general military and targeting intelligence The MIDB information is maintained in support of the CCMDs Services CSAs USG departments and agencies and IGOs The MIDB’s architecture consists of a group of component databases that continuously replicate worldwide between hundreds of nodes on a variety of networks and between different security levels This architecture provides the infrastructure for data exchange between intelligence and operational consumers from the national to tactical levels The MIDB provides a baseline source of intelligence on installations facilities military forces population concentrations C2 structures and equipment in addition to target details Because of the MIDB’s replication architecture and business rules designed to protect data integrity the MIDB is the national database for all target lists NSLs and textual data in ETFs 1 The MIDB is the primary repository for data production and dissemination of MI involving worldwide orders of battle facilities C2 networks targeting BDAs and other related information required for strategic assessments and national policy decision-making This data is maintained and updated by the DIA CCMDs and Services are delegated responsibility to maintain their portion of the database 2 The MIDB is a DOD migration system The DOD is in the process of establishing a simplified baseline of the best common information systems across the business functions of the department These migration systems represent a stage of process improvement designed to achieve a common set 216 of automated processes and practices in the DOD The MIDB expanded upon the basic order of battle equipment and facility holdings of the integrated database to include several legacy systems a Electronic order of battle services b Expeditionary warfare c Military facilities file d TM management e US Central Command US Special Operations Command integrated data system f Force trends database g Force tracking information system h Space database b Users The MIDB serves as the primary repository of intelligence data for the entire DOD community Australia Canada and the United Kingdom c Products Typical MIDB products and outputs include 1 Facility location list by country and category with remarks 2 Facilities with associated units on equipment facility equipment and facility remarks 3 Facility listing BE category sort facilities with associated units equipment and remarks 4 Facility location list by country and category 5 Equipment on-hand quantities by facility and unit name 6 Equipment list by force and primary function 7 Active ground order of battle related facilities by category 8 Facility location list with vulnerabilities and remarks 9 Defensive missile order of battle 10 TMs planning document 217 11 TNL 12 Combined target list d Network Interfaces and Communications The MIDB provides intelligence information from the DIA MIDB to the Global Command and Control System Integrated Intelligence and Imagery GCCS-I3 application The MIDB is a structured relational database Data elements are highly structured in American Standard Code for Information Interchange format Data is replicated between Network Interfaces and Communications MIDB and intelligence shared data server databases sharing the same schema Data sources are DIA tactical message order of battle report imagery interpretation report intelligence report via automated message handling joint message handling system The MIDB repository is available through Intelink to the Department of Defense Intelligence Information System community and through GCCS-I3 to tactical units 4 Joint Targeting Toolbox a Purpose The JTT is the DOD’s targeting system of record It is made up of a suite of software applications that field through the GCCS The JTT and GCCS are hosted on Service command and government agency system environments engineered to support operations and targeting requirements at the strategic theater and tactical level It contains non-duplicative and interoperable applications that support the execution of the entire targeting cycle starting with commander’s objectives guidance and intent to the generation of target lists in support of ATO production execution and CA BDA The JTT rapidly receives correlates manipulates displays and disseminates target intelligence data originating from multiple sources This target intelligence data is integral to the battle planning mission execution and assessment processes The compatibility of the JTT’s applications within the force theater-level environments makes the targeting community seamless collaborative knowledgeable focused decisive correct and responsive b Users The JTT is the joint targeting program of record and fielded DOD-wide It is the primary targeting application for the GCCS that allows “complete targeting interoperability” within the joint community The JTT brings all Services commands and government agencies targeting requirements together in one tool increasing interoperability and collaboration capability c Network Interfaces and Communications The JTT operates in a GCCS environment at the sensitive compartmented information collateral and Multinational Collateral Tier 1 security levels The tools that comprise the JTT rely heavily on data stored in the suite of databases that make up the MIDB Therefore the JTT requires access to the MIDB to operate The JTT requires the WebLogic web application server to operate and is accessed using a web browser e g Firefox FF The correct version of WebLogic and FF required is specified 218 in the load plan for the Global Command and Control System-Joint or Joint Deployable Intelligence Support System version of which the JTT is a part 5 Theater Battle Management Core System a Purpose The Theater Battle Management Core System TBMCS is used by the JFACC and other component commanders to collaboratively plan direct and control JAO in support of JFC objectives This automated system facilitates the development deconfliction dissemination and execution of the air operations plan air tasking order airspace control order and AD tactical operations data message and supports collaborative target management The system provides full support to force-level and unit-level joint forces throughout all phases of military operations and is interoperable with other GIG systems to include the GCCS family of systems and Global Command Support System-Joint Command and Control Integrated Planning System The TBMCS is used by the US Air Force Navy and Marine Corps 1 The operational mission of TBMCS is to provide computer-supported management of theater airborne assets in peacetime exercise and wartime environments TBMCS provides automated C2 and decision-support tools to improve the planning preparation and execution of joint air combat capabilities The tools also provide C2 support for operations other than war e g humanitarian relief and assistance United Nations peacekeeping etc see Figure C-2 Theater Battle Management Core System 219 Figure C-2 Theater Battle Management Core System 2 TBMCS provides tasking for all air assets in the AOR produces the ATO and provides the JFACC with the means to plan direct and control all theater air operations in support of command objectives It also allows the JFACC to coordinate with ground and maritime elements engaged in the same operation Functionalities of TBMCS are used to produce generate disseminate and monitor the execution of the ATO ADP MAAP TNLs JIPTL and ACO In a joint force the JFMCC and forces assigned use TBMCS to make input to the ATO and ACO as well as to parse and support execution of the published ATO b Users TBMCS is a US Air Force program with joint application The US Navy implements a subset of the TBMCS force-level applications aboard command ships amphibious command ship CVNs and large-deck amphibious ships LHA LHD Additionally TBMCS is incorporated into the AADC program on selected CGs TBMCS is also fielded at selected training sites and shore commands Commander United States Pacific Fleet HQ and US Navy Central Command HQ Army BCDs also interface with the TBMCS c Products The TBMCS uses two primary databases the air operations database AODB and MIDB 220 1 The AODB contains the following data a Friendly order of battle b Friendly units c Friendly bases d Components e Standard conventional load configurations f Base inventory g Mission type and aircraft type mappings h Airspace 2 The MIDB contains the following data a Target data b EOB d Network Interfaces and Communications Figure C-3 Theater Battle Management Core Systems Interfaces depicts the TBMCS interfaces e Modernization of the Theater Battle Management Core System The TBMCS is currently being updated to the Air Tasking Order Management System ATOMS ATOMS will include an updated C2 air operations suite that will allow warfighters to perform mission planning and re-planning quickly and efficiently and will completely replace three existing applications within TBMCS the Theater Air Planner the Execution Management Re-Planner and the Master Attack Planning Toolkit The TBMCS modernization effort is part of a larger program to modernize the entire AOC which has been designated a weapon system The program objectives include improving the speed of command by automating information exchange and accelerating the integration of warfighter capabilities Expected fielding date for ATOMS is March 2015 221 Figure C-3 Theater Battle Management Core Systems Interfaces 222 AMDWS ASAS ASOC ATO C2IPS ACO AFATDS air control order Advanced Field Artillery Tactical Data System Air and Missile Defense Workstation All Source Analysis System air support operations center air tasking order Command and Control Information Processing System COP CST EMOC GCCS-A GCCS-J GCCS-M GPS IPL MAAP Common Operational Picture COP Synchronization Tool Electronic Maintenance Operation Center Global Command and Control System-Army Global Command and Control System-Joint Global Command and Control System-Maritime global positioning system imagery product library master air attack plan MIDB modernized integrated database MSCS MSIP Multiple Source Correlation System Multiple Source Interface Processor OPS Operations PCI3 Personal Computer Integrated Imagery and Intelligence SBMCS Space Battle Management Core System TACP-CAS Tactical Air Control Party - Close Air Support TAIS Tactical Airspace Integration System 6 Distributed Common Ground Surface System a The Distributed Common Ground Surface System DCGS is an architectural model for modular scaleable and interoperable multi-intelligence fullspectrum support to a JTF and below force structure The JTF DCGS Tasking Processing Exploitation and Dissemination TPED Enterprise provides structure capability descriptions standards and guidance for Service employment of ISR processing and exploitation systems operating in a secure net-centric environment Through synchronization and control of organic sensors the DCGS intelligence analysts process exploit and disseminate data generated by airborne and national collection sensors of imagery full motion video signals and MASINT The DCGS provides realtime sensor data fusion corroboration and visualization through the COP for planners and decision makers The DCGS can provide reachback support to any military operation and is a valuable contributor supporting CAS missions b The DCGS TPED Enterprise enables the complete integration of ISR capabilities and easily supports current and emerging operational requirements It supports JTF-level planning targeting execution and CA and improves flexibility in all phases of the value-added information exploitation process to achieve information and decision superiority While leveraging the synergistic capabilities of the Service DCGSs the Enterprise will also include joint coalition and national TPED elements providing broad-based or operationally-specific support within the federated exploitation concept 223 APPENDIX D DATUM AND COORDINATE SYSTEMS 1 Global Area Reference System a The Global Area Reference System GARS is an area reference system based on lines of longitude and latitude to provide an integrated common frame of reference for joint force SA and to facilitate air-to-ground operations coordination and deconfliction integration and synchronization It is important to note that GARS is primarily designed as a management tool and not to be used for navigation or targeting GARS is not a FSCM or ACM It provides the 2-D construction from which control and coordination measures can be constructed Such control measures include FSCMs ACMs JSOAs no-fly areas and maritime control measures to name several The area reference system can be a tool for rapid deconfliction within the OE The usefulness of GARS is it enables establishment of appropriate control and coordination measures b In multinational and joint operations JFCs should direct the use of GARS unless it’s determined the use of another area reference system e g locally developed area reference systems such as the Korean common grid reference system is mission critical The use of GARS will eliminate confusion regarding which system is being used in reporting areas c GARS uses a standard over-up cell address convention which brings you to a 30’x30’ cell That number-character naming convention is already in use Each quadrant 15’x15’ sub-division is depicted in its entirety on a single 1 50 000 chart There are easy to see keypad 5’x5’ sub-divisions that already exist on a 1 50 000 chart Using 5’x5’ as the smallest level of granularity makes it easy to use the 5’x5’ keypad as a building block for larger area definitions see Figure D-1 d GARS can be used to rapidly identify 1 Locations of friendly surface forces 2 Ground force maneuver boundaries 3 Areas of intended attack to include kill boxes 4 ACM or FSCM boundaries 5 NAI ISR areas of interest 6 Terrain or airspace orientation 7 Aircraft orbits and GEOREF locations 224 Figure D-1 Global Area Reference System e GARS is not a replacement for any existing reference system such as the World GEOREF or the military grid reference system nor is it used to specify precise target location or for platform weapon targeting Rather it aids in the establishment of joint fire support coordination or airspace measures GARS can be a useful tool for rapid deconfliction of operations in non-contiguous OAs such as SOF operating behind enemy lines in featureless terrain and may even be employed as a primary method to describe a contiguous OA f GARS is flexible enough to be used for a variety of purposes such as to identify littoral maritime warfare areas for anti-submarine warfare and antisurface warfare forces For additional information on area reference procedures refer to JP 2-03 Geospatial Intelligence Support to Joint Operations and ALSA MTTP for Theater Air Ground Systems 2 Target Point Mensuration a Mensuration is the act of precisely measuring something It is commonly used in targeting to refer to the exact measurement of a target’s geographical coordinates Point mensuration has always been an important part of targeting 225 since the points measured represent the JDPIs for the munitions employed As the accuracy of weapons delivery has improved the importance of mensuration has grown in proportion and is a vital part of targeting Due to the potential consequences of inaccurately mensurating coordinates the CJCS has mandated those involved in point mensuration be certified to do it according to CJCS instructions When accomplished before ATO execution it permits employment of an entire class of weapons such as GPS-aided weapons and cruise missiles that guide to pre-set coordinates This allows JAOC personnel to significantly shorten the dynamic targeting “kill chain” GPS-aided weapons are not so much “smart” as they are “obedient” They guide to the mensurated point they are programmed to attack so accurate mensuration is vital to their employment However mensuration is not required for the accurate employment of all weapons b Because mensuration is a form of measurement errors are inevitable and the extent of the estimated error must be captured as part of the coordinate The standard method endorsed by the NGA is to express coordinate accuracy as a circular error and vertical accuracy as a “linear error” LE to a 90 percent degree of certainty circular error LE 90% When the NGA validates a mensuration software algorithm it is actually the fidelity of the circular error LE accuracy estimates over a range of mensuration situations that is judged These estimates are used during weaponeering to derive type and quantity of weapons and targeting coordinate data must be considered incomplete without them The MIDB and the ATO both have coordinate accuracy fields for this reason c The effort to mensurate coordinates especially for a target set with a large number of JDPIs can be extremely intensive Technological advances have helped shorten the effort somewhat but for the time being it will remain manpower-intensive and time-intensive If this planning is not conducted beforehand it may adversely affect the JAOC’s battle rhythm or even unit mission planning Conversely targeteers may become rushed leading to mensuration errors that prevent effective employment or have unwanted effects like collateral damage Targeteers will not know what munitions will be used to prosecute a target thus the more precise they are in mensurating coordinates the more options they will give targeteers Again this effect is magnified during dynamic targeting For additional guidance on individual and organizational target coordinate mensuration and certification for unilateral and joint operations refer to CJCSI 3505 0B1 Target Coordination Mensuration Certification 226 3 Basic Encyclopedia Number a All targeteers should understand the theater basic encyclopedia BE number plan While many targets already have BE numbers assigned many identified during combat do not have them Without an established plan for assigning BE numbers components may take it upon themselves to assign them creating the potential for confusion and lack of SA on what targets are being struck Confusion can adversely affect battle rhythm or worse result in targeting errors b Standard joint desired point of impact JDPI numbering is also important and the joint targeting committee is finalizing the adoption of the joint designated point of impact concept using a six-character format with a central numbering registry involving the joint commands and allied nations A theater designated point of impact registry will ensure standardization of designated point of impacts and eliminate duplication and possible errors The convention should address both static and mobile targets c It is usually not feasible to assign standard BE numbers to mobile targets However for proper database management such mobile targets still require some sort of identification While the numbers may not be actual BE numbers the theater must still have some way of identifying the target Again planners should understand the theater naming convention to minimize targeting errors and the time needed for effective air planning 227 APPENDIX E REFERENCES The development of the Joint Targeting School JTS Student Guide is based upon the following primary references 1 Department of Defense Issuances a Defense Intelligence Agency Publication DI-2820-4-03 Battle Damage Assessment BDA Quick Guide b Defense Intelligence Agency Publication DI-2800-2-YR Critical Elements of Selected Generic Installations Critical Elements Handbook SECRET c Military Standard MIL-STD -6040 United States Message Text Formatting 2 Chairman of the Joint Chiefs of Staff Directives a CJCSI 3121 01 Series Standing Rules of Engagement Standing Rules for the Use of Force for US Forces SECRET b CJCSI 3122 06 Series Sensitive Target Approval and Review STAR Process SECRET c CJCSI 3160 01 Series No-Strike and the Collateral Damage Estimation Methodology For Official Use Only d CJCSI 3210 01 Series Joint Information Operations Policy U SECRET e CJCSI 3370 01 Target Development Standards For Official Use Only f CJCSI 3505 01 Series Target Coordinate Mensuration Certification and Program Accreditation g CJCSI 3900 01 Series Position Point and Area Reference Procedures h CJCSI 6241 04 Series Policy and Procedures for Management and Use of United States Message Text Formatting i CJCSM 3130 03 Adaptive Planning and Execution APEX Planning Formats and Guidance j CJCSM 3162 01 Series Joint Methodology for Battle Damage Assessment 3 Joint Publications 228 a JP 1 Doctrine for the Armed Forces of the United States b JP 2-0 Joint Intelligence c JP 2-01 Joint and National Intelligence Support to Military Operations d JP 2-01 3 Joint Intelligence Preparation of the Operational Environment e JP 2-03 Geospatial Intelligence in Joint Operations f JP 3-0 Joint Operations g JP 3-01 Countering Air and Missile Threats h JP 3-03 Joint Interdiction i JP 3-05 Special Operations j JP 3-05 1 Joint Special Operations Task Force Operations k JP 3-09 Joint Fire Support l JP 3-09 3 Close Air Support m JP 3-12 Cyberspace Operations SECRET n JP 3-13 Information Operations o JP 3-13 1 Electronic Warfare p JP 3-13 2 Military Information Support Operations q JP 3-13 3 Operations Security r JP 3-14 Space Operations s JP 3-30 Command and Control for Joint Air Operations t JP 3-31 Command and Control for Joint Land Operations u JP 3-32 Command and Control of Joint Maritime Operations v JP 3-33 Joint Task Force Headquarters w JP 3-52 Joint Airspace Control x JP 3-59 Meteorological and Oceanographic Operations 229 y JP 3-60 Joint Targeting z JP 5-0 Joint Operation Planning aa JP 6-0 Joint Communications System bb JP 6-01 Joint Electromagnetic Spectrum Management Operations 4 Multi-Service Publications a ATP 3-06 1 FM 3-06 1 MCRP 3-35 3A NTTP 3-01 04 AFTTP I 3-2 29 Multi-Service Tactics Techniques and Procedures for Aviation Urban Operations b ATP 3-09 32 FM 3-09 32 MCRP 3-16 6A NTTP 3-09 2 AFTTP I 3-2 6 Multi-Service Tactics Techniques and Procedures for the Joint Application of Firepower c ATP 3-55 6 FM 3-55 6 MCRP 2-24A NTTP 3-55 13 AFTTP I 3-2 2 Multi-Service Tactics Techniques and Procedures for Airborne Target Coordination and Attack Radar Systems d ATP 3-60 1 FM 3-60 1 MCRP 3-16D NTTP 3-60 1 AFTTP 3-2 3 MultiService Tactics Techniques and Procedures for Dynamic Targeting e ATTP 3-13 10 FM 3-13 10 MCRP 3-40 5A NTTP 3-51 2 AFTTP 3-2 7 Multi-Service Tactics Techniques and Procedures for Reprogramming of Electronic Warfare EW Systems f FM 3-01 15 MCRP 3-25E NTTP 3-01 8 AFTTP 3-2 31 Multi-Service Tactics Techniques and Procedures for an Integrated Air Defense System g FM 3-01 4 MCRP 3-22 2A NTTP 3-01 42 AFTTP I 3-2 28 Multi-Service Tactics Techniques and Procedures for the Suppression of Enemy Air Defenses in a Joint Environment SECRET h FM 3-09 34 MCRP 3-25H NTTP 3-09 2 1 AFTTP 3-2 59 Multi-Service Tactics Techniques and Procedures for Kill Box Employment i FM 3-52 1 AFTTP 3-2 78 Multi-Service Tactics Techniques and Procedures for Airspace Control j FM 3-52 2 NTTP 3-56 2 AFTTP I 3-2 17 Multi-Service Tactics Techniques and Procedures for the Theater Air Ground System 230 5 Army a Army Doctrine Publication ADP 3-09 Fires b ADP 5-0 The Operations Process c ATTP 2-01 Planning Requirements and Assessment Collection d ATTP 3-09 13 The Battlefield Coordination Detachment e FM 3-31 Joint Land Force Component Commander Handbook JFLCC f FM 3-60 FM 6-20-10 The Targeting Process g Training Circular TC 3-09 31 Fire Support Training for the Brigade Combat Team Commander 6 Air Force a AFD Annex 3-0 Operations and Planning b AFD Annex 3-01 Counterair Operations c AFD Annex 3-30 Command and Control d AFD Annex 3-52 Airspace Control e AFD Annex 3-60 Targeting 7 Navy a NTTP 3-02 1 3 Amphibious Expeditionary Operations Air Control b NTTP 3-03 4 Rev A Naval Strike and Air Warfare SECRET c NTTP 3-03 4 1 Global Positioning System GPS and Precision-Guided Munitions PGM Targeting SECRET d NTTP 3-32 1 Maritime Operations Center e NWP 3-09 Navy Fire Support f NWP 3-56 Composite Warfare Doctrine g NWP 5-01 Navy Planning 8 Marine Corps 231 a MCDP 1-0 Marine Corps Operations b MCWP 3-40 7 Joint Force Land Component Commander Handbook JFLCC c MCWP 3-40 8 Marine Corps Componency d MCWP 3-43 3 Marine Air-Ground Task Force Fires 9 Non-Secure Internet Protocol Router Network a MIDB products https www fas org irp program disseminate midb htm b MIDB interfaces http jitc fhu disa mil gccsiop interfaces midb pdf c Seffers George I U S Air Force Races to Modernize Critical Battle Control System SIGNAL Online Magazine Armed Forces Communications and Electronics Association 1 Aug 2013 http www afcea org content q node 11453 232 GLOSSARY PART I – ABBREVIATIONS AND ACRONYMS AADC AAGS ABP ACA ACCE ACE ACM ACMREQ ACO ACP ACS AD ADCON ADP AE AECT AETF AFATDS AFD AFFOR AFTTP AFTTP I AGM AI ALCT ALLOREQ ALO AMCT AMD AO AOA AOC AOD AODB AOR APEX ARCT ARFOR ASCC ASOC ASWC ATACMS ATF ATI area air defense commander Army air-ground system air battle plan airspace control authority air component coordination element aviation combat element USMC airspace coordinating measure airspace control means request airspace control order airspace control plan airspace control system air defense administrative control air defense plan aeromedical evacuation aeromedical evacuation control team air and space expeditionary task force Advanced Artillery Tactical Data System Air Force Doctrine Air Force forces Air Force tactics techniques and procedures Air Force tactics techniques and procedures instruction attack guidance matrix air interdiction airlift control team allocation request air liaison officer air mobility control team air mobility division area of operations amphibious objective area air operations center air operations directive air operations database area of responsibility Adaptive Planning and Execution air refueling control team Army forces Army Service component commander air support operations center anti-submarine warfare commander Army Tactical Missile System amphibious task force asset target interaction 233 ATO ATOMS ATP ATTP air tasking order Air Tasking Order Management System Army training publication Army tactics techniques and procedures BCD BCT BDA BDAREP BE BWC battlefield coordination detachment brigade combat team battle damage assessment battle damage assessment report basic encyclopedia battle watch captain C2 CA CAP CAS CCDR CCIR CCMD CDA CDE CDM CDRJSOTF CE CF CF-COP CFL CIA CID CJCS CJCSI CLF CM CMO CO COA COD COG COMAFFOR CONOPS CONUS COP COPS CPCL CPD CR CSA command and control combat assessment crisis action planning close air support combatant commander commander's critical information requirement combatant command collateral damage assessment collateral damage estimation collateral damage methodology commander joint special operations task force command element MAGTF conventional forces counterfire common operational picture coordinated fire line Central Intelligence Agency combat identification Chairman of the Joint Chiefs of Staff Chairman of the Joint Chiefs of Staff instruction commander landing force collection manager civil-military operations cyberspace operations course of action combat operations division center of gravity commander Air Force forces concept of operations continental United States common operational picture current operations component prioritized collection list combat plans division collection requirement combat support agency 234 CSS CTL CV CWC Central Security Service candidate target list critical vulnerability composite warfare commander D3A DASC DCA DCO DCGS DHS DIA DNI DOD DODIN DOS DPI DS DT DTRA decide detect deliver and assess direct air support center defensive counterair defensive cyberspace operations Distributed Common Ground Surface System Department of Homeland Security Defense Intelligence Agency Director of National Intelligence Department of Defense Department of Defense information networks Department of State desired point of impact direct support dynamic targeting Defense Threat Reduction Agency EA EID EM EMS EOB ETF EW EZM electronic attack entity identification electromagnetic electromagnetic spectrum enemy order of battle electronic target folder electronic warfare engagement zone manager F2T2EA FA FF FFCC FM FOC FPC FRAGORD FSA FSC FSCC FSCL FSCM FSE FSS find fix track target engage and assess field artillery Firefox force fires coordination center USMC field manual future operations center future plans cell fragmentary order fire support area fire support coordinator fire support coordination center fire support coordination line fire support coordination measure fire support element fire support station 235 G-3 GCE GEOINT GEOREF GPS Army or Marine Corps component operations staff officer Army division or higher staff Marine Corps brigade or higher staff Global Area Reference System geographic combatant commander Global Command and Control System Global Command and Control System Integrated Intelligence and Imagery ground combat element MAGTF geospatial intelligence geographic reference Global Positioning System HPT HQ HVI HVT high-payoff target headquarters high-value individual high-value target I W IA IADS IC ICT IGO IMINT INR IO IR IRC ISE ISR ISRD IT indications and warning information assurance integrated air defense system intelligence community information and communications technology intergovernmental organization imagery intelligence Bureau of Intelligence and Research DOS information operations intelligence requirement information-related capability intelligence support element intelligence surveillance and reconnaissance intelligence surveillance and reconnaissance division information technology J-2 J-3 J-4 J-5 JACCE JADOCS JAO JAOC JAOP JCC JDPI JECB JEMSO intelligence directorate of a joint staff operations directorate of a joint staff logistics directorate of a joint staff plans directorate of a joint staff joint air component coordination element Joint Automated Deep Operations Coordination System joint air operations joint air operations center joint air operations plan joint cyber center joint desired point of impact Joint Effects Coordination Board joint electromagnetic spectrum operations GARS GCC GCCS GCCS-I3 236 JFACC JFC JFE JFHQ JFLCC JFMCC JFSOCC JIOC JIOWC JIPCL JIPOE JTF JTL JTT JTWG JWAC joint force air component commander joint force commander joint fires element joint force headquarters joint force land component commander joint force maritime component commander joint force special operations component commander joint intelligence operations center Joint Information Operations Warfare Command joint integrated prioritized collection list joint intelligence preparation of the operational environment joint integrated prioritized target list joint intelligence support element Joint Munitions Effectiveness Manual joint operations area joint operations center joint operation planning process joint publication Joint Staff joint special operations area Joint Special Operations Task Force Joint Surveillance Target Attack Radar System joint targeting cycle joint targeting coordination board Joint Technical Coordinating Group for Munitions Effectiveness joint task force joint target list joint targeting toolbox joint targeting working group Joint Warfare Analysis Center LE LF LHA LHD LNO LOC LOO LOW linear error landing force amphibious assault ship general purpose amphibious assault ship multipurpose liaison officer line of communication line of operations law of war MAAP MACCS MAGTF MARFOR MARLE master air attack plan Marine air command and control system Marine air-ground task force Marine Corps forces Marine liaison element JIPTL JISE JMEM JOA JOC JOPP JP JS JSOA JSOTF JSTARS JTC JTCB JTCG ME 237 MASINT MCC MCDP MCRP MCWP MEA MEB MEF MEU MI MIDB MILDEC MIOC MISO MISREP MOC MOE MOP MPA MPG measurement and signature intelligence maritime component commander Marine Corps doctrinal publication Marine Corps reference publication Marine Corps warfighting publication munitions effectiveness assessment Marine Expeditionary Brigade Marine Expeditionary Force Marine Expeditionary Unit military intelligence modernized integrated database military deception maritime intelligence operations center military information support operations mission report maritime operations center measure of effectiveness measure of performance maritime patrol aircraft maritime planning group NAI NALE NASIC NATO NAVFOR NAVWAR NCC NFA NGA NGO NJOIC NLRP NLT NSA NSFS NSL NTACS NTTP NWP named area of interest Naval and Amphibious Liaison Element National Air and Space Intelligence Center North Atlantic Treaty Organization Navy forces navigation warfare Navy component commander no-fire area National Geospatial-Intelligence Agency nongovernmental organization National Joint Operations and Intelligence Center nonlethal reference point not later than National Security Agency naval surface fire support no-strike list naval tactical air control system Navy tactics techniques and procedures Navy warfare publication OA OCA OCO OE OMA OPCON operational area offensive counterair offensive cyberspace operations operational environment Office of Military Affairs operational control 238 OPFOR OPLAN OPORD OPSEC OTC opposing force operation plan operation order operations security officer in tactical command PA PD PID PIR PL PMESII PNT POL PR public affairs probability of damage positive identification priority intelligence requirement phase line political military economic social information and infrastructure positioning navigation and timing petroleum oil and lubricant personnel recovery RFA ROE RR RTL RUF restrictive fire area rules of engagement reattack recommendations restricted target list rules for the use of force SA SC SCA SD SEAD SecDef SIDO SIGINT SJA SME SO SOF SOLE SORTIEALOT SPINS STAR STO STWC SUW SUWC situational awareness strategic communication space coordinating authority strategy division suppression of enemy air defenses Secretary of Defense senior intelligence duty officer signals intelligence staff judge advocate subject matter expert special operations special operations forces special operations liaison element sortie allotment message special instructions sensitive target approval and review special technical operations strike warfare commander surface warfare surface warfare commander TACC tactical air control center USN tactical air command center USMC tactical control TACON 239 TACP TACS TADC TAGS TAI TAOC TBMCS TCIM TDN TET TF TLAM TLE TLM TM TNL TOO TOT TPED TSA TSC TSG TSM TSS TST tactical air control party theater air control system tactical air direction center theater air-ground system target area of interest Tactical air operations center theater battle management core system Tactical Communication Interface Module target development nomination targeting effects team task force Tomahawk land attack missile target location error target list management target material target nomination list targets of opportunity time on target Tasking Processing Exploitation and Dissemination target system analysis Tomahawk land-attack missile strike coordinator target support group targeting synchronization matrix target selection standards time-sensitive target UAS US USG USMC USMTF unmanned aircraft system United States United States Government United States Marine Corps United States message text format WMD weapons of mass destruction ZF zone of fire 240 PART II – TERMS AND DEFINITIONS Adaptive Planning and Execution System A Department of Defense system of joint policies processes procedures and reporting structures supported by communications and information technology that is used by the joint planning and execution community to monitor plan and execute mobilization deployment employment sustainment redeployment and demobilization activities associated with joint operations Also called APEX system JP 5-0 air interdiction Air operations conducted to divert disrupt delay or destroy the enemy’s military potential before it can be brought to bear effectively against friendly forces or to otherwise achieve objectives that are conducted at such distance from friendly forces that detailed integration of each air mission with the fire and movement of friendly forces is not required Also called AI JP 3-03 airspace control area Airspace that is laterally defined by the boundaries of the operational area and may be subdivided into airspace control sectors JP 3-01 airspace control authority The commander designated to assume overall responsibility for the operation of the airspace control system in the airspace control area Also called ACA JP 3-52 airspace control plan The document approved by the joint force commander that provides specific planning guidance and procedures for the airspace control system for the joint force operational area Also called ACP JP 3-52 airspace coordinating measure Measure employed to facilitate the efficient use of airspace to accomplish missions and simultaneously provide safeguards for friendly forces Also called ACM JP 3-52 airspace coordination area A three-dimensional block of airspace in a target area established by the appropriate ground commander in which friendly aircraft are reasonably safe from friendly surface fires The airspace coordination area may be formal or informal Also called ACA JP 3-09 3 air tasking order A method used to task and disseminate to components subordinate units and command and control agencies projected sorties capabilities and or forces to targets and specific missions Normally provides specific instructions to include call signs targets controlling agencies etc as well as general instructions Also called ATO JP 3-30 air apportionment The determination and assignment of the total expected effort by percentage and or by priority that should be devoted to the various air operations for a given period of time JP 5-0 241 assessment 1 A continuous process that measures the overall effectiveness of employing joint force capabilities during military operations 2 Determination of the progress toward accomplishing a task creating an effect or achieving an objective 3 Analysis of the security effectiveness and potential of an existing or planned intelligence activity 4 Judgment of the motives qualifications and characteristics of present or prospective employees or “agents ” JP 3-0 battle damage assessment The estimate of damage composed of physical and functional damage assessment as well as target system assessment resulting from the application of lethal or nonlethal military force Also called BDA JP 3-0 candidate target list A list of objects or entities submitted by component commanders appropriate agencies or the joint force commander’s staff for further development and inclusion on the joint target list and or restricted target list or moved to the no-strike list Also called CTL JP 3-60 center of gravity The source of power that provides moral or physical strength freedom of action or will to act Also called COG JP 5-0 close air support Air action by fixed- and rotary-wing aircraft against hostile targets that are in close proximity to friendly forces and that require detailed integration of each air mission with the fire and movement of those forces Also called CAS JP 3-0 collateral damage Unintentional or incidental injury or damage to persons or objects that would not be lawful military targets in the circumstances ruling at the time JP 3-60 combat assessment The determination of the overall effectiveness of force employment during military operations Combat assessment is composed of three major components a battle damage assessment b munitions effectiveness assessment and c reattack recommendation Also called CA JP 3-60 concept of operations A verbal or graphic statement that clearly and concisely expresses what the joint force commander intends to accomplish and how it will be done using available resources Also called CONOPS JP 5-0 coordinated fire line A line beyond which conventional and indirect surface fire support means may fire at any time within the boundaries of the establishing headquarters without additional coordination The purpose of the coordinated fire line is to expedite the surface-to-surface attack of targets beyond the coordinated fire line without coordination with the ground commander in whose area the targets are located Also called CFL JP 3-09 course of action 1 Any sequence of activities that an individual or unit may follow 2 A scheme developed to accomplish a mission 3 A product of the course-of-action 242 development step of the joint operation planning process JP 5-0 Also called COA critical capability A means that is considered a crucial enabler for a center of gravity to function as such and is essential to the accomplishment of the specified or assumed objective s JP 5-0 critical requirement An essential condition resource and means for a critical capability to be fully operational JP 5-0 critical vulnerability An aspect of a critical requirement which is deficient or vulnerable to direct or indirect attack that will create decisive or significant effects JP 5-0 cyberspace operations The employment of cyberspace capabilities where the primary purpose is to achieve objectives in or through cyberspace Also called CO JP 3-0 defensive cyberspace operations Passive and active cyberspace operations intended to preserve the ability to utilize friendly cyberspace capabilities and protect data networks net-centric capabilities and other designated systems Also called DCO JP 3-12 decision support template A combined intelligence and operations graphic based on the results of wargaming The decision support template depicts decision points timelines associated with the movement of forces and the flow of the operation and other key items of information required to execute a specific friendly course of action JP 201 3 decisive point A geographic place specific key event critical factor or function that when acted upon allows commanders to gain a marked advantage over an adversary or contribute materially to achieving success JP 5-0 defensive counterair All defensive measures designed to neutralize or destroy enemy forces attempting to penetrate or attack through friendly airspace Also called DCA JP 3-01 Department of Defense information networks The globally connected end-to-end set of information capabilities and processes for collecting processing storing disseminating and managing information on-demand to warfighters policy makers and support personnel including owned and leased communications and computing systems and services software including applications data and security Also called DODIN JP 3-12 desired point of impact A precise point associated with a target and assigned as the impact point for a single unitary weapon to create a desired effect Also called DPI JP 3-60 243 dynamic targeting Targeting that prosecutes targets identified too late or not selected for action in time to be included in deliberate targeting JP 3-60 dynamic threat assessment An intelligence assessment developed by the Defense Intelligence Agency that details the threat capabilities and intentions of adversaries in each of the priority plans in the Joint Strategic Capabilities Plan Also called DTA JP 2-0 effect 1 The physical or behavioral state of a system that results from an action a set of actions or another effect 2 The result outcome or consequence of an action 3 A change to a condition behavior or degree of freedom JP 3-0 electronic attack Division of electronic warfare involving the use of electromagnetic energy directed energy or antiradiation weapons to attack personnel facilities or equipment with the intent of degrading neutralizing or destroying enemy combat capability and is considered a form of fires Also called EA JP 3-13 1 end state The set of required conditions that defines achievement of the commander’s objectives JP 3-0 fires The use of weapon systems to create a specific lethal or nonlethal effect on a target JP 3-09 fire support Fires that directly support land maritime amphibious and special operations forces to engage enemy forces combat formations and facilities in pursuit of tactical and operational objectives JP 3-09 fire support coordination The planning and executing of fire so that targets are adequately covered by a suitable weapon or group of weapons JP 3-09 fire support coordination center A single location in which are centralized communications facilities and personnel incident to the coordination of all forms of fire support Also called FSCC JP 3-09 fire support coordination line A fire support coordination measure that is established and adjusted by appropriate land or amphibious force commanders within their boundaries in consultation with superior subordinate supporting and affected commanders Fire support coordination lines facilitate the expeditious attack of surface targets of opportunity beyond the coordinating measure A fire support coordination line does not divide an area of operations by defining a boundary between close and deep operations or a zone for close air support The fire support coordination line applies to all fires of air land and sea-based weapon systems using any type of ammunition Forces attacking targets beyond a fire support coordination line must inform all affected commanders in sufficient time to allow necessary reaction to avoid fratricide Supporting elements attacking targets beyond the fire support coordination line must ensure that the attack will not produce adverse effects on or to the rear of the line Short of a fire support coordination line all air-to-ground and surface-to-surface attack operations are 244 controlled by the appropriate land or amphibious force commander The fire support coordination line should follow well-defined terrain features Coordination of attacks beyond the fire support coordination line is especially critical to commanders of air land and special operations forces In exceptional circumstances the inability to conduct this coordination will not preclude the attack of targets beyond the fire support coordination line However failure to do so may increase the risk of fratricide and could waste limited resources Also called FSCL JP 3-09 fire support coordination measure A measure employed by to facilitate the rapid engagement of targets and simultaneously provide safeguards for friendly forces Also called FSCM JP 3-0 fragmentary order An abbreviated form of an operation order issued as needed after an operation order to change or modify that order or to execute a branch or sequel to that order Also called FRAGORD JP 5-0 Global Command and Control System A deployable command and control system supporting forces for joint and multinational operations across the range of military operations with compatible interoperable and integrated communications systems Also called GCCS JP 6-0 high-payoff target A target whose loss to the enemy will significantly contribute to the success of the friendly course of action Also called HPT JP 3-60 high-value target A target the enemy commander requires for the successful completion of the mission Also called HVT JP 3-60 information operations The integrated employment during military operations of information-related capabilities in concert with other lines of operation to influence disrupt corrupt or usurp the decision-making of adversaries and potential adversaries while protecting our own Also called IO JP 3-13 interdiction 1 In support of law enforcement activities conducted to divert disrupt delay intercept board detain or destroy under lawful authority vessels vehicles aircraft people cargo and money JP 3-0 joint air operations Air operations performed with air capabilities forces made available by components in support of the joint force commander’s operation or campaign objectives or in support of other components of the joint force Also called JAO JP 3-30 joint air operations center A jointly staffed facility established for planning directing and executing joint air operations in support of the joint force commander’s operation or campaign objectives Also called JAOC JP 3-30 245 joint air operations plan A plan for a connected series of joint air operations to achieve the joint force commander’s objectives within a given time and joint operational area Also called JAOP JP 3-30 joint fires Fires delivered during the employment of forces from two or more components in coordinated action to produce desired effects in support of a common objective JP 3-0 joint fires element An optional staff element that provides recommendations to the operations directorate to accomplish fires planning and synchronization Also called JFE JP 3-60 joint fire support Joint fires that assist air land maritime and special operations forces to move maneuver and control territory populations airspace and key waters JP 3-0 joint force commander A general term applied to a combatant commander subunified commander or joint task force commander authorized to exercise combatant command command authority or operational control over a joint force Also called JFC JP 1 joint integrated prioritized target list A prioritized list of targets approved and maintained by the joint force commander Also called JIPTL JP 3-60 joint intelligence preparation of the operational environment The analytical process used by joint intelligence organizations to produce intelligence assessments estimates and other intelligence products in support of a joint force commander’s decision making process It is a continuous process that includes defining the operational environment describing the effects of the operational environment evaluating the adversary and determining and describing adversary potential courses of action Also called JIPOE JP 2-01 3 joint operation planning process An orderly analytical process that consists of a logical set of steps to analyze a mission select the best course of action and produce a joint operation plan or order Also called JOPP JP 5-0 joint targeting coordination board A group formed by the joint force commander to accomplish broad targeting oversight functions that may include but are not limited to coordinating targeting information providing targeting guidance synchronization and priorities and refining the joint integrated prioritized target list Also called JTCB JP 3-60 joint target list A consolidated list of selected targets upon which there are no restrictions placed considered to have military significance in the joint force commander’s operational area Also called JTL JP 3-60 246 joint task force A joint force that is constituted and so designated by the Secretary of Defense a combatant commander a subunified commander or an existing joint task force commander Also called JTF JP 1 line of operation 1 A line that defines the interior or exterior orientation of the force in relation to the enemy or that connects actions on nodes and or decisive points related in time and space to an objective s Also called LOO JP 5-0 link 1 A behavioral physical or functional relationship between nodes 2 In communications a general term used to indicate the existence of communications facilities between two points 3 A maritime route other than a coastal or transit route which links any two or more routes JP 3-0 master air attack plan A plan that contains key information that forms the foundation of the joint air tasking order Also called MAAP JP 3-60 measure of effectiveness A criterion used to assess changes in system behavior capability or operational environment that is tied to measuring the attainment of an end state achievement of an objective or creation of an effect Also called MOE JP 3-0 measure of performance A criterion used to assess friendly actions that is tied to measuring task accomplishment Also called MOP JP 3-0 mensuration The process of measurement of a feature or location on the earth to determine an absolute latitude longitude and elevation For targeting applications the errors inherent in both the source for measurement as well as the measurement processes must be understood and reported JP 3-60 military information support operations Planned operations to convey selected information and indicators to foreign audiences to influence their emotions motives objective reasoning and ultimately the behavior of foreign governments organizations groups and individuals in a manner favorable to the originator’s objectives Also called MISO JP 3-13 2 mission type order 1 An order issued to a lower unit that includes the accomplishment of the total mission assigned to the higher headquarters 2 An order to a unit to perform a mission without specifying how it is to be accomplished JP 3-50 munitions effectiveness assessment Conducted concurrently and interactively with battle damage assessment the assessment of the military force applied in terms of the weapon system and munitions effectiveness to determine and recommend any required changes to the methodology tactics weapon system munitions fusing and or weapon delivery parameters to increase force effectiveness Munitions effectiveness assessment is primarily the responsibility of operations with required inputs and coordination from the intelligence community Also called MEA JP 2-01 247 named areas of interest The geospatial area or systems node or link against which information that will satisfy a specific information requirement can be collected Named areas of interest are usually selected to capture indications of adversary courses of action but also may be related to conditions of the operational environment Also called NAI JP 2-01 3 naval surface fire support Fire provided by Navy surface gun and missile systems in support of a unit or units Also called NSFS JP 3-09 3 node 1 A location in a mobility system where a movement requirement is originated processed for onward movement or terminated 2 In communications and computer systems the physical location that provides terminating switching and gateway access services to support information exchange 3 An element of a system that represents a person place or physical thing JP 3-0 no-fire area An area designated by the appropriate commander into which fires or their effects are prohibited Also called NFA JP 3-09 3 no-strike list A list of objects or entities characterized as protected from the effects of military operations under international law and or rules of engagement Also called NSL JP 3-60 objective 1 The clearly defined decisive and attainable goal toward which every operation is directed 2 The specific target of the action taken which is essential to the commander’s plan JP 5-0 offensive counterair Offensive operations to destroy disrupt or neutralize enemy aircraft missiles launch platforms and their supporting structures and systems both before and after launch but as close to their source as possible Also called OCA JP 301 offensive cyberspace operations Cyberspace operations intended to project power by the application of force in or through cyberspace Also called OCO JP 3-12 operational area An overarching term encompassing more descriptive terms such as area of responsibility and joint operations area for geographic areas in which military operations are conducted Also called OA JP 3-0 operational art The cognitive approach by commanders and staffs—supported by their skill knowledge experience creativity and judgment—to develop strategies campaigns and operations and organize and employ military forces by integrating ends ways and means JP 3-0 operational design The conception and construction of the framework that underpins a campaign or major operation plan and its subsequent execution JP 5-0 248 operational environment A composite of the conditions circumstances and influences that affect the employment of capabilities and bear on the decisions of the commander Also called OE JP 3-0 operation order A directive issued by a commander to subordinate commanders for the purpose of effecting the coordinated execution of an operation Also called OPORD JP 5-0 operation plan 1 Any plan for the conduct of military operations prepared in response to actual and potential contingencies 2 A complete and detailed joint plan containing a full description of the concept of operations all annexes applicable to the plan and a time-phased force and deployment data Also called OPLAN JP 5-0 restricted target A valid target that has specific restrictions placed on the actions authorized against it due to operational considerations JP 3-60 restricted target list A list of restricted targets nominated by elements of the joint force and approved by the joint force commander or directed by higher authorities Also called RTL JP 3-60 restrictive fire area An area in which specific restrictions are imposed and into which fires that exceed those restrictions will not be delivered without coordination with the establishing headquarters Also called RFA JP 3-09 restrictive fire line A line established between converging friendly surface forces that prohibits fires or their effects across that line Also called RFL JP 3-09 rules of engagement Directives issued by competent military authority that delineate the circumstances and limitations under which United States forces will initiate and or continue combat engagement with other forces encountered Also called ROE JP 104 scheduled target Planned target upon which fires or other actions are scheduled for prosecution at a specified time JP 3-60 special operations forces Those Active and Reserve Component forces of the Military Services designated by the Secretary of Defense and specifically organized trained and equipped to conduct and support special operations Also called SOF JP 3-05 1 system A functionally physically and or behaviorally related group of regularly interacting or interdependent elements that group of elements forming a unified whole JP 3-0 target 1 An entity or object considered for possible engagement or other action 2 In intelligence usage a country area installation agency or person against which 249 intelligence operations are directed 3 An area designated and numbered for future firing 4 In gunfire support usage an impact burst that hits the target JP 3-60 target acquisition The detection identification and location of a target in sufficient detail to permit the effective employment of weapons Also called TA JP 3-60 target analysis An examination of potential targets to determine military importance priority of attack and weapons required to obtain a desired level of damage or casualties JP 3-60 target area of interest The geographical area where high-value targets can be acquired and engaged by friendly forces Not all target areas of interest will form part of the friendly course of action only target areas of interest associated with high priority targets are of interest to the staff These are identified during staff planning and wargaming Target areas of interest differ from engagement areas in degree Engagement areas plan for the use of all available weapons target areas of interest might be engaged by a single weapon Also called TAI JP 2-01 3 targeting The process of selecting and prioritizing targets and matching the appropriate response to them considering operational requirements and capabilities JP 3-0 target nomination list A prioritized list of targets drawn from the joint target list and nominated by component commanders appropriate agencies or the joint force commander’s staff for inclusion on the joint integrated prioritized target list Also called TNL JP 3-60 target system analysis An all-source examination of potential target systems to determine relevance to stated objectives military importance and priority of attack Also called TSA JP 3-60 time-sensitive target A joint force commander validated target or set of targets requiring immediate response because it is a highly lucrative fleeting target of opportunity or it poses or will soon pose a danger to friendly forces Also called TST JP 3-60 validation 1 A process associated with the collection and production of intelligence that confirms that an intelligence collection or production requirement is sufficiently important to justify the dedication of intelligence resources does not duplicate an existing requirement and has not been previously satisfied 2 A part of target development that ensures all vetted targets meet the objectives and criteria outlined in the commander’s guidance and ensures compliance with the law of armed conflict and rules of engagement 3 In computer modeling and simulation the process of determining the degree to which a model or simulation is an accurate representation of the real world from the perspective of the intended uses of the model or simulation 4 Execution procedure whereby all the information records in a time-phased force and deployment data are confirmed error free and accurately reflect the current status attributes and availability of units and requirements JP 3-60 250 vetting A part of target development that assesses the accuracy of the supporting intelligence to targeting JP 3-60 weaponeering The process of determining the quantity of a specific type of lethal or nonlethal weapons required to create a desired effect on a given target JP 3-60 zone of fire An area into which a designated ground unit or fire support ship delivers or is prepared to deliver fire support Fire may or may not be observed Also called ZF JP 3-09 251